新疆温泉县北达巴特斑岩铜钼矿地质特征及成因初探

北达巴特斑岩铜钼矿产于华力西期流纹斑岩中,矿体呈脉状,铜矿体地表为氧化物,钼矿体主要赋存于深部的流纹斑岩中,其矿化作用呈上铜下钼的双层矿化结构模式,矿化为细脉浸染状。矿床的成因类型为斑岩型铜钼矿。     

我国电气石矿床类型及其地质特征

在研究我国电气石矿产产出地质环境、成矿地质过程和电气石矿物组分特征的基础上,总结了我国电气石矿产成矿类型：花岗伟晶岩型、岩浆热液型、火山次火山热液型、热水沉积型和表生残积砂矿型。并阐述了各类型电气石矿床类型产出的时代、成矿地质特征和电气石矿物化学特征。     

曲流点坝内部剩余油形成与分布规律物理模拟

建立了曲流点坝物理模型,模拟地下曲流点坝储层进行驱替实验。观察注入剂的运动规律,同时,在模型上布置了测量电极,以双电极法测量驱替过程中垂向电阻变化,反映注入剂波及高度的变化规律。分析了侧积泥岩夹层的建筑结构对注入剂在点坝砂体中的流动规律,以及对剩余油的形成分布的影响。通过实验研究证实,在曲流点坝内部,侧积泥岩夹层对注入剂具有强烈的遮挡作用,受其影响形成侧积体差异型剩余油、重力型剩余油以及压力异常型剩余油三种类型剩余油,主要分布在点坝的中上部。在实际生产中,利用水平井钻遇点坝上部进行开采是主要的手段。     

云南省兰坪县凤岩山铅锌铜多金属矿地质特征及成因探讨

凤岩山铅锌铜多金属矿位于兰坪断陷盆地中部,是云南省乃至全国重要的铅锌成矿区之一,具有良好的成矿条件和找矿前景。本文通过对矿区地质背景条件、地质特征、地球化学异常特征、矿体特征、矿石特征的分析的研究,认为矿床成因应为后期热卤水为主改造叠加形成的,属沉积-改造层控型矿床。     

河南省卢氏县张家山铁矿地质特征及成因浅析

通过对张家山铁矿床矿体与围岩的接触关系、蚀变特征、矿石的矿物组合、化学组分等地质特征及成因的分析研究,认为张家山铁矿床应属风化淋滤型铁矿床,其原生矿床为铁多金属硫化物矿床,并厘定了该地区铁矿的找矿标志。     

云南东川因民铜矿金矿化特征及成因初探

因民铜矿发育两种金矿化类型:一是铜矿的伴生金;二是热液构造蚀变岩型。化探样品分析结果显示,金矿化主要赋存于金箔箐断层上、下盘的角砾状蚀变岩内,空间上受岩性和断裂构造的双重控制。邻区拖布卡金矿的成矿地质背景与本区相似,在成矿地质年代上作以类比推测,认为喜马拉雅期是主成矿期。另外通过对光片镜下和化探原生晕样聚类分析研究,发现构造蚀变岩型金矿化具明显的多期多阶段性及热液特征。     

西藏冈底斯矿带成矿作用及远景分析

冈底斯带矿床众多,类型复杂,主要有斑岩型铜（金钼）矿床、矽卡岩型铁铜-铅-锌（银）矿床、层控铅-锌-银矿床、火山岩型金-银矿床及雄村式铜-金矿床。矿床地质特征和同位素年龄表明,冈底斯带南部的矿床与新特提斯洋壳向北俯冲-陆陆碰撞及碰撞期后的构造岩浆事件有关;冈底斯带北部的矿床与班公湖-怒江洋壳向南俯冲-陆陆碰撞及碰撞期后构造岩浆事件有关。冈底斯带与洋壳的俯冲-碰撞有关的岩浆活动强烈,成矿条件优越。西藏高原在碰撞后发生了快速抬升剥蚀,部分矿床顶部出现低温组合矿化,多数矿床保存良好。     

Glacio-lacustrine stratigraphy,aquifer characterization and contaminant transport: a case study in South Lake Tahoe,California, USA

A hydrogeologic model that has been used by many researchers and consultants to describe an area of South Lake Tahoe, California, USA impacted by MTBE contamination describes a relatively homogeneous unconfined aquifer comprised of poorly sorted glacial outwash deposits, within which water-supply wells are able to exert significant alteration in natural groundwater flow. A re-examination of the area’s hydrogeology is presented, which supports a layered heterogeneous aquifer system constructed of alternating fine and coarser-grained glacio-lacustrine depositional units. This re-evaluation was accomplished through a review of lithologic logs across an area of approximately 1 km², combined with observations of significant hydraulic head differences and knowledge of the depositional environments controlled by Pleistocene Lake Tahoe high stands. Many of the fine-grained units observed at depths from 6 to 15 m, although relatively thin, are generally continuous and serve as significant barriers to groundwater flow. The vertical migration of contamination across these fine-grained units to deeper groundwaters was facilitated by cross-screened monitoring wells installed as part of site investigation activities. This conclusion highlights the importance of geologic characterization and proper monitoring well construction at contaminated site investigations.

---

Electronic supplementary material   The online version of this article (doi:) contains supplementary material, which is available to authorized users.

Estimates of heat flow and heat production and a thermal model of the São Francisco craton

An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m², with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m². Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.