Experimental validation of a signal-based approach for structural earthquake damage detection using fractal dimension of time frequency feature

This article extends a signal-based approach formerly proposed by the authors, which utilizes the fractal dimension of time frequency feature(FDTFF) of displacements, for earthquake damage detection of moment resist frame(MRF), and validates the approach with shaking table tests. The time frequency feature(TFF) of the relative displacement at measured story is defined as the real part of the coefficients of the analytical wavelet transform. The fractal dimension(FD) is to quantify the TFF within the fundamental frequency band using box counting method. It is verified that the FDTFFs at all stories of the linear MRF are identical with the help of static condensation method and modal superposition principle, while the FDTFFs at the stories with localized nonlinearities due to damage will be different from those at the stories without nonlinearities using the reverse-path methodology. By comparing the FDTFFs of displacements at measured stories in a structure, the damage-induced nonlinearity of the structure under strong ground motion can be detected and localized. Finally shaking table experiments on a 1:8 scale sixteen-story three-bay steel MRF with added frictional dampers, which generate local nonlinearities, are conducted to validate the approach.     

Earthquake response of asymmetric building with MR damper

Plan asymmetric buildings are very susceptible to earthquake induced damage due to lateral torsional coupling, and the corners of these systems suffer heavy damage during earthquakes. Therefore, it is important to investigate the seismic behavior of an asymmetric plan building with MR dampers. In this study, the effectiveness of MR damper-based control systems has been investigated for seismic hazard mitigation of a plan asymmetric building. Furthermore, the infl uence of the building parameters and damper command voltage on the control performance is examined through parametric study. The building parameters chosen are eccentricity ratio and frequency ratio. The results show that the MR damper-based control systems are effective for plan asymmetric systems.     

宿迁市建设大厦消能减震设计

宿迁市建设大厦,21层,框架-抗震墙结构,按Ⅷ度(0．3g)进行抗震设防;由于建筑部分楼层层间位移超过《规范》要求,因此在部分楼层增设消能支撑,通过提高结构的附加阻尼比来降低结构的位移反应。整体结构的非线性时程分析结果表明,在框架-抗震墙结构中增设消能支撑,可以较为经济地控制结构薄弱层的位移,提高结构的抗震安全储备。本文可为高烈度区类似工程的设计提供借鉴。     

带TMD的结构基于动力可靠性约束的优化设计

本文在运用复模态法求得多自由度带TMD结构随机地震响应解析解的基础上．采用基于动力可靠性约束的优化设计方法对TMD装置参数的优化取值进行了系统研究,以结构最大位移响应的期望值为目标函数,以TMD装置响应的动力可靠性为约束条件,运用罚函数法获得到TMD装置的优化设计参数．并给出了算例,从而建立了带TMD结构基于动力可靠性约束的抗震优化设计的一整套方法,本文方法也可用于基础隔震结构、带TLD减震结构以及带TMD和TLD抗风结构的优化设计。     

多维地震作用下偏心结构的磁流变阻尼器半主动控制

理论研究与震害经验表明,地震时结构会产生不可忽略的平动与扭转耦合的空间振动。本文提出了基于线性最优控制理论的部分状态反馈次优控制策略和基于遗传算法的控制策略,以Marlab和Simulink为平台,采用磁流变阻尼器对双向水平地震作用下的偏心结构平．扭耦联反应进行半主动控制。对-6层双向偏心框架结构进行控制效果仿真分析的结果证明,本文提出的2种控制策略是有效的。     

Seismic response control of a complex structure using multiple MR dampers： experimental investigation

This paper presents an experimental investigation on semi-active seismic response control of a multistory building with a podium structure using multiple magnetorheological (MR) dampers manipulated by a logic control algorithm. The experiments are performed in three phases on a seismic simulator with a slender 12-story building model representing a multi-story building and a relatively stiff 3-story building model typifying a podium structure. The first phase of the investigation is to assess control performance of using three MR dampers to link the 3-story building to the 12-story building, in which seismic responses of the controlled two buildings are compared with those of the two buildings without any connection and with rigid connection. The second phase is to investigate reliability of the semi-active control system and robustness of the logic control algorithm when 2 out of 3 MR dampers fail and when the electricity supply to MR dampers is completely stopped. The last phase is to examine sensitivity of semi-active control performance of two buildings to change in ground excitation. The experimental results show that multiple MR dampers with the logic control algorithm can achieve a significant reduction in seismic responses of both buildings. The proposed semi-active control system is of high reliability and good robustness.     

漂浮体系悬索桥拟静态纵向运动特性及其控制

营运状况下漂浮体系悬索桥加劲梁纵向运动产生的过大累积行程会引起伸缩缝和塔梁纵向阻尼器等连接构件的性能退化和疲劳损坏.探索加劲梁纵向运动过大累积行程的成因,并找出降低累积行程的控制措施是确保悬索桥健康运营的关键.首先,以江阴长江大桥实测位移时程数据为基础,对不同频谱特性的位移成分进行分解,并统计了不同位移成分的循环次数和...     

基于H∞理论的磁流变阻尼器半主动容错控制

建筑结构的半主动控制系统中的传感器,在强震作用下可能因出现故障而影响控制效果。以磁流变阻尼器为例,研究半主动容错控制系统的设计方法。首先,研究了基于状态观测器的半主动H∞控制器设计方法,并将之应用到建筑结构采用磁流变阻尼器的减振控制中;运用改进Bouc-Wen模型,计算磁流变阻尼器的阻尼力,通过求解一个代数Riccati方程和一个状态观测方程,得出了基于状态观测器的H∞主动控制律;再对其采用Clipped-optimal方法实施半主动控制策略。然后,针对传感器故障,利用观测器组的输出残差对故障进行在线诊断,并通过几个观测器状态值的比较得到故障的大小,并据此对传感器的测量值进行修正,从而消除故障对闭环系统的影响,最终实现半主动H∞容错控制。仿真结果表明,该方法具有很好的容错控制效果。     

新型开孔H型钢阻尼器有限元分析

设计了分别开椭圆形孔和菱形孔的2种新型H型钢耗能器,阐述了它们的构造与耗能原理。采用有限元软件ABAQUS对开椭圆形孔、菱形孔和条形孔这3种新型耗能器的耗能性能进行数值分析,研究了开孔形状、肢宽与肢高等参数对新型耗能器耗能性能的影响。分析结果表明：新型H型钢耗能器具有饱满的滞回曲线,屈服位移较小、耗能性能稳定,耗能器的屈服位移、初始刚度和等效阻尼比随各肢钢板宽度增大（或高度减小）而增大;在开孔率相近或者肢宽相同的情况下,菱形孔H型钢耗能器的等效阻尼比要比条形孔和椭圆形孔的大,且应力分布更加均匀。     

不同构造参数对圆环耗能器性能的影响分析

设计了13组不同构造参数的圆环耗能器,采用ABAQUS软件对安装在支撑框架结构中的圆环耗能器进行参数分析,研究圆环钢板厚度、圆环外直径、支撑角度、圆环钢板局部削弱形式和削弱深度对圆环耗能器性能的影响。研究结果表明：圆环耗能器滞回曲线稳定、饱满,塑性耗能能力强;随着圆环钢板厚度的增加或者圆环外直径的减小,圆环耗能器初始刚度和屈服力增大;支撑与横梁之间的角度对圆环耗能器性能有一定影响,交叉支撑角度宜取45°左右;圆环钢板局部削弱圆环耗能器比不削弱圆环耗能器具有更好的耗能效果;圆环钢板局部削弱形式宜采用圆弧式,且钢板削弱深度宜控制在圆环钢板宽度的20%~30%。