甲醛前处理对提取海带褐藻胶质与量的影响

褐藻胶(Na-alginate)工业在国外已有半个多世纪的历史,其工艺流程及生产设备等都日趋标准化,产品的种类及其在工业上的用途也走向多样化。我国在五十年代初期曾呈奎和纪明侯就用野生的马尾藻作为原料进行了褐藻胶的提取研究,井确立了褐藻胶的生产工艺,从而诞生了我国的褐藻胶工业。六十年代以来,由于海带的大量人工栽培，褐藻胶生产便采用海带作为原料,由此,这个新兴工业迅猛发展。目前,中国的褐藻胶生产的规模和产量在世界上已名列前矛,除了主产品褐藻胶以外,还同时生产甘露醇、碘等联产品。但这个工业还存在不少问题,特別是褐藻胶的粘度、透明度及色泽等质量指标是人们极为关切的问题。本文拟就海藻原料的前处理工艺对胶的质量和产量的影响做一系统的研究。     

新疆与哈萨克斯坦寒武纪磷块岩资源

新疆和哈萨克斯坦寒武纪均为主要的磷矿成矿时代之一,但所形成的磷块岩资源量差别巨大．新疆寒武纪磷块岩矿层薄、矿石质量差、储量很少,哈萨克斯坦小卡拉套山寒武纪磷块岩矿层厚度大、矿石质量好、储量巨大．从实施“走出去”战略出发,邻国小卡拉套地区丰富的磷矿资源对于弥补新疆磷矿资源的严重不足具有重要意义．     

A New Female Cone, Araucaria beipoiaoensis sp. nov. from the Middle Jurassic Tiaojishan Formation, Beipiao, Western Liaoning, China and Its Evolutionary Significance

A new species of Araucaria, Araucaria beipiaoensis sp. nov., collected from the Middle Jurassic Tiaojishan Formation, southern hill of Shebudai village, near Beipiao city, western Liaoning is based on a permineralized female cone, which is ovate to elliptical in shape, about 11 cm × 7 cm × 4.5 cm in size. The cone bears rhomboid bracts that are spirally attached, texture thicker, with wings on both sides, with a detached lamina-like apex at the tip. In inner structure the ovuliferous scales are thicker and fused with bracts at the end with a ligular sulcns. There is one wingless ovule/seed per seed-scale complex embedded in the ovuliferous scale tissue, with the micropyle directed toward the cone axis. The ovules/seeds are long ovate or elliptical in shape, 1 cm long and near the base about 3 mm in diameter; the ovule/seed integuments have begun differentiation into 3 layers： the sarcotesta, sclerotesta, and endotesta. The nucellus is free from the enclosing integuments except in the chalazal region where it is fused to the inner layer （endotesta） of integument. Some ovules show cellularized nucellar tissue. Mature seeds exhibit the papery-thin wavy nucellus characteristically near to the micropyle. The embryonic tissue appears to be four cotyledons. The morphology and structure of the cone shows a close relationship to the araucarian cones of fossil and living genera but differs from any known species. The new species is distributed in the Middle Jurassic of the northern hemisphere, especially Asia, and has important significance for the evolution of the Family Araucariaceae.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

再论南岭侏罗纪“铝质”A型花岗岩的成因及其对古地温线的制约

对南岭地区侏罗纪4个典型"铝质"A型花岗岩岩基——柯树北、寨背、西山和南昆山的成因分析表明:柯树北、寨背岩基中的低分异花岗岩SiO2≈70%,A/CNK<1.1,CaO≥1%,高Zr、Ba含量,是下地壳部分熔融产物;而SiO2含量较高者由低分异花岗岩岩浆通过分离结晶演化而来。西山花岗质火山-侵入杂岩也是下地壳部分熔融产物。南昆山花岗岩为高硅花岗岩,贫Zr、低Ba、Sr和Eu/Eu*值,但具有高的Nb、Ga、REE含量和Ga/Al比值,在Whalen等(1987)图解中地球化学参数落在A型花岗岩区域内。碱性玄武岩浆分离结晶的成岩模式无法解释南昆山岩基较大的体积、均一的成分和低的Nb/Ta比值。详细的成岩分析表明,南昆山花岗岩可能是先期侵入的(幔源)碱性正长岩在富水和相对低温低压条件下发生部分熔融的产物。由这些"铝质"A型花岗岩的熔融温压条件估算得出热流值达到80~95mWm-2的南岭地区侏罗纪古地温线。由古地温线推算出的岩石圈厚度45~75km。南岭侏罗纪高热流背景及其对应的花岗质岩浆活动可能与后碰撞造山阶段岩石圈地幔拆沉或被"热侵蚀"有关,但并不一定意味着岩石圈伸展的大地构造环境。     

华北克拉通破坏前的状态——对讨论华北克拉通破坏问题的一个建议

中生代华北克拉通破坏是目前引人关注的研究课题。鉴于目前一些文章在表达克拉通状态时引用的地质图件不准确,忽略了华北克拉通从古至今的不同阶段的演化,不能正确的表达克拉通在破坏之前或之后的状态,本文强调华北克拉通破坏前的状态是研究的重要基础。华北克拉通是经历过多期克拉通化形成的。     

岩石圈中热压系数的计算

中国中西部地区发育众多前陆冲断带,它们具有构造变形复杂、油气潜力大和有别于经典前陆盆地的沉积和油气地质特征,但其成因过程和动力学并不清楚。文中利用中西部盆地区的地温、岩石热物性参数和地热学模拟技术,分析该区岩石圈热状态和流变学特征,进一步结合其他地质、地球物理资料,揭示盆地区的深部构造特征和岩石圈性质。研究表明,中西部各主要盆地的岩石圈具有厚度大、强度高、地温低等热-流变学特征,表现为刚硬块体;而其周缘和造山带区却表现为温度高、强度低和厚度小等特征,是构造变形的易发区。在此基础上讨论了岩石圈性质和变形过程等深部构造对前陆盆地成因演化的控制作用,进而初步归纳这类陆内再生前陆盆地的成因演化机制:发育于小型克拉通块体的边缘,其就位受控于岩石圈热-流变学非均质性和构造继承性,其动力来源是新生代印度-欧亚大陆碰撞及其持续的挤压作用。上述研究为探讨中国中西部地区的前陆盆地成因机制提供了深部资料和岩石圈热-流变学约束。     

准噶尔盆地西北缘走滑断层特征及油气地质意义

准噶尔盆地西北缘前陆冲断带构造样式复杂多样,除规模较大的逆断层外,还发育一系列北西向的走滑断层。以高分辨率三维地震资料为基础,对断裂体系分析表明克拉玛依—百口泉地区的走滑断层可分为花状走滑断层和简单走滑断层两类,二者在成因、剖面特征等方面具有明显差别。研究结果认为走滑断层对油气的运聚成藏具有重要的双重控制作用,即能作为有效的运移通道,又能够起遮挡作用而形成圈闭。