从辽宁东、西部地质对比论郯庐断裂的平移运动

辽宁东、西部地质上诸多差异并非是原地升降运动造成的，而是二个异地岩块经郯庐断裂大规模左旋平移运动迁移到一起的结果。辽东半岛原曾与鲁西－徐淮地区处于相同的古纬度。郯庐断裂北延的主干断裂应是抚顺－敦化断裂，它在辽宁境内是地层区划的重要界线。郯庐断裂在太古宙末期即已出现，曾多次变换其平移方向，最近一次大规模左行平移活动的高峰期是在晚侏罗世晚期－早白垩世，结束于孙家湾组或泉头组堆积之前。     

三峡地区地形变监测与区域地壳稳定性分析

利用三峡地区多年的地形变观测资料，分析了该区的地形变特征。结果表明，各断层活动性甚微或基本不活动，区域地壳相对稳定     

利用地震矩张量反演鲜水河断裂带现今运动学特征

本文探讨了利用地震矩反演断裂形变带运动学参数的基本理论和方法，将其初步应用于鲜水河断裂形变带变形分析和运动机制的研究。结果表明，鲜水河断裂带呈现出走向拉伸、倾向压缩的形变格局，由地震矩反演的断裂带剪切形变速率（１０．９ｍｍ／ａ）与用地质学估算方法（１７ｍｍ／ａ）和现今地壳形变测量（８ｍｍ／ａ）的结果相当。同时，反演出的应变主方向能解释鲜水河断裂现今活动分段性特征以及多种滑动方式共存的现状，从而证明该方法是目前研究区域运动学问题切实有效的手段之一。     

再论贺兰山南部北西向构造成因

贺兰山南部分布着多个方向的构造，其中最明显地是一系列的北西向构造，目前这些构造的相互关系以及形成机制还没有得到合理地解释，争论很大；野外构造研究表明，贺兰山南部北西向构造的形成与青铜峡一固原断裂活动有密切的关系，是该断裂由走滑运动向挤压运动转换时的派生构造；从另一角度也说明，在中新生代由青铜峡一固原断裂所限定的地块(卫宁北山)向东运动，而这些北西向构造的形成主要发生在新生代。由于卫宁北山向东运动的动力来源于青藏高原，因此，贺兰山南部北西向构造的形成与青藏高原的演化有密切的联系。所以。作为中国重要地质界限的南北向构造——贺兰山已经被青藏高原的构造活动所叠加。     

中国北西部金矿主要类型,分布规律和成矿带划分

本文较系统地总结了我国北西部金矿主要类型、矿化特征和金矿时空分布规律,在此基础上划分出4个成矿区、12条成矿带、32条成矿亚带,从而指明了找矿方向,为贯彻“以铀为主,综合找矿,多种经营,搞活地质”的方针,提供了较好的参考资料。     

1966年邢台7.2级地震的构造背景和发震构造

本文根据石油地质勘探的最新资料和元-济人工地震地壳测深剖面相应地段重新解释的结果,分析了邢台7.2级地震的构造背景和发震断裂。研究结果表明,7.2级地震震中位于束鹿断陷盆地南部次凹的东缘,该次凹发育在由新河断裂等4条缓倾铲形正断裂分制围限地台盖层而成的“斛”状构造块体上,块体之下的地壳中存在两条倾向相反的高角度断裂;地震与断陷主断裂及其控制的断陷盆地并非是简单的对应关系,7.2级地震的发震断裂不是单一的缓倾铲形新河断裂或其下方的高角度的F_3断裂和深部的东断裂,而是它们的组合,且高角度断裂是发震断裂的主要部分     

Holocene activity of the Scilla Fault, Southern Calabria: Insights from coastal morphological and structural investigations

Integration of on-land and offshore geomorphological and structural investigations coupled to extensive radiometric dating of co-seismically uplifted Holocene beaches allows characterization of the geometry, kinematics and seismotectonics of the Scilla Fault, which borders the eastern side of the Messina Strait in Calabria, Southern Italy. This region has been struck by destructive historical earthquakes, but knowledge of geologically-based source parameters for active faults is relatively poor, particularly for those running mostly offshore, as the Scilla Fault does. The  30 km-long normal fault may be divided into three segments of  10 km individual length, with the central and southern segments split in at least two strands. The central and northern segments are submerged, and in this area marine geophysical data indicate a youthful morphology and locally evidence for active faulting. The on-land strand of the western segment displaces marine terraces of the last interglacial (124 to 83 ka), but seismic reflection profiles suggest a full Quaternary activity. Structural data collected on bedrock faults exposed along the on-land segment provide evidence for normal slip and  NW-SE extension, which is consistent with focal mechanisms of large earthquakes and GPS velocity fields in the region. Detailed mapping of raised Holocene marine deposits exposed at the coastline straddling of the northern and central segments supplies evidence for two co-seismic displacements at  1.9 and  3.5 ka, and a possible previous event at  5 ka. Co-seismic displacements show a consistent site value and pattern of along-strike variation, suggestive of characteristic-type behaviour for the fault. The  1.5–2.0 m average co-seismic slips during these events document M_e  6.9–7.0 earthquakes with  1.6–1.7 ka recurrence time. Because hanging-wall subsidence cannot be included into slip magnitude computation, these slips reflect footwall uplift, and represent minimum average estimates. The palaeoseismological record based on the palaeo-shorelines suggests that the last rupture on the Scilla Fault during the February 6, 1783 M_w = 5.9–6.3 earthquake was at the expected time but it may have not entirely released the loaded stress since the last great event at  1.9 ka. Comparison of the estimated co-seismic extension rate based on the Holocene shoreline record with available GPS velocities indicates that the Scilla Fault accounts for at least  15–20% of the contemporary geodetic extension across the Messina Strait.     

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Deciphering polymetamorphic episodes in high-grade metamorphic orogens: Constraints from PbSL, Sm/Nd and Lu/Hf garnet dating of low- to high-grade metasedimentary rocks from the Kaoko belt (Namibia)

Three dating techniques for metamorphic minerals using the Sm–Nd, Lu–Hf and Pb isotope systems are combined and interpreted in context with detailed petrologic data from crustal segments in NW Namibia. The combination of isochron ages using these different approaches is a valuable tool to testify for the validity of metamorphic mineral dating. Here, PbSL, Lu–Hf and Sm–Nd garnet ages obtained on low- to medium-grade metasedimentary rocks from the Central Kaoko Zone of the Neoproterozoic Kaoko belt (NW Namibia) indicate that these samples were metamorphosed at around 550–560 Ma. On the other hand, granulite facies metasedimentary rocks from the Western Kaoko Zone underwent two phases of high-grade metamorphism, one at ca. 660–625 Ma and another at ca. 550 Ma providing substantial evidence that the 660–625 Ma-event was indeed a major tectonothermal episode in the Kaoko belt. Our age data suggest that interpreting metamorphic ages by applying a single dating method only is not reliable enough when studying complex metamorphic systems. However, a combination of all three dating techniques used here provides a reliable basis for geochronological age interpretation.     

Thin-section analysis as a tool to aid identification of palaeoearthquakes on the “slow”, active Geleen Fault, Roer Valley Graben

We analyzed thin sections from two palaeoseismic trenches across the low-slip-rate Geleen Fault in the Belgian Maas River valley to help identifying the most recent large palaeoearthquake on this fault segment. In the first trench we sampled silty sediment below and above a prehistoric stone pavement that was supposedly at or near the surface at the time of the event, and subsequently thrown down. The samples below show a well-developed in situ argillic Bt soil horizon in parent sediment containing remnants of stratification, whereas the sediment above is a structureless colluvium reworked at least partly from Bt-horizon material. Below the stone pavement, we also found evidence of contorted stratification, which is in agreement with macroscopic observations of both the sediment and the stone pavement itself, and which is attributed to co-seismic soft-sediment deformation. In the second trench, we sampled a sequence of vaguely discernible soil horizons in the hanging-wall, interpreted as a buried soil profile (Bt, E, and possibly A horizons), overlain by a featureless deposit. Thin-section analysis supports the colluvial nature of the latter, and also provides evidence that both the base of this layer and the top of the poorly developed A horizon below have occupied a shallow position in a soil profile. A sample from the same depth in the footwall is composed of very different material. Instead of colluvium, we find patches of Bt soil, most likely representing the same pedogenic level as the in situ Bt horizon at larger depth in the hanging-wall, but displaced and subsequently degraded. Furthermore, thin sections confirm that vertical structures cutting this Bt horizon are sand dykes. These dykes could be traced macroscopically upward to the base of the colluvium. In both trenches, we have thus identified a stratigraphic boundary in the hanging-wall, close to the surface, separating an in situ soil below from colluvium above. We interpret this limit and the overlying colluvium as the event horizon and the colluvial wedge, respectively, of a surface-rupturing palaeoearthquake. In addition, in both cases we found evidence of soft-sediment deformation (related to liquefaction) contemporaneous with the event within the stratigraphic resolution.