基于SRTM数据的天气雷达探测环境分析研究

利用SRTM高程数据作为选址基础数据,结合天气雷达工作方式和探测方法,计算得到天气雷达在0.5°、1.0°、2.4°仰角上地物遮挡情况;利用高程格点数据获得3个仰角的地物剖面数据,提高了SRTM数据利用精度和运算速度;分析中结合地球曲率和电磁波折射影响,改进算法获得站点遮蔽角图,站点上空1 km、海拔3和6 km等射束高度图及数据,该分析结果充分体现了SRTM数据的高分辨率特点。最后将结果数据与GIS地图结合,完成了四川省天气雷达网探测环境分析,并给出了各个台站评估结果。     

Structural, electronic and optical properties of orthorhombic distorted perovskite TbMnO3

This paper calculates the structural parameters, electronic and optical properties of orthorhombic distorted perovskite-type TbMnO₃ by first principles using density functional theory within the generalised gradient approximation. The calculated equilibrium lattice constants are in a reasonable agreement with theoretical and experimental data. The energy band structure, density of states and partial density of states of elements are obtained. Band structures show that TbMnO₃ is an indirect band gap between the O 2p states and Mn 3d states, and the band gap is of 0.48 eV agreeing with experimental result. Furthermore, the optical properties, including the dielectric function, absorption coefficient, optical reflectivity, refractive index and energy loss spectrum are calculated and analysed, showing that the TbMnO₃ is a promising dielectric material.     

An improved SPH method for saturated soils and its application to investigate the mechanisms of embankment failure: Case of hydrostatic pore‐water pressure

The method of smoothed particle hydrodynamics (SPH) has recently been applied to computational geomechanics and has been shown to be a powerful alternative to the standard numerical method, that is, the finite element method, for handling large deformation and post‐failure of geomaterials. However, very few studies apply the SPH method to model saturated or submerged soil problems. Our recent studies of this matter revealed that significant errors may be made if the gradient of the pore‐water pressure is handled using the standard SPH formulation. To overcome this problem and to enhance the SPH applications to computational geomechanics, this article proposes a general SPH formulation, which can be applied straightforwardly to dry and saturated soils. For simplicity, the current work assumes hydrostatic pore‐water pressure. It is shown that the proposed formulation can remove the numerical error mentioned earlier. Moreover, this formulation automatically satisfies the dynamic boundary conditions at a submerged ground surface, thereby saving computational cost. Discussions on the applications of the standard and new SPH formulations are also given through some numerical tests. Furthermore, techniques to obtain the correct SPH solution are also proposed and discussed throughout. As an application of the proposed method, the effect of the dilatancy angle on the failure mechanism of a two‐sided embankment subjected to a high groundwater table is presented and compared with that of other solutions. Finally, the proposed formulation can be considered a basic formulation for further developments of SPH for saturated soils. Copyright © 2011 John Wiley & Sons, Ltd.     

A generalized conditional intensity measure approach and holistic ground‐motion selection

A generalized conditional intensity measure (GCIM) approach is proposed for use in the holistic selection of ground motions for any form of seismic response analysis. The essence of the method is the construction of the multivariate distribution of any set of ground‐motion intensity measures conditioned on the occurrence of a specific ground‐motion intensity measure (commonly obtained from probabilistic seismic hazard analysis). The approach therefore allows any number of ground‐motion intensity measures identified as important in a particular seismic response problem to be considered. A holistic method of ground‐motion selection is also proposed based on the statistical comparison, for each intensity measure, of the empirical distribution of the ground‐motion suite with the ‘target’ GCIM distribution. A simple procedure to estimate the magnitude of potential bias in the results of seismic response analyses when the ground‐motion suite does not conform to the GCIM distribution is also demonstrated. The combination of these three features of the approach make it entirely holistic in that: any level of complexity in ground‐motion selection for any seismic response analysis can be exercised; users explicitly understand the simplifications made in the selected suite of ground motions; and an approximate estimate of any bias associated with such simplifications is obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

一种胶体光子晶体修饰的光纤

设计了一种胶体光子晶体修饰的光纤. 采用恒温快速蒸发法直接在经切割刀处理后的光纤端面生长胶体晶体,再与另一根切割后的光纤在毛细玻璃管中完成对接,制备成胶体光子晶体修饰的光纤. 用扫描电子显微镜和光谱分析仪对样品的形貌、结构以及光学特性进行分析. 实验结果表明,粒径为640 nm、体积分数约为0.5%的SiO₂胶体微球溶液在60 ℃的情况下沉积,大约12 h后可得到质量较高的胶体光子晶体. 在SEM下,观察到端面的胶体晶体为面心立方(fcc)结构. 透射光谱证明,该结构在(111)面上     

塔里木盆地西北缘中奥陶统、下志留统的空间分布特征及其相变的遥感分析

根据塔里木盆地西北缘中奥陶统和下志留统各组岩石的光谱特征分析，选择了ＴＭ３/１（Ｙ）２/３（Ｍ）７/５（Ｃ）减色比值合成影像对研究区岩石地层层序进行划分和对比，划分出Ｏ1₂、Ｏ2₂、Ｏ3₂、Ｓ1₁和Ｓ2₁等５个影像岩石地层单元，它们与研究区的岩性组一致，但其精度高于研究区１:２０万地质图。通过影像岩石地层的对比研究发现，研究区西部皮羌断裂以西在中奥陶世几乎未接受沉积，皮羌断裂以东出现了坎岭组，再往东至研究区东部，中奥陶统沉积较全；早志留世早期研究区西部沉积了海相红层，往研究区东部则相变为海相绿色地层。尤其是通过ＴＭ比值图像的分析，发现前人认为分布很局限，但具有很大生油潜力的印干组在研究区分布范围较广，并推断其沉积中心位于与研究区相邻的塔北隆起和北部坳陷一带。这为塔里木盆地油气评价和勘探提供了新的资料，并表明ＴＭ遥感数据的应用是沉积盆地油气勘探研究中的一种很有潜力技术方法。     

MULTIVARIATE SELECTION OF VARIABLES IN INDUSTRIAL QUALITY CONTROL:OPTIMIZING AVIATION FUEL FINAL CONTROL

This paper deals with a typical question encountered in all industrial analytical laboratories:are all thetests performed in the laboratory to characterize the final product really necessary?In this work the cross-validation technique,Procrustes rotation techniques and statistical variable selection have been used toreduce the 26 initial British Petroleum and ASTM kerosene specification tests to ten'essential'ones.Statistical as well as chemical considerations were used to select the optimum subset of original variablesto be retained from all the possible ones.     

近代回归分析在交通调查分析建模中的应用

本文以出行发生量模型的建立为例,较为系统地讨论了近代回归分析中的自变量选择及回归诊断方法在交通调查分析建模中的应用。分析了在获取调查数据后,如何借助回归自变量选择方法来选择最佳自变量子集,以确定简捷的回归模型;文中应用回归诊断方法,讨论了修正回归模型、探测错误的调查数据的方法,从而为建立简捷、高精度的交通模型打下了基础。最后,作者提出了应用自变量选择及回归诊断方法建立出行发行量模型的一般步骤。     

Complete synthetic seismograms for high-frequency multimodeSH-waves

We present an efficient scheme to compute high-frequency seismograms (up to 10 Hz) forSH-waves in a horizontally stratified medium with the mode summation method. The formalism which permits the computation of eigenvalues, eigenfunctions and related integral quantities is discussed in detail. Anelasticity is included in the model by using the variational method. Phase velocity, group velocity, energy integral and attenuation spectra of a structure enable the computation of complete strong motion seismograms, which are the basic tool for the interpretation of near-source broad-band data.Different examples computed for continental structures are discussed, where one example is the comparison between the observed transversal displacement recorded at station IVC for the November 4, Brawley 1976 earthquake and synthetic signals. In the case of a magnitudeM _L =5.7 earthquake in the Friuli seismic area we apply the mode summation method to infer from waveform modeling of all three components of motion of observed data some characteristics of the source.On leave from Institute of Geophysics, ETH, Zürich, Switzerland.     

TM数据的Kauth-Thomas变换在盐渍土分析中的作用——以阳高盆地为例

本文就经过Kauth-Thomas变换的TM数据用于雁北阳高盆地盐渍化程度分析进行了探讨。通过模拟TM数据和TM影像数据进行变换分析,并与标准假彩色合成和K-L变换比较,取得了较好的结果。