Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

东营凹陷北部沙河街组四段深部储层多重成岩环境及演化模式

主要通过薄片鉴定、扫描电镜观察、包裹体分析、粘土矿物分析、镜质体反射率测试和岩心物性分析等手段,结合构造发育史和有机质热演化史等研究成果,以揭示东营凹陷北带古近系深部碎屑岩储层成岩环境及演化模式为目的展开研究工作。结果表明:东营凹陷北带古近系深部碎屑岩储层存在酸性、碱性和酸性碱性交替等多重成岩环境。酸性成岩环境以碳酸盐矿物溶解、长石溶解蚀变为高岭石并伴生石英次生加大等为标志,碱性成岩环境以石英质颗粒及其次生加大边溶解、长石次生加大和晚期碳酸盐矿物沉淀为标志。研究区古近系深部碎屑岩储层成岩环境由浅至深大致经历了碱性—酸性—酸性碱性交替(局部碱性较强)—碱性—弱碱性的演化过程,并建立了沙河街组四段的成岩演化和储层改造模式。     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

流域水文模型参数识别的现代优化方法研究进展

水文参数优化是水文模型发展中的一个重要部分,针对水循环过程模拟中的流域水文模型参数识别的复杂优化问题,回顾了水文模型优化算法的发展历程,对国内外水文模型参数识别算法的最新进展进行了阐述.介绍了模拟退火算法、遗传算法、SCE-UA、粒子群算法等常用算法的参数设定及一般流程,并对编码遗传算法、单纯形混合加速遗传算法和运用融合技术的几种遗传算法以及其它几种常用算法在新安江模型中的优化结果进行了比较,认为混合加速遗传算法是一种较好的方法.在系统研究现代优化算法与传统优化算法的基础上,建立各种优化算法的融合技术和法则可能是进一步提高参数优化算法性能的方向.     

滑坡体三维地质建模与可视化分析

针对滑坡地质研究的自身特点,提出了面向滑坡地质体三维建模的NURBS-BRep混合数据结构和地质结构单元实体构造技术.通过对滑坡基础地质数据的预处理、滑坡数字地形和滑动面的三维建模、地质结构面的系统构造、地质结构体的生成和显示,形成了一套完整的滑坡三维地质模型的构建方法.将该方法应用于某水库滑坡,建立了相应的三维滑坡地质模型,并基于此模型进行了三维剖切分析、数字钻孔、等值线生成、滑块自动剖分、滑坡失稳可视化动态模拟和滑坡体方量精确计算等一系列实用的可视化分析,为滑坡稳定性的准确计算和客观评价提供了有力的支持.     

舟山国家石油储备基地堆载预压加固效果分析

介绍了舟山国家石油储备基地试验区软基堆载预压大型现场试验结果,根据现场试验测得的数据,分析了软土地基堆载预压下沉降变化规律、分层沉降变化规律、深层土体位移变化规律、超静孔隙水压力变化规律,进一步探讨了根据应力和应变分析得到的地基固结性状,其中通过应变分析得到适用于储备基地的沉降经验系数m。结果表明,打设塑料排水板结合堆载预压处理软弱地基具有良好的效果。     

高桩码头桩基负摩擦力现场试验研究 ——上海洋山深水港工程现场试验

高桩码头接岸结构中的桩基础,在抛石的作用下将产生负摩擦力。通过支撑桩及自由桩上负摩擦力的现场试验研究,获得抛石过程中基桩内力随深度变化的基本规律。抛石过程中基桩上的负摩擦力主要产生在抛石段。同时,抛石作为附加荷载,将引起下方软弱土层的固结沉降,桩土之间产生相对位移,从而在抛石段下方一定范围内也产生负摩擦力作用。承台荷载对负摩擦力的大小和分布有着重要的影响。提出的负摩擦力分布规律和采用有效应力法计算层状土负摩擦力的公式,可为桩基础的设计,尤其对水下单面抛石施工的设计及采取消减负摩擦力的措施提供依据。     

饱和软黏土动力学特性循环扭剪试验研究

以饱和软黏土的循环扭剪试验研究为基础,阐明不固结不排水条件下饱和软黏土的动力学特性。在循环扭剪和循环三轴两种不同试验应力状态下,通过研究不同围压和不同静、动应力组合下饱和软黏土的应力等效破坏关系和应变等效破坏关系,提出在循环荷载作用下饱和软黏土的循环破坏同样遵循Mises屈服准则,且在Mises屈服准则下,饱和软黏土的循环强度趋于不变量。循环破坏的过程可以等效为一种拟静力弹塑性循环蠕变,建立了饱和软黏土循环累积变形随静荷载、循环荷载以及循环破坏振次之间的关系式。上述结论分别从应力和变形两个方面阐述饱和软黏土的动力学特性,与试验应力状态和围压无关,可以推广到一般应力状态下。     

强降雨条件下土质边坡瞬态稳定性分析

基于实际降雨气象资料,设计了单峰降雨和8个不同时间间隔的双峰降雨计算方案,利用非饱和土力学理论,对边坡的瞬态稳定性进行了计算和分析,研究了水分在坡体内的运移对边坡稳定性的时间空间影响效应,同时考察了降雨入渗造成的土性渗透特性的改变。分析发现：一次降雨的影响历时约12 d,降雨后约0.5 d该类土质边坡最危险;不同时间间隔的两次降雨对边坡稳定的影响比单峰降雨的最小安全系数滞后约0.3 d～0.8 d,影响历时基本保持不变;土体物理力学性质、边坡最危险滑动面及其对应的安全系数随水分在坡体内渗透运移而变化。