基于多源数据的三维城市建模方法

以天津新港三维城市建模为例,介绍了基于二维数据、DEM和3D模型等多源数据的三维城市建模的方法和关键技术。为有效利用现有数据资源快速、准确建立三维城市模型提供了一种经济、灵活、省时、高效的方法。     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Variability of organic δC and C/N in the Mersey Estuary, U.K. and its implications for sea-level reconstruction studies

Microfossil analysis (e.g. diatoms, foraminifera and pollen) represents the cornerstone of Holocene relative sea-level (RSL) reconstruction because their distribution in the contemporary inter-tidal zone is principally controlled by ground elevation within the tidal frame. A combination of poor microfossil preservation and a limited range in the sediment record may severely restrict the accuracy of resulting RSL reconstructions. Organic δ¹³C and C/N analysis of inter-tidal sediments have shown some potential as coastal palaeoenvironmental proxies. Here we assess their viability for reconstructing RSL change by examining patterns of organic δ¹³C and C/N values in a modern estuarine environment. δ¹³C and C/N analysis of bulk organic inter-tidal sediments and vegetation, as well as suspended and bedload organic sediments of the Mersey Estuary, U.K., demonstrate that the two main sources of organic carbon to surface saltmarsh sediments (terrestrial vegetation and tidal-derived particulate organic matter) have distinctive δ¹³C and C/N signatures. The resulting relationship between ground elevation within the tidal frame and surface sediment δ¹³C and C/N is unaffected by decompositional changes. The potential of this technique for RSL reconstruction is demonstrated by the analysis of part of an early Holocene sediment core from the Mersey Estuary. Organic δ¹³C and C/N analysis is less time consuming than microfossil analysis and is likely to provide continuous records of RSL change.     

Comparison of two three-dimensional hydrodynamic modeling systems for coastal tidal motion

A comparison of two three-dimensional numerical modeling systems for tidal elevations and velocities in the coastal waters is presented. The two modeling systems are: (1) the Princeton Ocean Model (POM) and (2) the MIKE 3 flow model. The model performance results for Singapore's coastal waters show that the predicted tidal elevations from the two hydrodynamic modeling systems are almost identical and are in very good agreement with field measurement data. The simulated tidal current velocities match well with field measurement data at the selected stations, but it seems that the POM provides the slightly better simulation, compared to the MIKE 3 flow model. The depth profiles of the velocities obtained from the two modeling systems may be greatly different at some time, due to the vertical diffusion coefficient calculated from different turbulent sub-models in the two modeling systems. The POM generally predicts larger peak tidal velocities. The maximum speed differences for the model results from the two modeling systems occur in the top and differ from time to time and from location to location, reaching up to 20%.     

三维符号构成及建模方法研究

随着计算机软硬件技术和三维可视化技术的快速发展,二维平面电子地图正在向直观、形象的三维电子地图方向过渡,而原来的二维地图符号已难以满足三维场景逼真性的要求,它必然要求与之配套的三维符号理论和技术的产生。由于三维符号如何构成及怎样标注尚无标准可遵循,在对三维符号的构成、分类及建模方法进行分析的基础上,提出了实体模型符号的两种建模方法,实验表明它们切实可行,能较好地表达三维实体模型。     

回填贝壳砂耐久性试验研究

介绍了对我国浅海大量存在的贝壳砂进行化学性质和耐久性试验研究结果,从贝壳在酸雨中质量损失、溶蚀对贝壳成分和形态的影响及溶蚀对贝壳砂工程特性的影响三方面研究了贝壳砂的化学性质和耐久性,发现酸雨对贝壳有一定的溶蚀作用,在贝壳表面形成溶蚀凹坑,但是溶蚀作用缓慢,质量损失很小,酸雨溶蚀和海水溶出后的贝壳砂工程特性与未溶蚀的贝壳砂的工程特性相近,因而贝壳砂可用作海洋工程或港口工程回填砂。     

不同生长期坛紫菜多糖中组分含量的变化

于１９９０－１９９１年，运用＾１３Ｃ－ＮＭＲ和化学分析方法研究南方产和移植北方养殖的不同生长发育阶段坛紫菜多糖的组分变化，结果表明，随着藻体生长发育，坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖和６－ＯＣＨ３－Ｄ－半乳糖的含量逐渐增加，而硫酸基的含量呈现先增加后减少的规律；北移坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖的含量高于南方坛紫菜，而硫酸基和６－ＯＣＨ３－Ｄ－半乳糖的含量低于南方坛紫菜。     

晚更新世末期东亚季风活动与陆架区沉积环境变迁

从距今 18 0 0 0年的最后冰期最盛时期到距今 10 0 0 0年开始的全新世海侵 ,全球气侯发生过急剧的变化。位于亚洲东部的古季风活动也经历了盛衰变化。大量的钻孔及浅地层剖面分析资料已经证实 ,冰期最盛时期陆架区古季风活动加强 ,陆架出现了沙漠环境与黄土沉积。当冰期结束 ,气候转暖 ,冬季风减弱之际 ,南黄海陆架及长江三角洲一带的沙漠与黄土分布范围也随之缩小 ,原先的沙漠活动区变成了黄土分布区 ,也就是所谓硬粘土沉积区。随着古季风活动的进一步衰退和海面的不断升高 ,来自陆架区的东北风变为冷湿气流。长江三角洲地区和陆架上出现了有利于沼泽发育的环境 ,全新世海侵把泥炭层淹没。陆架区晚更新世末期以来的地层中出现沙层、硬粘土和泥炭层的沉积序列 ,即“三元沉积结构”,是古冬季风盛衰过程的最好记录     

胶州湾口海底沙波的类型、特征及发育影响因素

采用多波束资料对胶州湾口的海底沙波类型、特征进行了研究,发现研究区主要有线性沙波(二维)、沙丘(三维)2种沙波类型。结合水流流速、海底构造和表层沉积物综合分析发现:海底沙波缓坡朝向与优势流向不完全一致,为强流作用的产物,在涨、落潮作用下均可形成;沉积物的多寡是研究区海底沙波类型分布的决定因素,海底松散沉积物较为丰富的地区形成二维沙波。在水动力强大的胶州湾口,沉积物多分布在构造低洼地带,使二维线性沙波的分布与海底断裂延伸方向一致。     

Geochemical cycling in the Hooghly estuary, India

U–Th decay series isotopes, δ¹⁸O and Si measurements in the river estuarine waters and sediments of the polluted Hooghly estuary as well as the surface waters of the Bay of Bengal, its high salinity end member, are reported. Dissolved Si indicates that there are probably two mixing regimes, dissolved U behaviour is nonconservative and δ¹⁸O behaves conservatively in the overall estuarine region. Isotopes of reactive elements, viz. ²³⁴Th and ²¹⁰Po, are removed from the estuarine waters in <2 days and <1 month, respectively, which is due to high suspended matter (30–301 mg l⁻¹). ²²⁸Ra and ²²⁶Ra are profusely released into the estuarine waters in the low to mid-salinity regions.As expected, the opposite trend is observed in the case of estuarine sediments and suspended matter. Reactive isotopes of Th, ²¹⁰Pb and ²¹⁰Po are enriched, whereas Ra isotopes are depleted with respect to their parent nuclides in the estuarine sediments and suspended matter. ²³²Th/Al ratio appears well suited to study the distribution and mixing of the bed load sediments of the Ganga–Brahmaputra (G–B) and the Hooghly rivers with those from other rivers on the Bay of Bengal floor.