断裂静止期有无输导油气能力的判别方法

通过断裂内部结构及输导通道特征研究,得到断裂静止期输导油气通道主要是碎裂岩的连通孔隙,其是否具有输导油气能力主要取决于碎裂岩颗粒粒度、泥质含量和断裂倾角大小。在此基础上,利用物理模拟实验模拟了油气在浮力作用下沿断裂碎裂岩运移速度与碎裂岩颗粒粒度、泥质含量和断裂倾角之间的关系。利用此关系建立了一套断裂静止期有无输导油气能力的判别方法,即运移速度大于零,断裂具输导油气能力,反之则无。并将其应用于海拉尔盆地苏仁诺尔断裂静止期在各组地层中有无输导油气能力的判别中,其结果与地下油气分布情况相符,表明该方法定量判别断裂静止期有无输导油气能力是可行的。     

深汕特别合作区协同共治型区域治理模式研究

伴随金融风暴引发了全球资本重组,资本的空间修复客观要求以新的跨界区域治理模式组织资本与劳动力关系,而中国传统跨界产业园区建设路径依赖于区域发展中“省-地方”分层设权治理模式。以珠三角地区的深汕特别合作区为例,通过深度访谈与文本分析法,发现深汕特别合作区形成的多主体共同参与、分工合作的协同共治型区域治理模式是在传统路径依赖基础上的一次制度创新。通过分析模式产生的产业经济背景、政策制度背景与现实发展概况,并解构深汕特别合作区行政组织架构、空间发展政策及利益分配机制,发现省政府的放松管制与资源注入,地方政府的优势互补、分工协同是协同共治型区域治理模式的本质特征,而这一区域治理模式的产生将会对中国区域产业政策与空间政策及政府职能转型提供新的经验与启示。     

基于鲁棒自适应策略的燃气轮机系统控制器设计

太阳能、风能和潮汐能等可再生能源的发电系统,具有间歇性发电的特性.因此,具有快速响应、发电效率高的燃气轮机发电系统,能够在可再生能源发电间歇出现时充当替代系统,不仅稳固电网的负荷能力,还有助于推动可再生能源的发展.由于燃气轮机是一个模型包含未知的复杂非线性系统,目前针对转速环节主要采取传统PID控制技术.然而,实际运行中系统工况发生变化时,控制器参数不能随着这些变化做出相应的调整,使得控制效果欠佳,执行器故障的出现也可能导致系统无法正常工作.因而,本文针对单轴燃气轮机的孤岛发电模式,结合燃气轮机系统特性,基于反步法的设计思路,引入不依赖于系统模型的鲁棒自适应控制策略,并加入容错控制和Nussbaum函数构造转速控制器.在控制器设计过程中融合动态面方法,解决高阶系统中反步法引起的计算爆炸问题.最后,通过仿真,验证了控制器的可靠性.     

CINRAD/SA(B)发射机触发器芯片级故障诊断流程

发射机触发放大器主要为调制器中SCR开关管提供放电触发脉冲,同时兼具调制组件的保护功能。发射机触发器芯片级故障诊断流程将触发器故障定位到芯片级,大大降低了触发器故障维修成本,同时为雷达测试平台中触发器故障自动诊断建模提供了技术支持。在发射机触发器信号流程基础上,依据发射机触发器关键点波形或关键点电平,通过触发器故障树图了解故障因果关系,研究出规范化的触发器芯片级故障诊断流程。列举了依据触发器芯片级故障诊断流程,修复了由于单稳态触发器无触发信号输出,导致无-200V放电触发信号的单稳态触发器故障个例。结果表明:芯片级触发器故障诊断流程可以快速定位发射机触发器故障点到最小可更换芯片。具有操作方法简洁、诊断思路清晰、操作规范,基层雷达站技术人员容易掌握的特点,可有效提高新一代天气雷达技术保障水平,保证雷达观测数据的可靠性。     

CINRAD/SA(B)发射机激励放大器芯片级故障诊断流程

激励放大器是发射机射频放大链电路前级功率放大器,对雷达探测资料可靠性具有重要作用。研究芯片级故障诊断流程,一方面可以解决台站技术保障人员无法故障定位到芯片级的技术难题;另一方面,芯片级故障维修可达到大大降低维修成本的目的。雷达故障一般分为参数调整不当导致性能下降故障和器件损坏造成参数异常故障。为此,通过总结出CINRAD/SA(B)发射机激励放大器信号流程、故障树图集,在依据同步信号时序关系及关键点波形参数基础上,研究出规范化的激励放大器调试技术和方法,以及激励放大器芯片级故障诊断定位流程,并列举了依据激励放大器芯片级故障诊断定位流程,修复激励放大器集成块N8损坏,导致+8 V电源不正常,造成激励放大器无功率输出,以及激励放大器的第二级功放模块故障导致激励放大器输出功率低的两个故障的典型个例,以检验维修效果。实际应用结果表明:芯片级激励放大器故障诊断定位流程可以快速定位发射机激励放大器故障点到故障器件,方法简洁、思路清晰、操作规范,基层雷达站技术人员容易掌握;激励放大器调试技术和方法,能解决激励放大器参数调整不当导致激励放大器性能下降故障,可有效提高新一代天气雷达技术保障水平。     

Probing fault zone heterogeneity on the Nojima fault: Constraints from zircon fission-track analysis of borehole samples

Fission-track (FT) thermochronologic analysis was performed on zircon separates from rocks in and around the Nojima fault, which was activated during the 1995 Kobe earthquake. Samples were collected from the University Group 500 m (UG-500) borehole and nearby outcrops. FT lengths in zircons from localities > 25 m away from the fault plane as well as one 0.1 m away from the fault in the footwall are characterized by concordant mean values of  10–11 μm and unimodal distributions with negative skewness, which showed no signs of appreciable reduction in FT length. In contrast, those adjacent (< 3 m) to the fault at depths on the hanging wall side showed significantly reduced mean track lengths of  6–8 μm and distributions having a peak around 6–7 μm with rather positive skewness. The former pattern is interpreted to reflect cooling through the zircon partial annealing zone (ZPAZ), without later, partial thermal overprints. The latter indicates substantial track shortening due probably to secondary heating by a thermal event(s) that locally perturbed the geothermal structure. Modeled zircon FT length and age data of partially annealed samples from the UG-500 borehole revealed a cooling episode in the ZPAZ that started at  4 Ma within  3 m from the fault plane, whereas those from the Geological Survey of Japan 750 m borehole record cooling started at  31–38 Ma within  25 m from the fault. On the basis of one-dimensional heat conduction modeling as well as the consistency between the degree of FT annealing and the degree of deformation/alteration of borehole rocks, these cooling ages in both boreholes are interpreted as consequences of ancient thermal overprints by heat transfer or dispersion via fluids in the fault zone. Together with the zircon FT data of a pseudotachylyte layer recently analyzed, it is suggested that the present Nojima fault system was reactivated in the Middle Quaternary from an ancient fault initiated at  56 Ma at mid-crustal depths. Also shown is a temporal/spatial variation in terms of the thermal anomalies recorded in the fault rocks, implying heterogeneity of hot fluid flows in the fault zone.     

Caledonian high-pressure metamorphism in the Strona-Ceneri Zone (Southern Alps of southern Switzerland and northern Italy)

The Strona-Ceneri Zone comprises a succession of polymetamorphic, pre-Alpidic basement rocks including ortho- and paragneisses, metasedimentary schists, amphibolites, and eclogites. The rock pile represents a Late Proterozoic or Palaeozoic subduction accretion complex that was intruded by Ordovician granitoids. Eclogites, which occur as lenses within the ortho-paragneiss succession and as xenoliths within the granitoids record a subduction related high-pressure event (D1) with peak metamorphic conditions of 710 ± 30 °C at 21.0 ± 2.5 kbar. After isothermal uplift, the eclogites experienced a Barrowtype (D2) tectonometamorphic overprint under amphibolite facies conditions (570-630 °C, 7-9 kbar). U-Pb dating on zircon of the eclogites gives a metamorphic age of 457 ± 5 Ma, and syn-eclogite facies rutile gives a ²⁰⁶Pb/²³⁸U age of 443 ± 19 Ma classifying the subduction as a Caledonian event. These data show that the main tectonometamorphic evolution of the Strona-Ceneri Zone most probably took place in a convergent margin scenario, in which accretion, eclogitization of MOR-basalt, polyphase (D1 and D2) deformation, anatexis and magmatism all occurred during the Ordovician. Caledonian high-pressure metamorphism, subsequent magmatism and Barrow-type metamorphism are believed to be related to subduction and collision within the northern margin of Gondwana. Editorial handling: Edwin Gnos     

胶东栖霞大霞址断裂南段金矿地质特征及成因研究

近年来胶东栖霞大霞址断裂南段发现了多个金矿床。文章从蚀变带特征、矿体空间展布特征等方面阐述了研究区金矿地质特征;从地层、岩浆岩、构造“三位一体”分析总结了控矿因素;通过与典型矿床的分析对比,认为该区金矿床类型属于构造蚀变岩型,金矿与硅化、绢英岩化、黄铁矿化关系最为密切;结合对成矿物质来源、成矿流体运移、沉淀、富集等的认识,对大霞址断裂金矿的成因进行了总结,建立了成矿模式,提出了下一步找矿建议。     

Determination of the fault plane using a single near-field seismic station with a finite-dimension source model

We explore the possibility of determining the actual fault plane of an earthquake from the inversion of near-source displacement seismograms of one station when a finite-dimension source is used instead of a point source model and when the complete displacement is taken into account, including near-field waves. Tests on synthetic seismograms and real data recorded at local distances show that this is possible even with a single, three-component station. A single accelerogram available for the Erzincan, Turkey, 1992 March 13, M _s = 6.8 earthquake is inverted and the solution found is compatible with other seismological studies and with the mechanism expected for the North Anatolian Fault.     

同生断层及其伴生褶曲的组合式样

石油钻探遇断层而失败的情形时有发生,其中多数是由于对同生断层及其伴生褶曲认识的错误所引起。为减少勘探失误,本文讨论了同生断层及其伴生褶曲空间组合的一些规律。（1）同生断层可分为盆地边界同生断层和内部同生断层两大类。边界同生断层的断面产状基本形态有勺形、椅形、阶形和坎形四种。（2）边界同生断层是追踪盆前的一组或两组基底断裂发育而成的。单向追踪的边界同生断层平面伸展较平直;双向追踪的边界同生断层平面伸展呈锯齿形。（3）内部同生断层及其伴生褶曲在剖面上的组合式样有正牵引和同向y字形派生断层、逆牵引和反向y字形派生断层。这两类四种形变可单一出现,也可在同一剖面中共存。（4）内部同生断层系的平面组合基本式样有帚状和雁列两种。构成地堑式的两条同生断层断距都较大时就会有挤压背斜出现（构成w形构造）。（5）中国东部裂谷系盆地中的所谓“滚动背斜”都不具备标准的“滚动”特征;它只产生在特定的层位上;对它与其称“滚动背斜”,不如称“逆牵引背斜”为宜。