Spectrophotometric pH measurement in estuaries using thymol blue and m-cresol purple

The conditional acid dissociation constants (pK_a′) of two sulfonephthalein dyes, thymol blue (TB) and m-cresol purple (mCP), were assessed throughout the estuarine salinity range (0<S<40) using a tris/tris–HCl buffer and spectrophotometric measurement. The salinity dependence of the pK_a′ of both dyes was fitted to the equations (25 °C, total proton pH scale, mol kg soln⁻¹):

The estimated accuracy of pH measurements using these calculated pK_a′ values is considered to be comparable to that possible with careful use of a glass electrode (±0.01 pH unit) but spectrophotometric measurements in an estuary have the significant advantage that it is not necessary to calibrate an electrode at different salinities. pH was measured in an estuary over a tidal cycle with a precision of ±0.0005 pH unit at high (S>30) salinity, and ±0.002 pH unit at low (S<5) salinity. The pH increased rapidly in the lower salinity ranges (0<S<15) but less rapidly at higher salinities.     

氮气、氧气和空气水合物的合成及其拉曼光谱特征

在-20℃和不同的压力下,在实验室内分别合成了氮气水合物(16MPa)、氧气水合物(13MPa)和空气水合物(15MPa),并对其N—N和O—O键伸缩振动的拉曼光谱特征进行了研究。结果表明,人工合成的水合物中的N—N和O—O键的拉曼位移与天然的空气水合物中的数据十分接近。在氮气水合物和空气水合物中,N—N键的拉曼峰值均为2322.4cm-1;O—O键的拉曼峰值在氧气水合物和空气水合物保持一致,均为1547.8cm-1。空气水合物分解的拉曼谱图表明,它不是氮气水合物和氧气水合物组成的混合物,而是由氮分子和氧分子共同生成的单一水合物,氮分子和氧分子同时进入水合物的大笼和小笼中。与空气中的氮、氧比例相比,水合物中氧分子明显富集,氮分子和氧分子的比例为2.4∶1。     

火山沉积岩及其矿床研究中伽马测井曲线解释的误区

根据酸性凝灰岩和酸性火山事件粘土岩的自然伽马测井曲线,对当前流传的"沉积岩层的放射性强度(或放射性核素的含量)随泥质含量的增加而增高"的概念和用自然伽马值及经验公式求泥质含量提出质凝。酸性凝灰岩的自然伽马曲线有高异常响应,若解释为泥岩显然是误解,故将沉积岩伽马曲线高异常一律解释为泥岩是片面的。各类火山事件粘土岩的伽马值相差悬殊,但其泥质含量几乎相等,用它们的伽马值计算泥质含量误差甚大。最后对铝土矿层的伽马曲线稍加解释,指出核测井应用的远景。     

The project “spice”

Proposed to both the French and the European Space Agency as one possible small mission, SPICE is a project for a dedicated small satellite for a near-IR spectroscopic all-sky survey. The instrument would cover the spectral range 1.8 - 3.6µm, possibly extended to 1.8 - 7µm, at a resolution of 100, with pixels of 1 arc-min. The excellent sensitivity (0.02 MJy sr-1) results from: i) the quasi-zero level of background due to the efficient passive cooling of the whole experiment; ii) the use of large format arrays; iii) the non-stop observing mode (drift-scanning). The spectral domain, complementing the one of ISO, partially opaque from the ground, is specially rich in spectral features tracing stars and all components of the Interstellar Medium (molecular, atomic and ionized gas, dust). With a cooling below 80 K of the focal instrument, then it becomes possible to consider doubling the spectral domain and to cover the whole 1.8 - 7µm range.     

ISIS IR: The first infrared fibre-fed spectrograph

ISIS IR is the first attempt to use fibre optics for near infrared spectroscopy (1.8m). It is a field spectrograph (2D spectroscopy), and can work at various resolving powers (up to 25000). It can be transported anywhere, and soon it will be used at CFHT with one NICMOS 3-based camera.Département d'Astrophysique Extragalactique et de Cosmologie     

The development of radio astronomy at Hartebeesthoek

The development of radio astronomy at the Hartebeesthoek Radio Astronomy Observatory in South Africa is described. The Hartebeesthoek site was established originally by NASA as one of three Deep Space Stations equipped with 26-m parabolic reflector antennas. It was first used for radio astronomy by South Africa in terms of the NASA host nation agreement which allowed for its use at times when the facility was not needed for its primary purpose of tracking space probes. After NASA withdrew from South Africa in 1975, the South African Council for Scientific and Industrial Research took over the site and the 26-m parabolic reflector antenna, which NASA had abandoned in position, and established it as a national observatory. The development of the facility to the stage where it could support a variety of observing programmes such as continuum observations and mapping, spectroscopy and pulsar timing is described as well as the role played by the Observatory in global programmes of very long baseline interferometry.     

Comparison between a radiative wind model for be stars and high angular resolution data from the GI2T interferometer

I present theoretical line profiles and intensity maps from an axi-symmetric radiative wind model from a rapidly rotating Be star. The introduction of a viscosity parameter in the latitude-dependent hydrodynamic code enables us to consider the effects of the viscous force in the azimuthal component of momentum equations (Araújo et al. 1994). Both velocity field and density law derived from the hydrodynamic equations have been used for solving the statistical equilibrium equations. By adopting the Sobolev approximation, we could easily obtain a good estimate of both electronic density and hydrogen level populations throughout the envelope. The numerical calculation was performed for parameters characterisic of the Be star Cassiopeiae.     

X-ray spectroscopy of stellar coronae

Summary From the early discovery in 1948 of X-rays from the Solar corona, X-ray spectroscopy has proven to be an invaluable tool in studying hot astrophysical and laboratory plasmas. Because the emission line spectra and continua from optically thin plasmas are fairly well known, high-resolution X-ray spectroscopy has its most obvious application in the measurement of optically thin sources such as the coronae of stars. In particular X-ray observations with theEINSTEIN observatory have demonstrated that soft X-ray emitting coronae are a common feature among stars on the cool side of the Hertzsprung-Russell diagram, with the probable exception of single very cool giant and supergiant stars and A-type dwarfs. Observations with the spectrometers aboardEINSTEIN andEXOSAT have shown that data of even modest spectral resolution (/ = 10–100) permit the identification of coronal material at different temperatures whose existence may relate to a range of possible magnetic loop structures in the hot outer atmospheres of these stars. The higher spectral resolution of the next generation of spectrometers aboard NASA'sAXAF and ESA'sXMM will allow to fully resolve the coronal temperature structure and to enable velocity diagnostics and the determination of coronal densities, from which the loop geometry (i.e. surface filling factors and loop lengths) can be derived. In this paper various diagnostic techniques are reviewed and the spectral results fromEINSTEIN andEXOSAT are discussed. A number of spectral simulations forAXAF andXMM, especially high-resolution iron K-shell, L-shell, and2s-2p spectra in the wavelength regions around 1.9 Å, 10 Å, and 100 Å, respectively, are shown to demonstrate the capabilities for temperature, density, and velocity diagnostics. Finally, iron K-shell spectra are simulated for various types of detectors such as microcalorimeter, Nb-junction, and CCD.     

Bayesian Spatial Modelling of Gamma Ray Count Data

Gamma ray logging is a method routinely employed by geophysicists and environmental engineers in site geology evaluations. Modelling of gamma ray data from individual boreholes assists in the local identification of major lithological changes; modelling these data from a network of boreholes assists with lithological mapping and spatial stratigraphic correlation. In this paper we employ Bayesian spatial partition models to analyse gamma ray data spatially. In particular, a spatial partition is defined via a Voronoi tessellation and the mean intensity is assumed constant in each cell of the partition. The number of vertices generating the tessellation as well as the locations of vertices are assumed unknown, and uncertainty about these quantities is described via a hierarchical prior distribution. We describe the advantages of the spatial partition modelling approach in the context of smoothing gamma ray count data and describe an implementation that may be extended to the fitting of a more general model than a constant mean within each cell of the partition. As an illustration of the methodology we consider a data set collected from a network of eight boreholes, which is part of a geophysical study to assist in mapping the lithology of a site. Gamma ray logs are linked with geological information from cores and the spatial analysis of log data assists with predicting the lithology at unsampled locations.     

The effect of thermal treatment on the 57Fe Mössbauer spectrum of beryl

Mössbauer spectra (MS) of blue, green and yellow beryl (ideally Be₃Al₂Si₆O₁₈) containing approximately 1% of iron were obtained at 295 and 500 K. Room temperature (RT) spectra of both blue and green samples showed the presence of an asymmetric Fe²⁺ doublet (ΔE _Q~2.7 mm/s, δ~1.1 mm/s), with a very broad low-velocity peak. There is no clear evidence for the presence of a ferric component. The MS of the yellow sample at RT consists of an intense central absorption with parameters typical for Fe³⁺ (ΔE _Q~0.4 mm/s, δ~0.29 mm/s), plus an apparently symmetrical Fe²⁺ doublet. This sample acquires a light-blue shade upon heating in air at about 620 K. Thermal treatments at high temperatures caused no significant changes in the MS, but the green and yellow beryl acquire a blue colour. All these results are interpreted in relation to the existence of channel water and the distribution of iron among the available crystallographic sites.