南华北地区石炭-二叠系砂岩和泥岩中粘土矿物的形成与转化

区内砂岩中的粘土矿物主要是自生的高岭石、绿泥石和伊蒙混层，而泥岩中的粘土矿物是伊蒙混层和高岭石，少量绿泥石。未见蒙脱石。砂岩和泥岩中粘土矿物的转化具有相似的水介质和地温条件，都反映出在中—晚成岩期形成，而且与烃类的排出和运移密切相关。泥岩中粘土矿物转化和脱水作用为砂岩输送流体和释放溶解物质。而且泥岩中有机质的脱羟基向砂输送酸性水，促进砂岩中骨架颗粒溶解、次生孔隙的产生。     

济阳坳陷横波速度研究及应用

随着多波勘探的发展,横波已越来越多地应用在实际勘探生产中,横波速度参数研究对于指导勘探是十分必要的.笔者利用纵横波VSP测井得到的纵横波速度,根据最小平方误差建立的速度模型,建立了济阳坳陷的纵波、横波、转换波速度参数,应用转换波速度参数提高了盐家地区的多波资料解释精度;利用多种资料总结出纵横波速度关系,为本区今后开展多波勘探提供基础资料.     

大庆徐家围子地区深部致密砂砾岩气层识别

大庆徐家圈子地区深部致密砂砾岩储层的骨架成分除了含有石英、长石外，还含有许多酸性喷发岩，而且各种骨架成分的含量随深度变化比较大；复杂的岩性使得气的影响被岩性的影响所淹没，从而造成常规气层识别方法失效。针对这一问题，应用神经网络方法准确求取地层颗粒密度和泥质含量，然后对中子和密度测井值进行岩性影响校正和泥质影响校正，使得求出的中子和密度孔隙度仅受地层气的影响，最后将得到的中子和密度孔隙度进行对比，应用中子和密度孔隙度的差异识别气层。     

地浸砂岩型铀矿床微磁异常研究及其找矿意义

通过认真研究中国新疆某盆地410，411和412三个已知地浸砂岩型铀矿床的航磁资料，发现这些矿床上方均存在航磁微磁异常。根据地浸砂岩型铀矿的成矿地球化学机制，对航磁微磁异常的形成机理作了进一步探讨，结合试验区的实际预测成果指出，与氧化一还原过渡带有关的地浸砂岩型铀矿床上方存在微磁异常，高精度航磁完全能探测得到它。航磁微磁异常是此类矿床的特征异常之一，对此类铀矿床具有直接的指示意义，可以作为一种直接标志信息运用于前期成矿预测。     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.     

Influence of Changes in the Prevailing Synoptic Conditions on the Response of Aerosol Characteristics to Land- and Sea-Breeze Circulations at a Coastal Station

The changes in the response of near surfaceaerosol properties to land- and sea-breezecirculations, associated with the changes in the prevailing synoptic meteorological conditions, are examined for a tropical coastal station. Aerosol properties are nearly similar in both the breeze regimes (land and sea) during seasons of marine airmass while they are distinct during seasons of continental airmass. As the prevailing winds shift from continental to marine and the ambient weather changes from winter conditions to the humid monsoon season, the submicron mode, which dominated the aerosol mass-size distribution, is largely suppressed and the dominance of the super micron mode increases. During periods of continental air mass (winter), the aerosol loading is significantly higher in the land-breeze regime, (particularly in the submicron range) but as the winds shift to marine, the loading initially becomes insensitive to the breeze regimes and later becomes higher in the sea-breeze regime, particularly in the super micron range.     

华北北部场源前兆观测资料分析(一)──场源前兆特征与机制

1976年唐山地震前，在距震源很远的地区内都观测到一些前兆趋势变化，如重力、重力位二次徽商W△、水氧、地电阻率、水位和油井出油量等变化。作者认为这些变化不是由震源体直接引起的，而是在区域应力场的作用下，在某些活动断层附近，浅层岩，尤其是含水砂岩层和含油层受挤压出现的一些与地震有关的异常现象。其特征是：（1）异常范围大，可能在距震源很远的地方发生，但就同一种方法的多个观测点来说却又是局部的，即只有其中部分测点才能观测到异常，不少测点观测不到异常。（2）异常发生的时间大致相同。有些异常有同步变化的特征，如同时上升或同时下降。（3）临震前多数异常有恢复的趋势。这些特征与引起异常的机理有关。作者还从理论上计算了这种趋势异常量级，重力变化100×10-6cm／s2左右，重力位二次微商变化（1～2）×10－9／s2，地电阻率变化2％～3％，Rn变化7．4～11．1Bq／L，这样的变化量在活动断层附近的一些台站可能观测到。作者还研究了干旱降雨对某些前兆的影响，其影响量级可以被一些方法观测到，因此在确定是否是地震异常时，必须注意利用综合分析的方法排除干旱降雨的影响，减少异常的多解性。     

砂岩岩脉(岩墙、岩床)的一种可能成因——冲蚀沟槽的充填

黄河三角洲的边滩、心滩上发育了大量冲蚀沟槽（冲槽）．这些冲蚀沟槽深数厘米至1m～2m，宽数厘米至数米，长数十厘米至十几、二十余米，但以深数十厘米，宽数厘米至十余厘米，长数米者多见。形态多样，有直立板片状、直立楔状、“⊥”状、梯形状、“U”形状及树枝状等，其内有时被风成砂充填。经成岩作用后，它们便会转变成砂岩岩脉（岩墙、岩床）。因此，冲蚀沟槽的（砂）充填可能是一种砂岩岩脉（岩墙、岩床）的形成方式．     

临兴上古生界致密储层裂缝发育特征及对致密气富集影响

临兴区块上古生界储集层为致密砂岩，裂缝发育特征及对致密气富集影响尚不清楚，一定程度上制约了甜点区预测。 根据岩心、露头、薄片及测井资料，分析了研究区裂缝发育特征，探讨了裂缝对致密砂岩气富集的影响。临兴区块上古生界主 要发育高角度缝，其次为中低角度缝及水平缝，微观上根据裂缝与矿物颗粒的相对位置关系，可识别出粒内缝、粒缘缝和穿粒 缝，其中粒缘缝最为发育。受塑性泥岩阻挡，裂缝垂向延伸较差，一般延伸1~2 m后消失于泥岩层中，受燕山期北西—南东向 地应力影响，裂缝走向多为北东—南西向，裂缝密度一般2~5条/ｍ。裂缝可改善储集空间、提高油气充注效率，储层裂缝发育 区渗透率可增大1~2个数量级，含气饱和度高，此外，研究区裂缝是油气垂向运移的有效通道，影响着石盒子组及石千峰组致 密气的富集，在后期的勘探开发过程中应充分寻找裂缝发育区，并通过进一步压裂获得高产。