The methods used for a building seismic hazard evaluation are presented with the associated results. The goals of the study are (1) to check the soil nature and the existence or not of a possible site effect around the installation and (2) to characterize the dynamic behavior of the building using ambient vibration records.
The results of the soil study with the Nakamura method are very difficult to interpret because they are not stable in space and time. The spectral ratios method has been used with regional earthquake records. The results of the application of this method allowed us to conclude that the installation was free of site effect.
The ambient vibration measurements on the building brought the conclusion to determine the first and second modes of the structure. These results have been used to calibrate numerical model. The modal shapes in plan (high roof) and in elevation (main column) have been evaluated. The damping of the building has been computed using ambient vibration records. 相似文献
This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.
For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed. 相似文献
A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys. 相似文献
The site amplification is estimated at five seismic stations of the Latur region using the horizontal to vertical spectral ratios of 33 aftershocks of the main Killari earthquake of September 29, 1993 (UTC). Spectral amplifications, ranging from a factor of 2–6 are found to vary with frequency at different places. Significant amplification is found at four sites within the Latur region, at Basavakalyan, Kasgi, Killari, and Mudgad Eakoji villages. Our results show a positive correlation between the site amplification and the damage pattern in area. The pattern and the nature of the site amplification estimated in the present study corroborates also with the analytical models and the borehole data indicating alternating layers of unconsolidated sediments and basaltic rocks. 相似文献
The downhole vertical accelerometer array VSAP near Paducah, KY, consists of three-component accelerometers at the surface, the top of the McNairy Formation (−41 m), and the top of the Paleozoic bedrock (—99 m). The array is at the northern end of the Mississippi Embayment, and it was installed to verify the ground-motion modeling for the site, assuming a significant earthquake in the New Madrid Seismic Zone. Accelerograms from 4.2 and 2.0 mb earthquakes were used to check aspects of the modeling pertaining to linear behavior of the soil column, and to review the soil column models derived by drilling and geotechnical methods and through the use of high-resolution P- and SH-wave seismic refraction in reflection techniques. Results of the study indicate that for the linear case the soil column models derived by the two techniques are equivalent, and that the most important boundary in the soil column, with respect to amplification of the ground motions, is the interface between the limestone bedrock and soil. 相似文献
— For the realistic modeling of the seismic ground motion in lateral heterogeneous anelastic media, the database of 3-D geophysical structures for Beijing City has been built up to model the seismic ground motion in the City, caused by the 1976 Tangshan and the 1998 Zhangbei earthquakes. The hybrid method, which combines the modal summation and the finite-difference algorithms, is used in the simulation. The modeling of the seismic ground motion, for both the Tangshan and the Zhangbei earthquakes, shows that the thick Quaternary sedimentary cover amplifies the peak values and increases the duration of the seismic ground motion in the northwestern part of the City. Therefore the thickness of the Quaternary sediments in Beijing City is the key factor controling the local ground effects. Four zones are defined on the base of the different thickness of the Quaternary sediments. The response spectra for each zone are computed, indicating that peak spectral values as high as 0.1 g are compatible with past seismicity and can be well exceeded if an event similar to the 1697 Sanhe-Pinggu occurs. 相似文献
Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the Vs velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of Vs profiles reached a depth of 320 m. Comparisons with Vs values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the Vs profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein. 相似文献