低渗透油藏菱形反九点井网不等缝长优化研究

在低渗透油藏开发中广泛使用菱形反九点井网,但针对不同位置生产井及注水井的裂缝缝长配比关系还缺少广泛深入的研究。基于长庆油田某低渗透油藏参数,建立了数值模拟模型,在菱形反九点井网中分别设置不同的边井、角井和注水井裂缝穿透比,研究不同裂缝配置模式对水驱开发效果的影响。流线模拟及数值模拟计算结果表明,在注水开发中,注水井缝长是影响油田产液量及水驱效果的关键因素;边井裂缝较角井裂缝更易见水,对油田综合含水影响较大,在菱形反九点井网中需要进行不等缝长优化设计;边井裂缝缝长对水驱效果的影响分为早、中、晚期(Ⅰ、Ⅱ、Ⅲ)曲线段,随着注水井裂缝穿透比增加,早期(Ⅰ)曲线段增长,中期(Ⅱ)曲线段缩短,而晚期(Ⅲ)曲线段变化较小;随着角井裂缝穿透比增加,采出程度逐渐增大,当角井裂缝穿透比较大时,存在“反转”现象;随着注水井裂缝穿透比增加,角井裂缝优化穿透比减小,而边井裂缝优化穿透比增加。该研究成果对于指导低渗透油藏菱形反九点井网裂缝优化设计,提高波及系数和开发效果具有重要的指导意义。     

Comparison of surface and borehole locations of induced seismicity

Monitoring of induced microseismic events has become an important tool in hydraulic fracture diagnostics and understanding fractured reservoirs in general. We compare microseismic event and their uncertainties using data sets obtained with surface and downhole arrays of receivers. We first model the uncertainties to understand the effect of different acquisition geometries on location accuracy. For a vertical array of receivers in a single monitoring borehole, we find that the largest part of the final location uncertainty is related to estimation of the backazimuth. This is followed by uncertainty in the vertical position and radial distance from the receivers. For surface monitoring, the largest uncertainty lies in the vertical position due to the use of only a single phase (usually P‐wave) in the estimation of the event location. In surface monitoring results, lateral positions are estimated robustly and are not sensitive to the velocity model. In this case study, we compare event location solutions from two catalogues of microseismic events; one from a downhole array and the second from a surface array of 1C geophone. Our results show that origin time can be reliably used to find matching events between the downhole and surface catalogues. The locations of the corresponding events display a systematic shift consistent with a poorly calibrated velocity model for downhole dataset. For this case study, locations derived from surface monitoring have less scatter in both vertical and horizontal directions.     

单孔岩样水压致裂的数值分析

水压致裂是改变岩体结构的一种天然行为和人为手段。采用F－RFPA2D软件,对水压致裂过程、裂缝扩展形态及注水孔形状和大小、应力条件和岩样强度等影响因素进行了研究。将开始出现声发射的水压称为微裂压力,将声发射急剧增多、裂缝非稳定扩展直至岩样破坏的水压称为破裂压力。岩样尺寸一定时,微裂压力和破裂压力随内孔面积增加而降低,方形孔岩样的微裂压力和破裂压力均小于同面积的圆形孔。微裂压力和破裂压力随围压或岩样强度增加而增加,且其差值随岩样强度增加而增加,理论破裂压力与模拟值趋势基本一致。方形孔的宏观裂纹起裂位置多在角点附近,而圆形孔比较随机。无围压时,宏观裂纹的延伸方向随机;有围压时,宏观裂纹扩展方向大致与主应力方向一致,且沿较大主应力方向的宏观裂纹扩展至岩样破坏,较小主应力方向宏观裂纹不完全发育。研究结果对水压致裂试验和工程实践有一定参考意义。     

地应力影响煤层气勘探开发的研究现状与展望

通过总结评述前人关于地应力影响煤层气勘探开发的相关文献和成果,讨论了地应力与煤层气成藏、地应力与煤储层渗透率、地应力与煤储层压裂改造、地应力与煤层气井位部署的关系,对相关研究工作的未来走势进行了展望。认为：地应力控制着煤层气成藏过程中的各个环节,是影响煤层渗透率中最主要的因素,也是煤层气井压裂设计和井网部署必须考虑的重要参数。地应力研究对煤层气勘探开发意义重大,且亟待加强。     

基岩水井水力分段压裂增水技术研究与应用

随着我国社会、经济的快速发展和人民生活水平的不断提高,水资源供需矛盾日益突出。特别近几年,我国西南、西北、华北等许多地区发生持续干旱,当地的人畜用水极度困难。抗旱找水打井工作十分迫切。针对我国基岩水井取水存在部分水井出水量偏低的状况,从基于水井压裂机理、压裂液、压裂工艺等方面开展了分段压裂增水技术研究工作,并进行了试验。成功探索出一套适合我国国情的水文水井用水力压裂技术,为我国合理开发和利用地下水资源,缓解基岩山区水资源紧张提供了技术支撑。     

富县探区页岩气勘探开发的几点认识

鄂尔多斯盆地中南部“定边-华池-富县”L形页岩气有利发育区,发育大套黑色页岩,有机质含量高、成熟度适中、构造破坏小。特别是富县探区除具有良好的生油条件外,还具有页岩气成藏条件,但其储集层物性差,孔隙度和渗透率极低,自然产能较低,开采难度大,页岩气的经济开采还处于探索起步阶段。针对目前中石化华北分公司在富县区块的工艺试验,在分析国外页岩气开发技术现状的基础上,提出了富县探区页岩气勘探开发的认识和建议。     

页岩气地震识别与预测技术

依据页岩气的地质特点及当前地震勘查技术的水平,指出地震在识别和追踪页岩储层空间分布（包括埋深、厚度以及构造形态）方面具有明显的优势;综合利用测井及地质资料,对页岩储层有机质丰度、含气性等参数进行解释及优选敏感的地球物理参数,进而建立储层特征与地震响应的关系,以此反演预测页岩气储层有利区;运用相干与曲率等属性分析技术、宽方位甚至全方位地震各向异性分析技术、叠前反演技术、横波分裂技术等,可解决储层裂缝和岩石力学特征问题,直接为钻井和压裂工程技术服务;与压裂技术配套发展的微地震监测技术,可实时提供压裂过程中产生的裂缝位置、方位、大小以及复杂程度,并对储层改造方案的有效性作出准确评价。     

缝洞型油藏超大规模酸压技术

塔河油田缝洞型油藏主要的储集体空间类型为溶蚀的裂缝及大型的溶洞,连通关系极其复杂,70％的钻井需要酸压才能投产.为进一步沟通远井地带的缝洞储集体,室内模拟及现场监测结果表明,超大规模酸压技术能够提高造缝长度,沟通井眼远处的储集体.通过多口井的研究及现场试验,在油气富集带上具有明显的地震反射异常,生产过程中供液不足的井进...     

“Basin scale” versus “localized” pore pressure/stress coupling - Implications for trap integrity evaluation

In petroleum industry, the difference between pore pressure (P_p) and minimum horizontal stress S_h (termed the seal or retention capacity) is of major consideration because it is often assumed to represent how close a system is to hydraulic failure and thus the maximum hydrocarbon column height that can be maintained. While S_h and P_p are often considered to be independent parameters, several studies in the last decade have demonstrated that S_h and P_p are in fact coupled. However, the nature of this coupling relationship remains poorly understood. In this paper, we explore the influences of the spatial pore pressure distribution on S_h/P_p coupling and then on failure pressure predictions and trap integrity evaluation. With analytical models, we predict the fluid pressure sustainable within a reservoir before failure of its overpressured shale cover. We verify our analytical predictions with experiments involving analogue materials and fluids. We show that hydraulic fracturing and seal breach occur for fluid pressure greater than it would be expected from conventional retention capacity. This can be explained by the impact of the fluid overpressure field in the overburden and the pressure diffusion around the reservoir on the principal stresses. We calculate that supralithostatic pressure could locally be reached in overpressured covers. We also define the retention capacity of a cover (RC) surrounding a fluid source or reservoir as the difference between the failure pressure and the fluid overpressure prevailing in shale at the same depth. In response to a localized fluid pressure rise, we show that the retention capacity does not only depend on the pore fluid overpressure of the overburden but also on the tensile strength of the cover, its Poisson’s ratio, and the depth and width of the fluid source.     

保德区块中低阶煤层压裂施工砂堵原因分析及技术对策

针对保德区块中低阶煤储层压裂过程中容易出现砂堵影响储层改造效果的问题,根据研究区块的地质条件,结合水力压裂时裂缝在煤层中的扩展规律,分析了保德区块煤层水力压裂出现砂堵的4类主要原因,分别为煤储层裂隙相对发育造成压裂液滤失量增加、压裂沟通高渗透性的顶底板、煤储层本身有效厚度大滤失量增大及多层合压造缝不充分。在此基础上,提出了相应的技术对策,使用清洁压裂液、适当提高并稳定施工排量及优化压裂施工设计,为现场的水力压裂施工和提高煤储层改造效果提供重要指导。