Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

Factors involved in growth plasticity of cockles Cerastoderma edule (L.), identified by field survey and transplant experiments

In Arcachon Bay, a macrotidal coastal lagoon in southwest France, growth rates of cockles Cerastoderma edule (L.) differ greatly between locations. Sampling of populations at different tidal levels showed that the mean shell length was significantly and positively correlated with immersion time, whereas no correlation was found with population density and microphytobenthos biomass. Transplants of cockles between two intertidal sites were used to examine the relative importance of habitat and site of origin for growth rate and condition index. Artifacts due to manipulation were assessed, i.e. the impact of enclosures on growth, conditon index and mortality. During a 5-mo reciprocal transplant experiment, growth rates of the transplanted cockles and the cockles already present were similar, whereas the sites of origin did not affect growth rate. Condition index, however, displayed significant differences in relation to both transplant and origin sites. During a further 6-mo experiment in which cockles were transplanted from one site to four new sites, growth was mainly influenced by tidal level. These results indicate that net growth started when cockles were immersed 30% of the time. It is concluded that, on the scale of Arcachon Bay (156 km²), differences in growth and condition between cockle populations are largely phenotypic. Tidal level (i.e. food supply and emersion stress) accounts for most of these differences, but the existence of genetically or physiologically different populations cannot be excluded.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

琼胶降解菌F-6筛选、培养条件及对条斑紫菜(Porphyra yezoensis)细胞解离作用的研究

利用琼胶作为唯一的碳源从青岛太平角海域的海水和红藻样品中筛选分离得到一株高产琼胶酶的海洋菌F-6,对其最适的产酶条件,利用琼胶酶分离条斑紫菜的原生质体和原生质体的培养进行研究。结果表明,通过单次单因子和正交实验确定琼胶降解菌株F-6最适产酶培养基配方为(W/V):琼胶0.7%;酵母粉0.3%;蛋白胨0.5%;NaCl2.0%;K2HPO40.1%;CaCl20.02%;MgSO4·7H2O0.05%;FeSO4·7H2O0.002%;起始pH=7.5,最适的发酵产酶条件为:26℃培养36h。经条件优化后,粗酶液的酶活高达631.6U/ml。发酵液经过6000g离心30min得到粗酶液,粗酶液经过8k分离膜超滤,加入1mol/L渗透剂,0.22μm滤膜过滤除菌后降解条斑紫菜组织块,成功地分离得到大量的紫菜原生质体,其产率为3×106个原生质体/g新鲜紫菜组织。原生质体经初步培养发育成愈伤组织,其成活率为60%。     

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

关于多项式特征值的条件数

Tisseur(2000)研究了非齐次多项式特征值问题的条件数，所得结果的不足是对无穷特征值必须另外处理；Declieu和Tisseur(2003)运用微分几何方法研究了齐次多项式特征值问题的条件数，所得结果的不足之处是与系数矩阵的尺度化(scaling)有关。这两种条件数都有各自的应用范围。本文基于投影尺度引入齐次多项式特征值问题的条件数，其优点是与系数矩阵的尺度化无关，因而也许会有较广泛的应用。     

产复合酶菌株Pseudomonas sp.NJ197产酶发酵条件的研究

从南极普利兹湾深海900m的沉积物中筛选到一株同时产多种低温复合酶的菌 株NJ197,作者对其进行碳源、氮源、无机盐、起始pH值、培养时间、接种量等发酵条 件的优化实验．实验结果证明,在以0．5％可溶性淀粉为碳源,以0．5％豆饼粉为氮 源,无机盐:0．424％NH4H2PO4、0．075％K2HPO4、0．02％MgSO4、0．5％CaCO3,起始 pH值8．5,接种36h种龄的种子10％,20℃、250r／min的条件下在旋转摇床中培养 72h,产复合酶菌株产脂肪酶和淀粉酶活性最高．最佳的生理条件下复合酶中的碱性 脂肪酶和淀粉酶的产量分别提高到22．4U／cm3和30．9U／cm3,该产复合酶菌株可以 作为诱变育种、基因工程菌改造的出发菌株,在洗涤和制革工业中有良好的应用前 景．