Static Analysis of Collision Strength of Offshore Platform

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.     

Evaluation of the Risk of Marine Slope Instability: A Pseudo-3D Approach for Application to Large Areas

This article presents a methodology developed to evaluate the instability of submarine slopes that extend over a large area. Special attention was paid to (1) the complex geometry (bathymetry) and the expanse of the slope, (2) the heterogeneity of the sediment, and (3) the distribution of the pore pressure. The safety factor was considered as a spatially varying quantity. The General Formulation (GLE, Fredlund and Krahn 1977), which fully satisfies equilibrium conditions, was used for evaluating the stability of the marine slope. The submarine slope failure, which occurred on 16 October 1979 during the construction of the new Nice airport, was studied in order to test the developed model. Geotechnical parameters were taken from experimental tests carried out by IFREMER on 19 cores extracted at different depths (from 27 m to 1300 m) (Cochonat, Bourillet, and Savoye, 1993; Mulder et al., 1994). Many scenarios were proposed in order to explain the cause of the Nice slope failure (Habib, 1994). In this article, two of those scenarios were tested. Simulation results are presented and discussed.     

Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.     

A new efficient 3D non-hydrostatic free-surface flow model for simulating water wave motions

A new three-dimensional, non-hydrostatic free surface flow model is presented. For simulating water wave motions over uneven bottoms, the model employs an explicit project method on a Cartesian the staggered gird system to solve the complete three-dimensional Navier–Stokes equations. A bi-conjugated gradient method with a pre-conditioning procedure is used to solve the resulting matrix system. The model is capable of resolving non-hydrostatic pressure by incorporating the integral method of the top-layer pressure treatment, and predicting wave propagation and interaction over irregular bottom by including a partial bottom-cell treatment. Four examples of surface wave propagation are used to demonstrate the capability of the model. Using a small of vertical layers (e.g. 2–3 layers), it is shown that the model could effectively and accurately resolve wave shoaling, non-linearity, dispersion, fission, refraction, and diffraction phenomena.     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.     

分离入射波与反射波的解析方法

提出了一种新的分离入射波和反射波的解析方法（AM）。利用两点处的 波高信息，运用Hilbert变换得到波浪信号在复域内的解析表达式，不需要计算合成波高和相位差即可实现信号的分离。根据分离结果，可以精确地估计入射波与反射波的幅值以及反射系数等参数，能够获得入射波与反射波之间的相位信息，并且可方便地用于不规则波的分离。文中通过数值模拟与物理模型实验对AM法进行了检验，所得的结果与实际值非常吻合。     

水中总氮的紫外分光光度分析法

本文采取K_2 S_2O_8氧化法,研究了氧化条件、紫外分光光度法测定总氮的最佳条件以及可能产生的干扰及消除方法。利用本法测定天然水中总氮回收率100±2％,检出限为0.010mg·dm~(-3)。方法快速准确,与Kjedahl法相比可提高工效27倍。     

A finite element model of interaction between viscous free surface waves and submerged cylinders

This paper describes the simulation of the flow of a viscous incompressible Newtonian liquid with a free surface. The Navier–Stokes equations are formulated using a streamline upwind Petrov–Galerkin scheme, and solved on a Q-tree-based finite element mesh that adapts to the moving free surface of the liquid. Special attention is given to fitting the mesh correctly to the free surface and solid wall boundaries. Fully non-linear free surface boundary conditions are implemented. Test cases include sloshing free surface motions in a rectangular tank and progressive waves over submerged cylinders.     

Modified mild slope equation and open boundary conditions

A numerical model to compute wave field is developed. It is based on the Berkhoff diffraction-refraction equation, in which an energy dissipation term is added, to take into account the breaking and the bottom friction phenomena. The energy dissipation function, by breaking and by bottom friction, is introduced in the Berkhoff equation to obtain a new equation of propagation.The resolution is done with the hybrid finite element method, where lagrangians elements are used.