博格达山晚石炭纪造山活动的变形地质记录

主要由钙碱性火山岩、火山碎屑岩组成的博格达古岛弧是天山缝合造山带的重要组成部分 ,是一个发育较成熟的山链 ,其演化经历了晚古生代的韧性剪切收缩 ;中生代伸展调整及新生代再造山过程。晚古生代的造山活动在博格达山有很好的地质记录 ,并以显著的韧性剪切变形带的形成和发育同造山的褶皱构造为特点。剪切变形带内同构造的石英脉中的锆石U PbSHRIMP测年结果与山链中花岗岩、辉长岩年龄颇为一致 (311～ 316Ma) ,这个年龄反映在结束洋盆散聚、碰撞焊接的晚华力西期造山过程中 ,博格达古岛弧内存在一次虽不甚强烈 ,但又较为明显的构造岩浆事件 ,其成因可能与引起石炭纪大规模裂陆式喷发的深部断裂构造重新活动有关。     

粘弹性应力转移延迟了1999年赫克托矿地震的触发

在某些情况下,由地震引起的地壳应力转移可以加快邻近断层的破裂,并引起地震序列的发生(Stein,et al,1992;King,et al,1994;Deng and Sykes,1996;Harris,et al,1995;Stein,1999)。1999年南加州赫克托矿地震(震级7.1)在1992年兰德斯地震(震级7.3)的7年后,在距其震中仅20km处发生。这表明赫克托矿地震是以某种方式被     

一种典型的同生沉积型微细浸染型金矿床--桂西北高龙金矿床

桂西北高龙微细浸染型金矿床位于广西田林县高龙乡。含矿硅质岩与热水沉积作用有关，而非首人认为的断裂破碎—热液硅化交代岩。矿床的典型地质特征以及地球化学特征显示该矿床具有典型的同生沉积—准同生成岩的成因特征，矿床属同生沉积型，而不是前人认为的后生热液改造型。矿床的形成与右江沉积盆地演化关系密切，含矿流体为以大气降水为主要补给源的深循环盆地卤水和与沉积物发生了同位素交换的埋藏古海水，流体的运移方式以压实驱动流为主，含矿流体主要以沉积喷流方式成矿。     

再论印度—亚洲大陆碰撞的启动时间

利用沉积响应来识别印度－亚洲大陆碰撞启动时间是最直接和有效的方法之一。西藏仲巴错江顶群被甄别为碰撞型三角洲沉积，曲下组可能代表了碰撞启动时期的建造，藏南定日的海相白垩－古近系沉积演化，锶和碳同位素变化也支持两大陆碰撞启动时间大约在K／T界线时期，对比喜马拉雅西段碰撞启动时间并考虑大印度北缘失掉的宽度，提出两大陆量可能的碰撞启动时间是65Ma左右。     

最优化的矿物扩散地质速率计:北大别黄土岭麻粒岩缓慢冷却的证据

对北大别黄土岭麻粒岩中石榴子石进行了详细的电子探针工作，并根据一颗石榴子石的成分环带，建立了扩散模型并进行了数值模拟，结合最优化的方法，得到了极其缓慢的冷却速率0.1℃/a。从扩散动力学数值模拟的角度对大别山造山带的冷却速率进行了探索性研究。该结果表明，黄土岭麻粒岩在受麻粒岩相改造后经历的是一个极其缓慢、持续时间很长的冷却过程。     

Carboniferous Post-collisional Rift Volcanism of the Tianshan Mountains, Northwestern China

The Tianshan Carboniferous post-collisional rift volcanic rocks occur in northwestern China as a large igneous province. Based on petrogeochemical data, the Tianshan Carboniferous post-collisional rift basic lavas can be classified into two major magma types: (1) the low-Ti/Y type situated in the eastern-central Tianshan area, which exhibits low Ti/Y (<500), Ce/Yb (<15) and SiO2 (43-55%), and relatively high Fe2O3T (6.4-11.5%); (2) the high-Ti/Y type situated in the western Tianshan area, which has high Ti/Y (>500), Ce/Yb (>11) and SiO2 (49-55%), and relatively low Fe2O3T (5.8-7.8%). Elemental data suggest that chemical variations of the low-Ti/Y and high-Ti/Y lavas cannot be explained by fractional crystallization from a common parental magma. The Tianshan Carboniferous basic lavas originated most likely from an OIB-like asthenospheric mantle source (87Sr/86Sr(t) ≈ 0.703-0.705, εNd(t) ≈ +4 to +7). The crustal contamination and continental lithospheric mantle have also contributed significantly to the formation of the basic lavas of the Tianshan Carboniferous post-collisional rift. The silicic lavas were probably generated by partial melting of the crust. The data of this study show that spatial petrogeochemical variations exist in the Carboniferous post-collisional rift volcanics province in the Tianshan region. Occurrence of the thickest volcanics dominated by tholeiitic lavas may imply that the center of the mantle-melting anomaly (mantle plume) was in the eastern Tianshan area at that time. The basic volcanic magmas in the eastern Tianshan area were generated by a relatively high degree of partial melting of the mantle source around the spinel-garnet transition zone, whereas the alkaline basaltic lavas are of the dominant magma type in the western Tianshan area, which were generated by a low degree of partial melting of the mantle source within the stable garnet region, thus the basic lavas of the western Tianshan area might have resulted from relatively thick lithosphere and low geothermal gradient.     

Geological outline of the Alps

The Alps were developed from the Cretaceous onwards by subduction of a Mesozoic ocean and collision between the Adriatic (Austroalpine-Southalpine) and European (Penninic-Helvetic) continental margins.The Austroalpine-Penninic wedge is the core of the collisional belt, a fossil subduction complex which floats on the European lower plate. It consists of continental and minor oceanic nappes and is marked by a blueschist-to-eclogite-facies imprint of Cretaceous-Eocene age, followed by a Barrovian overprint. The collisional wedge was later accreted by the Helvetic basement and cover units and indented by the Southalpine lithosphere, which in turn was deformed as an antithetic fold-and-thrust belt.     

丽江地震前后重力场变化的有限矩形位错模型分析

研究了用有限矩形位错模型计算地壳形变引起的地面重力场变化的方法．以丽江MＳ7.0地震为例，讨论了确定用于模型计算的断层面参数的原则，并给出了结果．计算和分析了不同类型位错引起的重力场变化图象特征，并与丽江地震前后观测到的重力场变化进行比较．结果表明，在发震断层有限范围内模型可解释同震重力场的变化，但模型对于更大空间范围上的重力场变化并不能给出很好地解释.      

应力驱动的大陆碰撞作用：综合齿状构造作用和地幔俯冲构造作用

利用一种模式可能综合两种端员模式种类。这两种端员模式已经用于解释大陆碰撞期间地壳变形作用的模型，这种模式包括了来自侧翼的锯齿模式以及来自于下伏的俯冲层段的底部力作用。     

长乐-南澳韧性剪切带走滑特征探讨

长乐-南澳韧性剪切带可能是在碰撞造山缝合带基础上发育的,其走滑特性严格受闽台微大陆与闽浙中生代火山弧碰撞过程中碰撞动力学的制约。岩石韧性组构和糜棱岩变形的微构造研究表明,碰撞前期走滑为左行。在早垩世晚期(100-120Ma)的主碰撞期和以伸展作用为主的碰撞后期,该带以右行为主,这种右行走滑一直持续至今。发育韧性剪切带的闽台微大陆(或称平潭-东山带)原始位置可能比现今更靠南,这是属于几百公里的漂移位移而不是剪切位移。