大别山及苏鲁地区微粒金刚石分类及其大地构造意义

1992年发现大别山首例微粒金刚石之后，又于2003年和2004年在大别山和苏鲁地区的榴辉岩薄片中和榴辉岩的人工重砂中发现了微粒金刚石。本文报道其中尚未发表的7颗，并对2颗较大的薄片中的微粒金刚石和2颗自由晶体金刚石进行拉曼光谱和红外光谱测试。研究结果表明，本区所有微粒金刚石都为IaA和IaB型金刚石的混合体。缺少Ib型金刚石，表明没有人造金刚石的混入。薄片中的金刚石大部分为石榴子石的包裹体，少数产出于颗粒之间，直径为30-180μm。自由颗粒微粒金刚石直径为400-700μm。在大别山北部，不但又一次找到了微粒金刚石，还在石榴子石中发现有单斜辉石、磷灰石和金红石的出溶。这表明北大剐不但是超高压地质体，而且可能是本区俯冲最深的地质体。     

ODP 1144站钻孔沉积物中微玻璃陨石的元素地球化学特征

利用电子探针和激光探针等离子体质谱方法分析了取自南海北部的ODP1144钻孔沉积物中的微玻璃陨石和取自邻近的广东省湛江和吴川玻璃陨石的主元素和微量元素组成。结果显示，这些微玻璃陨石属于亚洲-澳大利亚散落区的普通微玻璃陨石。从成分上看，这些微玻璃陨石存在两种不同的类型，其中的绝大部分Al2O3含量在19.0%以上，属于高Al类型，相应的难熔微量元素含量也比较高；个别微玻璃陨石Al2O3含量（13.0%)和难熔微量元素含量较低，微量元素含量和特征比值都与邻近的广东省湛江和吴川的玻璃陨石相近。元素地球化学特征意味着，这些微玻璃陨石来源于同一靶源区，但靶区的物质组成并不均一。     

Isothermal annealing of partially metamict zircon: evidence for a three-stage recovery process

 Raman spectroscopy and the powder diffraction technique have been used to monitor the recovery process of two partially metamict zircons (2.6 and 4.8 × 10¹⁸ α-decays g⁻¹) from Sri Lanka during a series of isothermal annealing experiments in the temperature range from 870 to 1622 K. These experiments show for the first time that structural recovery in partially metamict zircon proceeds via three distinct recovery stages, each of which occurs within a distinct time-temperature regime. Whereas the first two stages have previously been recognized (recovery of damaged crystalline remnants and epitaxial recrystallization), the third stage has not yet been identified as a single activated process. It is suggested that anisotropic defect annealing during the first stage at low temperatures, where the structure recovers preferentially along the a(b) plane, produces a geometrical situation where large structural rearrangements are necessary to remove the remaining defects inside the crystalline material. This situation is approximately reached when the amorphous domains start to recrystallize. The reason for anisotropic annealing can be found in a different connectivity between polyhedral linkages in both directions of the zircon lattice. High apparent activation energies, in the range of 6.4 to 7.9 eV, were determined for the third recovery stage from the Raman data, which are interpreted to reflect large structural rearrangements (i.e. polyhedral tilting) associated with the final recovery of the c axis. This explains the occurrence of a distinct recrystallization stage without defect annealing. Finally, it should be mentioned that the first recovery stage is not necessarily expected to occur in less damaged zircon crystals (<∼2 × 10¹⁸ α-decays g⁻¹), since less stable defects along the basal plane might have already been self-annealed during radiation damage accumulation under ambient temperatures. Received: 6 September 2001 / Accepted: 25 February 2002     

Al hematites prepared by homogeneous precipitation of oxinates: material characterization and determination of the Morin transition

A novel method for synthesis of aluminium hematites, based upon the homogeneous precipitation of Fe and Al oxinates in various proportions, is presented. The precursor precipitates are heated in air at 700?°C. X-ray diffraction, thermal analyses, BET, FTIR, optical reflection analysis, TEM and Mössbauer spectroscopy at room temperature and 80?K of the resulting products indicate that single-phase hematites are formed with structural Al substitution of up to 10 at%. Interestingly, the particle size (>100?nm) is not substantially reduced by the Al content. Although it remains difficult to obtain a homogeneously distributed Al substitution in the final hematite, this processing line offers a unique opportunity to separate the effects of grain size and Al substitution on the Morin transition temperature (T _M) of Al hematite. From the comparison between the present hematites and a series of Al-substituted hematites with lepidocrocite as precursor, it could be shown that the effect on T _M, associated with a change of a factor 10 in grain size, is about 1/3 of the effect caused by a change of 10 in the degree of substitution. Finally, it is suggested that proper thermal treatments under different conditions of the same precursors are likely to produce spinel phases.     

Spectroscopic evidence for pressure-induced phase transitions in diopside

 Raman spectra of diopside were collected from atmospheric pressure to 71 GPa. The pressure dependences of 22 modes were determined. Changes occurred in the spectra at three different pressures. First, at approximately 10 GPa, the two Raman modes at 356 and 875 cm⁻¹ disappeared, while the mode at 324 cm⁻¹ split into two modes, diverging at this pressure with significantly different pressure shifts; second, at approximately 15 GPa, a small (1 to 2 cm⁻¹) drop in several of the frequencies was observed accompanied by changes in the pressure dependency of some of the modes; and third, above 55 GPa, the modes characteristic of chains of tetrahedrally coordinated silicon disappeared, while those for octahedrally coordinated silicon appeared. The first change at 10 GPa appears to be a C2/c to C2/c transition involving a change in the Ca coordination. The third change above 55 GPa appears to be a change in the silicon coordination. At 15 GPa, it is suggested that a change in compressional mechanism takes place. Received: 14 November 2000 / Accepted: 9 January 2002     

Premelting and calcium mobility in gehlenite (Ca2Al2SiO7) and pseudowollastonite (CaSiO3)

 Premelting effects in gehlenite (Ca₂Al₂SiO₇) have been studied by Raman spectroscopy and calorimetry, and in gehlenite and pseudowollastonite (CaSiO₃) by electrical conductivity. The enthalpy of premelting of gehlenite is 17.3 kJ mol⁻¹ and represents 9% of the reported enthalpy of fusion, which is in the range of the reported fraction of other minerals. The Raman and electrical conductivity experiments at high temperatures, for gehlenite and pseudowollastonite, show that the premelting effects of both compositions are associated with enhanced dynamics of calcium atoms near the melting point. This conclusion agrees with the results obtained for other minerals like diopside, but contrasts with those found for sodium metasilicate in which the weaker bonding of sodium allows the silicate framework to distort near the melting temperature and deform in such a way to prefigure the silicate entities present in the melt. Received: 30 April 2002 / Accepted: 7 August 2002 Acknowledgements We thank Y. Linard for help with DSC measurements and two anonymous reviewers for their constructive comments. This work has been partly supported by the EU Marie-Curie fellowship contract no. HPMF-CT-1999-00329, the CNRS-Carnegie Institution of Washington program PICS no.192, and the NSF grants EAR-9614432 and EAR-9901886 to B.O.M.     

A quantitative investigation into the temporal and spatial variations in the emergence of adult blackflies (Diptera: Simuliidae) from the Breitenbach, a small upland stream in Germany

As a contribution to the long-term emergence studies carried out as part of the “Breitenbach ecosystem project”, this paper presents the results obtained on emergence patterns and population dynamics of blackflies from 1984 to 1988. The Breitenbach is a small first order stream near Schlitz/Hesse, running into the Fulda river. Adult blackflies were caught in 4 greenhouse emergence traps, each spanning the whole width of the stream for a length of 6 m. A manual and then a partly automated method for collecting trapped insects was applied for three years and one year, respectively. Sixteen blackfly-species of different origin were found in the traps: a) autochthonous species: Prosimulium tomosvaryi, Simulium vernum s.l., S. cryophilum s.l., S. ornatum s.l. (common); S. costatum, S. trifasciatum, S. monticola, S. argyreatum (rare); b) species of doubtful origin: S. lundstromi, S. angustitarse, S. angustipes, S. aureum (very rare); c) allochthonous species: S. lineatum, S. equinum, S. erythrocephalum, S. noelleri. It was shown that the last 4 species had not emerged from the Breitenbach but had flown into the traps as adults. In addition, females of autochthonous species with blood or with mature eggs were trapped, which were also considered to have flown in. Besides revealing a limitation of the trap construction, they supported the detailed interpretation of some intricated patterns of appearance. Variations in emergence patterns and specimen numbers between years and traps were pronounced, but only in a few cases could they be attributed to changes in abiotic factors such as water temperature or discharge. P. tomosvaryi had the most simple and regular life cycle, with one well synchronised emergence peak annually from April to May (or even to June). No gradient of specimen numbers along the stream was evident. The two closely related species S. vernum and S. cryophilum had quite similar emergence patterns: There were two broad peaks per year, extending mainly from March to June and from July to October or November. In some cases the number and separation of consecutive generations was not clear. The abundance of both species clearly decreased downstream, more so for S. cryophilum than for S. vernum. In a trap closest to a tributary spring, S. cryophilum was the dominant species during three of the four years examined. The adults of S. ornatum displayed an intricate pattern of appearance, with very low specimen numbers in spring and medium to very high numbers in July/August and September/October. S. ornatum is the only blackfly species that inhabits both the Breitenbach and the adjacent section of the Fulda river. It was shown that females emerging from the Fulda river regularly invade the Breitenbach valley in greatly varying numbers and oviposit there. This leads to overlapping larval cohorts with corresponding emergence peaks. Although S. ornatum was the most abundant species in one year in the lower traps (60 to 80% of all individuals), it remains uncertain whether it is a long-term, permanent member of the autochthonous blackfly fauna of the Breitenbach. Estimates of total numbers of flown-in adults, actual emergence, dry weight biomass, the ecological separation of the species and their life cycle strategies are discussed.     

Preliminary Results from a New 157 nm Laser Ablation ICP-MS Instrument: New Opportunities in the Analysis of Solid Samples

Preliminary results are given from an excimer 157 nm laser ablation multiple-collector inductively coupled plasma-mass spectrometer (LA-MC-ICP-MS), used for the isotopic measurements of solid materials. Elements of geological interest with different volatilities such as Pb and U (e.g. zircon geochronology) and Cu and Zn (as examples of geochemical/biochemical tracers) were analysed. The range of ablation rates of 20-150 nm s^-1 enabled us to ablate the sample down to a depth of 45 μm for a 50 μm diameter pit. The Cu and Zn isotopic measurements gave values that were very stable with, on average, a 0.01 % standard error, comparable with that achieved in liquid mode measurements.     

Column Amounts of ClONO2, HCl, HNO3, and HF from Ground-Based FTIR Measurements Made Near Kiruna, Sweden, in Late Winter 1994

During SESAME phase I ground-based FTIR measurements were performed atEsrange near Kiruna, Sweden, from 28 January to 26 March 1994. Zenith columnamounts of ClONO₂, HCl, HF, HNO₃,O₃, N₂O, CH₄, and CFC-12 werederived from solar absorption spectra. Time series of ClONO₂and HCl indicate a chlorine activation at the end of January and around 1March. On 1 March a very low amount of HCl of 2.09times; 10¹⁵molec. cm^-2 was detected, probably caused by a second chlorineactivation phase starting from an already decreased amount of HCl. The ratioof column amounts of HCl to ClONO₂ decreased inside the vortexfrom about 1 in January to 0.4 in late March compared to values of about 2outside the vortex. Although the Arctic stratosphere was rather warm in winter1993/94 and PSCs occurred seldom, chlorine partitioning into its reservoirspecies HCl and ClONO₂ changed during that winter andClONO₂ is the major chlorine reservoir at the end of thewinter as in cold winters like 1991/92 and 1994/95.     

ICAP仪器主要工作条件的优化方法研究

ＩＣＡＰ仪器在不同工作条件下，其测试精度与准确值差别是较大的。因此，正确进行工作条件的优化，是ＩＣＡＰ仪器分析工作的关键。本文从理论依据及实验方法两个方面探讨了实现条件优化的具体方法，以及其对于确保仪器的最佳测试状态和进一步扩大测试领域所具有的实际意义。