山东省9216号强热带气旋风暴期间的海岸侵蚀灾害

本文比较详细地报导了山东省沿岸在９２１６号强热带气旋风暴潮期间的海岸侵蚀灾害情况，分析了灾害的形成原因、特点。最后讨论了与之有关的问题。     

好望角附近海域春季大风的几种主要形势分析

通过普查和分析，概括出了春季好望角附近海域三种主要大风出现时的模型图，并以一个月中逐日4次船舶测风报告为例，分析了好望角大风的某些主要特征。     

台风"杜鹃"影响期间福建大风天气的特点及成因

台风“杜鹃”影响期间，福建大风天气出现的比较早，而且范围比较大．本文通过对天气尺度的环境场、具有代表性的单站资料的对比分析，寻求大风出现的原因．还深入利用MM5模式对台风的气压场、风场、流场等进行数值模拟，分析结果表明台湾地形倒槽的形成对此次大风天气出现有着重要的作用，此外从流场分型的角度进一步分析台湾地形倒槽的形成原因．     

基于强跟踪性能的QEKF组合导航自适应滤波研究

以低成本陆用航姿参考系统（AHRS）/GPS紧耦合系统为研究对象,建立了基于伪距、伪距率、航向角的组合观测数学模型。引入强跟踪滤波（STF）算法,利用渐消因子的作用,增强滤波器对状态快速变化的跟踪能力。同时,针对微惯性器件漂移过大的缺点,采用二阶EKF（QEKF）方法,通过对Hessian矩阵的求解,补偿系统观测方程线性化的二阶截断误差。仿真表明：STQEKF方法可高速准确地逼近系统非线性模型,实现陆地载体导航控制,在传感器精度有限的情况下,使姿态和位置的控制效果较标准EKF分别提高了约8.9%-38.2%和48.7%-54.4%     

Hybrid seismic modeling based on discrete-wave number and finite-difference methods

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.     

Bayesian estimation of seismic hazard for two sites in Switzerland

Seismic hazard analysis is based on data and models, which both are imprecise and uncertain. Especially the interpretation of historical information into earthquake parameters, e.g. earthquake size and location, yields ambiguous and imprecise data. Models based on probability distributions have been developed in order to quantify and represent these uncertainties. Nevertheless, the majority of the procedures applied in seismic hazard assessment do not take into account these uncertainties, nor do they show the variance of the results. Therefore, a procedure based on Bayesian statistics was developed to estimate return periods for different ground motion intensities (MSK scale).Bayesian techniques provide a mathematical model to estimate the distribution of random variables in presence of uncertainties. The developed method estimates the probability distribution of the number of occurrences in a Poisson process described by the parameter . The input data are the historical occurrences of intensities for a particular site, represented by a discrete probability distribution for each earthquake. The calculation of these historical occurrences requires a careful preparation of all input parameters, i.e. a modelling of their uncertainties. The obtained results show that the variance of the recurrence rate is smaller in regions with higher seismic activity than in less active regions. It can also be demonstrated that long return periods cannot be estimated with confidence, because the time period of observation is too short. This indicates that the long return periods obtained by seismic source methods only reflects the delineated seismic sources and the chosen earthquake size distribution law.     

Some comparisons between mining-induced and laboratory earthquakes

Although laboratory stick-slip friction experiments have long been regarded as analogs to natural crustal earthquakes, the potential use of laboratory results for understanding the earthquake source mechanism has not been fully exploited because of essential difficulties in relating seismographic data to measurements made in the controlled laboratory environment. Mining-induced earthquakes, however, provide a means of calibrating the seismic data in terms of laboratory results because, in contrast to natural earthquakes, the causative forces as well as the hypocentral conditions are known. A comparison of stick-slip friction events in a large granite sample with mining-induced earthquakes in South Africa and Canada indicates both similarities and differences between the two phenomena. The physics of unstable fault slip appears to be largely the same for both types of events. For example, both laboratory and mining-induced earthquakes have very low seismic efficiencies where _a is the apparent stress and is the average stress acting on the fault plane to cause slip; nearly all of the energy released by faulting is consumed in overcoming friction. In more detail, the mining-induced earthquakes differ from the laboratory events in the behavior of as a function of seismic momentM ₀. Whereas for the laboratory events 0.06 independent ofM ₀, depends quite strongly onM ₀ for each set of induced earthquakes, with 0.06 serving, apparently, as an upper bound. It seems most likely that this observed scaling difference is due to variations in slip distribution over the fault plane. In the laboratory, a stick-slip event entails homogeneous slip over a fault of fixed area. For each set of induced earthquakes, the fault area appears to be approximately fixed but the slip is inhomogeneous due presumably to barriers (zones of no slip) distributed over the fault plane; at constant , larger events correspond to larger _a as a consequence of fewer barriers to slip. If the inequality _a / 0.06 has general validity, then measurements of _a =µE _a /M ₀, where is the modulus of rigidity andE _a is the seismically-radiated energy, can be used to infer the absolute level of deviatoric stress at the hypocenter.     

Micromechanics of the velocity and normal stress dependence of rock friction

Among the second-order effects on friction the most important are those of variable normal stress and of slip velocity. Velocity weakening, which is usually considered the source of the stick-slip instability in rock friction, has been observed in velocity stepping experiments with Westerly granite. The friction change, , was –0.01 to –0.008 for a tenfold velocity increase. Using normal closure measurements, we observed dilation upon each increase in sliding rate. We also observed, for the first time, time-dependent closure between surfaces during static loading. The dilation that occurred during the velocity stepping experiment was found to be that expected from the static time-dependent closure phenomenon. This change in closure was used to predict friction change with an elastic contact model. The calculated friction change which results from a change in contact area and asperity interlocking, is in good agreement with the observed velocity dependence of steady-state friction. Variable normal stress during sliding has two effects, first in creating new partial slip contacts and locking some existing fully sliding contacts and second in increasing interlocking, for instance when normal load is suddenly increased. As a result, a transient change in friction occurs upon a sudden change in normal load.     

地铁施工对济南白泉泉群流量的影响

为研究地铁建设对济南白泉泉群的影响，在综合分析白泉泉域地质、水文地质条件的基础上，假定研究区岩溶强径流带位置及水力性质，利用FEFLOW软件建立地下水流数值模型。以规划地铁M1号线为研究对象，分析了济南东站、梁王站、梁王东站分别施工及3个站同时施工4种情景下，采用施工降水或施工降水+人工回灌两种施工方式对白泉泉群流量的影响。结果表明：单独采用施工降水的施工方式使得白泉泉群流量衰减，其中3个站同时施工对泉流量的影响最大，泉流量最大衰减达5.48%；各站分别施工时，济南东站对泉流量影响最大，泉流量较未施工时减少了0.043×10⁴ m³/d。采用施工降水+人工回灌的施工方式，能够有效缓解泉流量的衰减，各车站施工时的泉流量衰减由仅施工降水时的2.26%~5.48%降低至0.08%~1.21%。岩溶强径流带有利于地下水形成优势径流，促进白泉泉群补给，一定程度上缓解因地铁施工引起的泉流量衰减。