西天山艾肯达坂组火山岩系同位素定年及其构造意义

西天山艾肯达坂地区较好发育了艾肯达坂纽红色陆相火山岩建造．它不整合在下石炭统大哈拉军山组之上,未经变形和变质，属于陆陆碰撞晚期的橄榄安粗岩系，其年龄确定是厘定从碰撞造山向陆内构造演化的关键。因此,通过16件新获得的钾氩年龄测值，确定艾肯达坂组火山岩系形成在260Ma～270Ma之间，属早二叠世，而不是过去认为的石炭纪；西天山的陆陆碰撞应在二叠纪末结束,此后进入陆内造山阶段。     

新疆天山表壳元素地球化学特征

根据天山地区(42～44^oN，81～89^oE)1：20万，七探采集的900余个岩石样品的分析结果，基于全样本统计和迭代剔除方法，得到新疆天山地区表壳(出露地壳)的39种元素丰度值；对其中的SiO2、TiO2、Al2O3、TFe2O3、MgO、MnO、CaO、Na2O、K2O、P2O5 10种常量元素，按氧化物之和为100％进行归算。与全球大陆上地壳元素丰度值相比，天山地区表壳元素丰度富集SiO2、MnO和Ag、As、Hj、Sb元素，明显亏损CaO和。Be、Co、Cr、Ni、Mo、Sn，V、W等元素。从元素比值来看，该区表壳的Ba/La、K／La、K／Th、Nb/La、Th/La、Y／La值与全球大陆上地壳相应元素值相当；而K／Na、La／As、La／Sb值明显低于全球大陆上地壳。该区表壳化学成分相当于花岗闪长岩，同时表现出相对富钠和As、Sb元素的特征；这一地球化学特征与区内出露的表壳岩石主要是加里东期和海西期岛弧造山作用的产物有关，相对富钠的成分特征与岛弧岩浆活动中的Adakite质岩浆作用有关。     

西秦岭三个典型金矿床稳定同位素地球化学特征

据八卦庙金矿、李坝金矿、小沟里金矿稳定同位素研究,金矿床δ34S比正常沉积岩变化范围窄,比岩浆-火山岩型矿床宽,硫源是海水硫酸盐还原硫与深部热液来源硫所组成的混合硫。石英包裹体流体氢、氧同位素分布于岩浆水、大气降水的重叠过渡区,更靠近岩浆水区,岩浆水的同位素特征更明显。八卦庙金矿石英脉3He/4He高于地壳3He/4He值(n×10-8),低于地幔3He/4He值(n×10-5),为壳-幔混合源。上述同位素地球化学证据表明,金成矿与岩浆岩有一定的成因关系。岩浆岩与金矿床空间关系密切,矿区内脉岩发育,脉岩为矿体的上下盘。含矿岩石中发育斑点构造,斑点为黄铁矿、磁黄铁矿、毒砂、绿泥石、石英、绢云母、黑云母、堇青石、红柱石、电气石、碳酸盐等热变质矿物和热液交代矿物,表明花岗岩为成矿提供热动力。据八卦庙金矿、李坝金矿、小沟里金矿稳定同位素地球化学研究,结合成矿地质背景分析和区域成矿地质特征对比,认为凤太、西成、礼岷地区金矿与微细浸染型(卡林型)金矿有明显的差别,该区金矿类似于岩浆热液矿床。     

Isotope provinces, mechanisms of generation and sources of the continental crust in the Central Asian mobile belt: geological and isotopic evidence

The available geological, geochronological and isotopic data on the felsic magmatic and related rocks from South Siberia, Transbaikalia and Mongolia are summarized to improve our understanding of the mechanisms and processes of the Phanerozoic crustal growth in the Central Asian mobile belt (CAMB). The following isotope provinces have been recognised: ‘Precambrian’ (T_DM=3.3–2.9 and 2.5–0.9 Ga) at the microcontinental blocks, ‘Caledonian’ (T_DM=1.1–0.55 Ga), ‘Hercynian’ (T_DM=0.8–0.5 Ma) and ‘Indosinian’ (T_DM=0.3 Ga) that coincide with coeval tectonic zones and formed at 570–475, 420–320 and 310–220 Ma. Continental crust of the microcontinents is underlain by, or intermixed with, ‘juvenile’ crust as evidenced by its isotopic heterogeneity. The continental crust of the Caledonian, Hercynian and Indosinian provinces is isotopically homogeneous and was produced from respective juvenile sources with addition of old crustal material in the island arcs or active continental margin environments. The crustal growth in the CAMB had episodic character and important crust-forming events took place in the Phanerozoic. Formation of the CAMB was connected with break up of the Rodinia supercontinent in consequence of creation of the South-Pacific hot superplume. Intraplate magmatism preceding and accompanying permanently other magmatic activity in the CAMB was caused by influence of the long-term South-Pacific plume or the Asian plume damping since the Devonian.     

Late Miocene movement within the Himalayan Main Central Thrust shear zone, Sikkim, north-east India

In the Sikkim region of north‐east India, the Main Central Thrust (MCT) juxtaposes high‐grade gneisses of the Greater Himalayan Crystallines over lower‐grade slates, phyllites and schists of the Lesser Himalaya Formation. Inverted metamorphism characterizes rocks that immediately underlie the thrust, and the large‐scale South Tibet Detachment System (STDS) bounds the northern side of the Greater Himalayan Crystallines. In situ Th–Pb monazite ages indicate that the MCT shear zone in the Sikkim region was active at c. 22, 14–15 and 12–10 Ma, whereas zircon and monazite ages from a slightly deformed horizon of a High Himalayan leucogranite within the STDS suggest normal slip activity at c. 17 and 14–15 Ma. Although average monazite ages decrease towards structurally lower levels of the MCT shear zone, individual results do not follow a progressive younging pattern. Lesser Himalaya sample KBP1062A records monazite crystallization from 11.5 ± 0.2 to 12.2 ± 0.1 Ma and peak conditions of 610 ± 25 °C and 7.5 ± 0.5 kbar, whereas, in the MCT shear zone rock CHG14103, monazite crystallized from 13.8 ± 0.5 to 11.9 ± 0.3 Ma at lower grade conditions of 525 ± 25 °C and 6 ± 1 kbar. The P–T–t results indicate that the shear zone experienced a complicated slip history, and have implications for the understanding of mid‐crustal extrusion and the role of out‐of‐sequence thrusts in convergent plate tectonic settings.     

Genesis of Kanggur Gold Deposit in Eastern Tianshan Orogenic Belt, NW China: Fluid Inclusion and Oxygen and Hydrogen Isotope Constraints

Abstract. Primary fluid inclusions in quartz and carbonates from the Kanggur gold deposit are dominated by aqueous inclusions, with subsidiary CO₂-H₂O inclusions that have a constant range in CO₂ content (10–20 vol %). Microthermometric results indicate that total homogenization temperatures have a wide but similar range for both aqueous inclusions (120 to 310C) and CO₂-H₂O inclusions (140 to 340C). Estimates of fluid salinity for CO₂-H₂O inclusions are quite restricted (5.9∼10.3 equiv. wt% NaCl), whereas aqueous inclusions show much wider salinity ranging from 2.2 to 15.6 equivalent wt %NaCl.
The 6D values of fluid inclusions in carbonates vary from -45 to -61 %, in well accord with the published δD values of fluid inclusions in quartz (-46 to -66 %). Most of the δ¹⁸O and δD values of the ore-forming fluids can be achieved by exchanged meteoric water after isotopic equilibration with wall rock by fluid/rock interaction at a low water/rock ratio. However, the exchanged meteoric water alone cannot explain the full range of δ¹⁸O and δD values, magmatic and/or meta-morphic water should also be involved. The wide salinity in aqueous inclusions may also result from mixing of meteoric water and magmatic and/or metamorphic water.     

Continental crustal growth and the supercontinental cycle: evidence from the Central Asian Orogenic Belt

Studies of supercontinental cycle are mainly concentrated on the assembly, breakup and dispersal of supercontinents, and studies of continental crustal growth largely on the growth and loss (recycling) of the crust. These two problems have long been studied separately from each other. The Paleozoic–Mesozoic granites in the Central Asian Orogenic Belt have commonly positive Nd values, implying large-scale continental crustal growth in the Phanerozoic. They coincided temporally and spatially with the Phanerozoic Pangea supercontinental cycle, and overlapped in space with the P-wave high-V anomalies and calculated positions of subducted slabs for the last 180 Ma, all this suggests that the Phanerozoic Laurasia supercontinental assembly was accompanied by large-scale continental crustal growth in central Asia. Based on these observations, this paper proposes that there may be close and original correlations between a supercontinental cycle, continental crustal growth and catastrophic slab avalanches in the mantle. In this model we suggest that rapid continental crustal growth occurred during supercontinent assembly, whereas during supercontinental breakup and dispersal new additions of the crust were balanced by losses, resulting in a steady state system. Supercontinental cycle and continental crustal growth are both governed by changing patterns of mantle convection.     

Tectonic and hydrodynamic control of landslides in the northern area of the Central Rif, Morocco

The northern edge of the Central Rif (Morocco) is subject to numerous landslides where mechanisms do not correspond to the classical models used by geomechanics specialists. It is necessary to adopt a multidisciplinary approach that combines geomorphology, geology, hydrogeology, and geotechnics in order to understand how such slope failures are generated, especially in a region with a heterogeneous structure characterised by significant lithological differences, severe fracturing, and thrust sheets where tectonic contacts play a major role in groundwater circulation. This report shows that these failures are essentially controlled by the tectonic contact separating the Tisirene and Chouamat thrust sheets and by subsurface hydrodynamic conditions. A model of spatial and temporal variations in the factor of safety is proposed.     

Curie-point depth from spectral analysis of magnetic data in central-southern Europe

The basal depth of the outer layer with internal magnetic sources was calculated from magnetic data available within a roughly 500 km wide and 1200 km long area, running from central Germany to southern Italy. The dataset, deriving from different aeromagnetic surveys, is reduced to the reference altitude of 3000 m a.s.l. and a reference year of 1980.0. The adopted method, which transforms the spatial data into the frequency domain, provides a relationship between the two-dimensional spectrum of the magnetic anomalies and the top and centroid depths of the magnetic sources. The magnetic layer bottom depth (MLBD) thus obtained is 29-33 km deep in the stable areas (central Europe Variscan units, Corsica-Sardinia Variscan block) and corresponds to the Moho, having an average temperature of 560 °C. From the Alps to the Apennines, MLBD ranges between 22 and 28 km and is clearly shallower than the Moho. In these units, the wide variation of MLBD appears to be compatible with the presence of shallow magnetised bodies, consisting of lower crustal rocks (Ivrea-Verbano zone), ophiolitic units (Penninic zone and Voltri Massif) and intrasedimentary basic volcanic bodies (Po Basin). An average value of 25 km can be attributed to MLBD, which corresponds to a temperature of 550 °C. In the peri-Tyrrhenian zone and the Ligurian Sea, MLBD is below the Moho, which ranges from 17 to 20 km depth, and it has a temperature matching approximately to the Curie temperature of magnetite (580 °C).     

Mesozoic-Cenozoic tectonic transition in Kuqa Depression-Tianshan, Northwest China: Evidence from sandstone detrital and geochemical records

Succeeding to multiply collisions of different blocks in Late Paleozoic[1―5], complex intracontinental structural deformation occurred in the Tianshan area during Mesozoic-Cenozoic[6―16], which controlled coeval basin-range evolution and resulted in intensive modi- fication and adjustment of the Paleozoic oil-gas reser- voirs[17―19]. The Kuqa Depression is a secendary struc- tural unit of the Tarim basin, in which Mesozoic- Ce- nozoic deposits occur in thickness of 6000―7000 m. The Kuq…