粉细砂地层防渗帷幕综合施工方法

四川省武都水库右岸EL574 m灌浆平洞揭露出厚度2.3～9.8 m的粉细砂层,普通水泥高压灌浆无法形成可靠的防渗帷幕。采用高压旋喷、湿磨细水泥、化学灌浆的组合处理方式,取得了较好的施工效果。通过钻孔压水、大功率声波CT、单孔声波、钻孔全景数字成像等方法检测,表明达到了设计防渗要求。     

氢化物发生—原子荧光光谱法快速测定粉煤灰中微量硒

随着环境科学与人体健康研究的深入,硒作为人体必需的15种微量元素之一,尤为科技工作者所重视。硒属于一种稀散微量元素,主要用于电子和电器工业以及导弹,高空通讯设备等。在半导体﹑橡胶﹑石油工业中,硒也有着广泛的用途。人体硒水平偏低,可致老年期衰减速度加快,合理地补充硒可以预防和治疗心血管疾病,增强体液的免疫力,并能有效地防止肿瘤的扩展,起到预防和治疗癌症的作用。本文应用专属性强的AFS方法分析证实,对测定粉煤灰中的硒,具有简单快速﹑准确灵敏、取样量少、测定范围宽等优点。其加标回收率在:90.0%~101.0%之间,RSD为:3.36%~6.02%。     

浅论高精度DEM的制作

结合地理国情普查DEM精细化生产项目,论述了基于ArcGIS 10.1、ERDAS 2011软件,批量生产高精度DEM的工艺流程及作业过程中关键性技术问题的解决.     

Experimental study of the effects of non-uniformly distributed fine soil on mechanical properties of Shenyang–Dandong Railway coarse-grained soil

The stress produced by repeated train loads decreases with increasing railway subgrade bed depth, and slightly weathered coarse particles of subgrade bed fillings can be broken at different levels under continuous load. Thus, the mass of fine soil, with a diameter of not more than 0.075 mm, is different at different depths. Fine soil is also sensitive to frost heave and thaw settlement. In order to study the effects of non-uniformly distributed fine soil on the mechanical properties of coarse-grained soil of the Shenyang-Dandong Railway, triaxial tests were conducted with three types of specimens, undergoing six freeze-thaw cycle numbers(0, 1, 3, 7, 9, 12) and three confining pressures(100, 200, 300 k Pa). The freezing temperature is-5 °C and the thawing temperature is +15 °C. The stress-strain behavior, static strength, resilient modulus, cohesive force and the angle of internal friction were measured for different tested specimens. As a result, the law of static strength and resilient modulus of different specimens following the increase of freeze-thaw cycles under three confining pressures is obtained. The changing law of cohesive force and friction angle of three specimens following the increase of freeze-thaw cycles is also calculated, and the different results of different specimens are also compared.     

日冕磁场和重联的射电信号

总结了近期用射电频谱仪（高时间和高频谱分辨）和野边山射电日像仪（高空间分辨）以及国内外其它空间和地面设备分析日冕磁场和重联的系列工作。主要结论可归纳为：1）在Dulk等人（1982）的近似下自恰计算射电爆发源区磁场的平行和垂直分量，并首次得到该磁场在日面的两雏分布。2）为了考虑非热电子低能截止的影响，必须采用更严格的回旋同步辐射理论来计算。结果表明：低能截止和日冕磁场对计算有明显的影响，而其它参数（包括背景温度、密度、高能截止和辐射方向）的影响均可忽略。因此，对低能截止和日冕磁场必须联立求解。3）射电爆发中的精细结构可能反映了射电爆发源比较靠近粒子加速（磁场重联）的区域，利用高时间和高频率分辨的频谱仪和高空间分辨的日像仪联合分析，可以确定精细结构的源区位置，从而确定粒子加速（磁场重联）的准确时间和地点。     

Effects of Volcanic Ash on Computers and Electronic Equipment

Computers and electronic equipment are an important component of the infrastructure of our modern environment. It is therefore essential that we know the effects of volcanic ash on such equipment. This paper presents the results of a pilot study to test computers and cooling fans in an ash-charged environment to assess their vulnerability. In the experiment, ash was poured on to computers and cooling fans in a sealed 0.216 m³ perspex box, with the effects on both the ash and the equipment monitored. Three different types of ash (1996 Ruapehu andesitic ash, Sakurajima andesitic ash and Kaharoa rhyolitic ash) were used in the experiments.In the first experiment each type of ash was photographed by Scanning Electron Microscope (SEM), then passed through the bearing unit of a cooling fan and photographed again afterwards. The bearings within the cooling fan continued to work even after 720 h of testing and there was no significant abrasion of the fan-shaft bearing. The ash was however fragmented, suggesting that the brittle ash shattered to fine dust, which caused significantly less abrasion to the bearings or shaft than expected. Three computers were then tested in the sealed box. Ash was introduced at increasing rates to simulate catastrophic entry of ash into a work environment, and computers were tested throughout using the BURNIN^® testing programme. Failure times ranged from 100 to 150 h; most failures occurring when humidity was increased by spraying water mist into the airflow. If dried out the computers continued to operate again if failure was not catastrophic. Card slot edge connectors proved to be one of the weakest links, as a bridge of ash formed across the gap. They were also subject to abrasion with some of the gold plating being removed. This did not however cause operating difficulties.The conclusions are that computers are more resilient than originally thought, unless the ash is moist. Simple low-tech procedures should be adequate to protect computers from small amounts of dry and moist ash contamination.     

Surface area, porosity and water adsorption properties of fine volcanic ash particles

Our understanding on how ash particles in volcanic plumes react with coexisting gases and aerosols is still rudimentary, despite the importance of these reactions in influencing the chemistry and dynamics of a plume. In this study, six samples of fine ash (<100 m) from different volcanoes were measured for their specific surface area, a_s, porosity and water adsorption properties with the aim to provide insights into the capacity of silicate ash particles to react with gases, including water vapour. To do so, we performed high-resolution nitrogen and water vapour adsorption/desorption experiments at 77 K and 303 K, respectively. The nitrogen data indicated a_s values in the range 1.1–2.1 m²/g, except in one case where a a_s of 10 m²/g was measured. This high value is attributed to incorporation of hydrothermal phases, such as clay minerals, in the ash surface composition. The data also revealed that the ash samples are essentially non-porous, or have a porosity dominated by macropores with widths >500 Å. All the specimens had similar pore size distributions, with a small peak centered around 50 Å. These findings suggest that fine ash particles have relatively undifferentiated surface textures, irrespective of the chemical composition and eruption type. Adsorption isotherms for water vapour revealed that the capacity of the ash samples for water adsorption is systematically larger than predicted from the nitrogen adsorption a_s values. Enhanced reactivity of the ash surface towards water may result from (i) hydration of bulk ash constituents; (ii) hydration of surface compounds; and/or (iii) hydroxylation of the surface of the ash. The later mechanism may lead to irreversible retention of water. Based on these experiments, we predict that volcanic ash is covered by a complete monolayer of water under ambient atmospheric conditions. In addition, capillary condensation within ash pores should allow for deposition of condensed water on to ash particles before water reaches saturation in the plume. The total mass of water vapour retained by 1 g of fine ash at 0.95 relative water vapour pressure is calculated to be ~10^–2 g. Some volcanic implications of this study are discussed.Editorial responsibility: J. Gilbert     

精品期刊构成要素分析--兼谈《课堂内外》小学版的编辑实践

对精品期刊构成要素进行了分析,提出“培育精品以质量求生存,借助媒体以广告促发展的办刊思想。”分析了《课堂内外》小学版办刊中遇到的具体问题,指出了培育精品期刊的努力方向。     

Arsenic Speciation in Lichens and in Coarse and Fine Airborne Particulate Matter by HPLC–UV–HG–AFS

A three-step sequential extraction procedure with Milli-Q, CaCl₂ and H₃PO₄ was applied for extraction of arsenic species in lichen transplants and airborne particulate matter (fine and coarse fractions). The samples used in this work were collected in 1994–1995 near coal-fired power plants. Both transplant lichens and airborne particulate matter were submitted to the same environment simultaneously. Arsenic species identification and quantification was performed by HPLC–UV–HG–AFS. Inorganic forms of arsenic (arsenite and arsenate) were present in significant amounts in most of the samples. Only in lichens also organic forms of arsenic (monomethyl arsonic acid and dimethyl arsinic acid) were identified which may indicate biotransformation of inorganic arsenic.