胶东金矿床碳酸盐矿物的碳-氧和锶-钕同位素地球化学研究

对胶东四类金矿床(盆地边缘砾岩型、斑岩型-浅成热液型、石英脉型和破碎带蚀变岩型)矿石中的碳酸盐矿物开展了系统的碳-氧同位素和锶-钕同位素地球化学研究。研究结果表明，与宏观的成矿地质条件和矿床地质特征相对应，山东金矿床可能有亲岩浆岩和亲沉积盆地两个不同的成矿系统。前者包括斑岩型-浅成热液型、石英脉型和破碎带蚀变岩型三类金矿床，后者指盆地边缘砾岩型金矿床，二者具有不同的碳-氧和锶-钕同位素地球化学特征。山东亲岩浆岩系列的金矿床，其锶-钕同位素与同时代的幔源岩浆岩一致，碳同位素显示幔源碳和岩浆碳的特征，氧同位素则显示初生水与大气降水不同比例混合的可能性，因此有可能是以CO2为主、富合成矿金属的地幔流体与浅部下渗大气降水相互作用的结果。而与岩浆岩关系不密切、主要受盆地边缘断裂控制的盆地边缘砾岩型金矿床，其碳-氧和锶-钕同位素组成均较分散，可能主要与地壳浅部下渗大气降水对上地壳各种岩石淋滤萃取演化而成的成矿流体有关。     

桩承载力时效对桩土相互作用及沉降的影响分析

对软土中两根47 m长灌注桩分别在成桩28 d和1 750 d后进行了承载力试验，其极限承载力提高幅度达到30％左右。分析了单桩承载力随时间提高(称为时效)的机理，提出了单桩承载力时效对桩筏基础桩土相互作用影响的分析方法，并结合工程实例进行了分析。     

振动沉模大直径现浇薄壁管桩技术及其应用 (Ⅰ):开发研制与设计

振动沉模现浇混凝土薄壁管桩（PCC桩）技术是河海大学自主开发研制的用于地基加固处理的专利技术，是一种适合于软土地区的新型高效优质桩型，可有效地提高地基承载力和减小地基沉降。笔者介绍了振动沉模现浇混凝土薄壁管桩的技术原理、加固机理、施工设备、施工工艺及其设计与质量检测方法。该桩型具有承载力高、质量可靠和工程造价低等优点，具有较大的推广应用价值。     

南华北地区石炭-二叠系砂岩和泥岩中粘土矿物的形成与转化

区内砂岩中的粘土矿物主要是自生的高岭石、绿泥石和伊蒙混层，而泥岩中的粘土矿物是伊蒙混层和高岭石，少量绿泥石。未见蒙脱石。砂岩和泥岩中粘土矿物的转化具有相似的水介质和地温条件，都反映出在中—晚成岩期形成，而且与烃类的排出和运移密切相关。泥岩中粘土矿物转化和脱水作用为砂岩输送流体和释放溶解物质。而且泥岩中有机质的脱羟基向砂输送酸性水，促进砂岩中骨架颗粒溶解、次生孔隙的产生。     

多孔结构矿物（岩石）及其环境修复材料的实用性

具有多孔结构的矿物(岩石)作为一类特殊的工业原材料，在环境修复领域的应用前景正在成为研究热点。本文从微孔的尺度、结构、形态、成分等表面固体特征出发，概括性地论述了凹凸棒石、海泡石、蒙脱石、沸石、硅藻土等十几种多孔结构矿物(岩石)在环境修复工程中用作过滤材料、吸附剂、离子交换剂和催化剂等材料时的基本特征和使用时应注意的问题。     

博格达山晚石炭纪造山活动的变形地质记录

主要由钙碱性火山岩、火山碎屑岩组成的博格达古岛弧是天山缝合造山带的重要组成部分 ,是一个发育较成熟的山链 ,其演化经历了晚古生代的韧性剪切收缩 ;中生代伸展调整及新生代再造山过程。晚古生代的造山活动在博格达山有很好的地质记录 ,并以显著的韧性剪切变形带的形成和发育同造山的褶皱构造为特点。剪切变形带内同构造的石英脉中的锆石U PbSHRIMP测年结果与山链中花岗岩、辉长岩年龄颇为一致 (311～ 316Ma) ,这个年龄反映在结束洋盆散聚、碰撞焊接的晚华力西期造山过程中 ,博格达古岛弧内存在一次虽不甚强烈 ,但又较为明显的构造岩浆事件 ,其成因可能与引起石炭纪大规模裂陆式喷发的深部断裂构造重新活动有关。     

U–Pb zircon chronostratigraphy of early-Pliocene ignimbrites from La Pacana, north Chile: implications for the formation of stratified magma chambers

High spatial resolution U–Pb dates of zircons from two consanguineous ignimbrites of contrasting composition, the high-silica rhyolitic Toconao and the overlying dacitic Atana ignimbrites, erupted from La Pacana caldera, north Chile, are presented in this study. Zircons from Atana and Toconao pumice clasts yield apparent ²³⁸U/²⁰⁶Pb ages of 4.11±0.20 Ma and 4.65±0.13 Ma (2σ), respectively. These data combined with previously published geochemical and stratigraphic data, reveal that the two ignimbrites were erupted from a stratified magma chamber. The Atana zircon U–Pb ages closely agree with the eruption age of Atana previously determined by K–Ar dating (4.0±0.1 Ma) and do not support long (>1 Ma) residence times. Xenocrystic zircons were found only in the Toconao bulk ignimbrite, which were probably entrained during eruption and transport. Apparent ²³⁸U/²⁰⁶Pb zircon ages of 13 Ma in these xenocrysts provide the first evidence that the onset of felsic magmatism within the Altiplano–Puna ignimbrite province occurred approximately 3 Myr earlier than previously documented.     

Nonlinear Rate Dependent Model of High Damping Rubber Bearing

The accurate analysis of the response of isolated structures requires the application of appropriate models of isolation devices. The purpose of this paper is to analyse a nonlinear strain rate dependent model of a high damping rubber bearing which simulates the horizontal behaviour of the device under specified vertical load using a nonlinear elastic spring-dashpot element. The effectiveness of the model is checked by fitting the experimental data concerning three different rubber bearings. The results of the study show that the model can simulate the bearing behaviour over a wide shear strain range with small simulation errors. This revised version was published online in July 2006 with corrections to the Cover Date.     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

Efficiency of base isolation systems in structural seismic protection and energetic assessment

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.