Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

Experimental and numerical studies of rock salt strain hardening

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.     

不同岩性火山岩力学性质实验研究

黄沙坨地区位于辽河断陷盆地东部凹陷中段,古近纪沙河街组第三段沉积时期发育了巨厚的火山岩,为该区形成火山岩油气藏奠定了成藏条件。由于油层岩石的力学性质,影响着油田生产,因此,经过实验室对不同岩性的火山岩力学性质的试验测试,得到油田生产所需的相关的力学参数及相关的地质信息,为油田勘探、开发及相关的工程设计发挥重要作用。试验结果表明,粗面岩以张性破裂为主,玄武岩以剪切破裂为主。这对油田研究水力压裂裂缝形态及储层天然裂缝形态提供了重要的地质依据。软化系数的较大波动,表现出地下流体对油层岩石的环境作用。     

杨庄截潜工程趾板段帷幕灌浆效果分析

杨庄截潜工程趾板段建基面以下为弱风化白云岩和含燧石条带白云岩,透水性较强,造成库水漏失严重.为解决建基面以下基岩渗漏问题,采用趾板段帷幕灌浆封堵基岩裂隙而形成防渗帷幕,以减少库水漏失.通过趾板段帷幕灌浆达到封堵基岩裂隙的目的,满足工程设计的防渗要求.     

采矿引起的边坡倾倒滑移变形机理与变形安全性分析研究—以抚顺西露天矿边坡为例

在矿山开发、水电建设过程中倾倒变形问题日渐突出。倾倒变形边坡一般具有反倾边坡结构,变形的过程和机理比较复杂、涉及的变形岩体范围较大、危害严重。论文以抚顺西露天矿边坡为例,通过岩体位移监测资料的跟踪分析、底面摩擦模拟试验,以岩体力学、松散介质力学原理为理论基础,探讨了采矿影响下边坡倾倒滑移体的变形机理,分析认为采矿引起的倾倒滑移变形问题是在特定的地质构造和采矿工程条件下产生的,并提出了岩体变形安全性分析方法。通过工程实例,验证了方法的实用性,并针对实际问题提出了变形整治对策。     

洪山预测区煤层赋存的可能性分析

分析了洪山预测区西部洪山岩体地质特征及其向外围扩散的范围和程度，研究了北掌勘查区和焦窑煤矿两邻区煤层受岩浆岩影响的程度，认为洪山岩体对预测区煤系及煤层赋存的影响较小，岩体外围仍有煤系赋存。为下一步找煤指明了方向。     

Influence of sedimentary environments on mechanical properties of clastic rocks

The sedimentary environments are the intrinsic factor controlling the mechanical properties of clastic rocks. Examining the relationship between rock sedimentary environments and rock mechanical properties gives a better understanding of rock deformation and failure mechanisms. In this study, more than 55 samples in coal measures were taken from seven different lithologic formations in eastern China. Using the optical microscope the sedimentary characteristics, such as components of clastic rocks and sizes of clastic grains were quantitatively tested and analyzed. The corresponding mechanical parameters were tested using the servo-controlled testing system. Different lithologic attributes in the sedimentary rocks sampled different stress–strain behaviors and failure characteristics under different confining pressures, mainly due to different compositions and textures. Results demonstrate that clastic rocks have the linear best-fit for Mohr-Coulomb failure criterion. The elastic moduli in clastic rocks are highly dependent upon confining pressures, unlike hard rocks. The envelope lines of the mechanical properties versus the contents of quartz, detritus of the grain diameter of more than 0.03 mm, and grain size in clastic rocks are given. The compressive strength or elastic modulus and the grain diameter have a non-monotonic relation and demonstrate the “grain-diameter softening” effect.     

皖中泥质岩工程性质探讨

历来对半胶结泥质岩风化等级划分都带有许多主观性,从而影响提承载力,有的规范要求可不对半胶结岩石进行风化程度划分,但有时要对这些岩石进行工程地质细分,从而准确确定各分层的承载力与摩阻力。统计了合肥、六安、淮南、安庆地区等大量实践资料,用标准贯入击数、重型圆锥触探实验击数等原位测试手段来划分泥质岩风化等级,并对泥质岩的承载力与摩阻力等工程地质性质做出了评价。