Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.     

The effects of carbon dioxide leakage on fractures, and water quality of potable aquifers during geological sequestration of CO2

Since industrial revolution, the ＂greenhouse effect＂ is one of the most important global environmental issues. Of all the greenhouse gases, CO2 is responsible for about 64% of the enhanced ＂greenhouse effect＂, making it the target for mitigation, so reducing anthropogenic discharge of carbon dioxide attracts more and more attention. Geological sequestration of CO2 in deep saline aquifers is one of the most promising options. But because unknown fractures and faults may exist in the caprock layers which can prevent the leakage of CO2, CO2 will leak upward into upper potable aquifers, and lead to adverse impacts on the shallow potable aquifers. In order to assess the potential effect of CO2 leakage from underground storage reservoirs on fractures and water quality of potable aquifers, this study used the non-isothermal reactive geochemical transport code TOUGHREACT developed by Xu et al to establish a simplified 2-D model of CO2 underground sequestration system, which includes deep saline aquifers, caprock layers, and shallow potable aquifers, and study and analyze the changes of mineral and aqueous components. The simulation results indicated that the minerals of deep saline aquifers and fractures should be mainly composed of aluminosilicate and silicate minerals, which not only enhance the mass of CO2 sequestrated by mineral trapping, but also decrease the porosity and permeability of caprock layers and fractures to prevent and reduce CO2 leakage. The results from deep saline aquifers showed that the mass of carbon dioxide trapped by minerals and solution phases is limited, the rest remained as a supercritical phase, and so once the caprock aquifers have some unknown fractures, the free carbon dioxide phase may leak from CO2 geologic sequestration reservoirs by buoyancy.     

Geochemistry of soils derived from black shale, central Hunan, China

The black shale formed under anoxic conditions usually contains high concentrations of many metals. Weathering of such black shale might cause the emission of many metals. Moreover, soils derived from black shale （SBS） are believed to be affected by black shale weathering. In recent years, many studies such as Lee et al. （2002）, Woo et al. （2002）, Fang et al. （2002）, Pasava et al. （2003）, and Peng et al. （2004） have approached the heavy metal contaminations of SBS, but systematical geochemical study is rare. Presently, the SBS and its corresponding black shales （CBS） were both sampled from central Hunan （China）, and analyzed for a large number of elements, using an Elan6000 ICP-MS/AES machine at Guangzhou Institute of Geochemistry, CAS. In this paper, some preliminary results are reported. The analytical results show that the SBS in central Hunan contains very high concentrations of heavy metals such as Co, Cu, Hg, Mo, Pb, Zn, U, Th, Sb, T1, Cd, Cr, Sc, V, Sn, As, Se, and Ni.     

Heavy metal contamination in the sediment of the Second Songhua River

The Second Songhua River was subjected to a large amount of untreated effluent from petrochemical industries in Jilin City in the 1960s to the 1970s. The objectives of this study were to investigate the mercury and other heavy metal contamination in the sediment of the river. The river bottom sediment was sampled from the river segment between Jilin City to Haerbin City in 2005. Total concentrations of Hg, Cd, Cu, Cr, Pb, Zn, Ni, As, Sc, and major cations （A1, Fe, Mg, Ca, K, Na） in the sediment were measured by atomic fluorescence spectrometer, ICP-MS, and ICP-OES, respectively, following digestion with various acids. We found the concentrations of most elements in the uncontaminated sediment were significantly correlated to those of Sc.     

Form, function and feedbacks in a tidally dominated ooid shoal, Bahamas

Although the general aspects of oolitic depositional systems are well documented, seascape‐scale (≈10³–10⁶ m²) patterns of oolitic shoals and the details of processes acting on them are not well understood or quantified. To begin to fill this basic gap in understanding, this paper describes the morphology and hydrodynamics of Lily Bank, a Modern tidally dominated Bahamian ooid shoal. In this study, integrating remote sensing imagery with quantitative, geo‐located bathymetrical, hydrological and granulometric data in a Geographic Information System documents geomorphic and sedimentological patterns and facilitates interpreting these patterns in the context of the processes operating in this system. The results of these analyses reveal that parabolic bars up to several kilometres in wavelength and several metres in height form a common morphologic motif, although there is considerable variation on that general theme. The seascape‐scale configuration of bars and superimposed sedimentary structures is closely linked to spatial patterns of tidal movements, and includes the presence of mutually evasive flood and ebb channels. Sedimentologically, bars are neither homogenous nor random bodies; instead, granulometric parameters such as sorting and percentage mud vary systematically, as shaped by hydro‐geomorphic controls. The best sorted, coarsest ooids are on bar crests, whereas the finest grains are found in the lower energy, deeper interior and flanking regions. In short, results clearly document hydrodynamic‐bathymetrical influences on these ooid shoals and their granulometry, linkages akin to siliciclastic analogues. Sedimentological, hydrodynamic and geomorphic observations are consistent with a conceptual model for the formation of parabolic bars in which initial irregularities in non‐parabolic bars are enhanced through their effect of focusing flow. Constricted flow leads to higher flow velocities, tidal flow velocity asymmetries, differential net sediment transport and growth of bathymetrical highs. This bathymetrical divergence creates separate paths for flood‐ and ebb‐tides, facilitating emergence of better‐developed parabolic forms. The resultant parabolic geometries and component bedforms appear to be either in dynamic equilibrium with both ebb‐ and flood‐tide flows, or evolving toward that state. In exploring patterns and processes within carbonate shoals, this study illustrates some of the first documented insights on quantitative details of morphology and dynamics and in the links between geomorphic framework and grain‐size and sorting in an oolitic carbonate system. Assuming a continuity of processes between ancient and modern, the insights from this shoal provide information on possible facies geometries and on the characteristics of grains and depositional porosity of analogous facies within ancient ooid shoals.     

Influence of humic acid on bioavailability of heavy metals in sediments

The mimetic ocean environment and chemical method were used to research the bioavailability effect of humic acid on five heavy metals in sediment, including Cd, Cu, Zn, Pb and Ni. The sediment was separated into four containers with artificial seawater, and each of them had different concentrations of humic acid. The values of concentrations covered the whole range found in natural sediment （0.1%-10%）. According to the 48 hours LC50 of clam and distribution coefficient, metals were added in artificial seawater, and their speciation was determined at first and then after two days＇ incubation. It was found the bioavailability of heavy metals was reduced in the presence of humic acid. The obvious negative effect on Zn was observed, but the influence on Cd was not remarkable. In addition, the contents of Pb and Ni increased obviously in organic phase, and they are correlative with the concentrations of humic acid.     

山丘平原过渡区土壤重金属污染特征及评价——以四川省五通桥区为例

采集和分析了五通桥区不同功能区和乡镇73个土壤样品，以了解山丘平原过渡区土壤重金属的含量和污染特征。结果表明，重金属的平均含量为Pb32．18mg／kg、Cd0．82mg／kg、Cu28．61mg／kg、Zn108．08mg／kg、Ni32．66mg／kg、Cr72．44mg／kg；与四川土壤背景值相比，Cu、Ni、Cr的含量与之持平，Pb增加了0．11倍，Zn增加了0．32倍，Cd的积累较为严重，比背景值增加了10倍。污染评价结果显示该过渡区存在一定程度的重金属污染问题，不同功能区的污染程度排序为工业区〉生活区〉农业区。Cd在六种元素的土壤污染分担率中占55．46％，是最主要的污染元素；土壤Cd含量与Pb和Zn存在较高的相关性（相关系数为0．525和0．500），表明存在Pb—Cd和Zn—Cd的复合污染。     

Geotechnical Properties of Low Calcium and High Calcium Fly Ash

In this paper, a comparative study has been made for physical and engineering properties of low calcium and high calcium Indian fly ash. The grain size distribution of fly ash is independent of lime content. Fly ash particles of size >75 μm are mostly irregular in shape whereas finer fractions are spherical for low calcium fly ash. For high calcium fly ash, chemical and mineralogical differences have been observed for different size fractions. Compared to low calcium fly ash, optimum moisture content is low and maximum dry density is high for high calcium fly ash. Optimum moisture content is directly proportional and maximum dry density is inversely proportional to the carbon content. The mode and duration of curing have significant effect on strength and stress–strain behavior of compacted fly ash. The gain in strength with time for high calcium fly ash is very high compared to that of low calcium fly ash due to presence of reactive minerals and glassy phase.