Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.     

An improved SPH method for saturated soils and its application to investigate the mechanisms of embankment failure: Case of hydrostatic pore‐water pressure

The method of smoothed particle hydrodynamics (SPH) has recently been applied to computational geomechanics and has been shown to be a powerful alternative to the standard numerical method, that is, the finite element method, for handling large deformation and post‐failure of geomaterials. However, very few studies apply the SPH method to model saturated or submerged soil problems. Our recent studies of this matter revealed that significant errors may be made if the gradient of the pore‐water pressure is handled using the standard SPH formulation. To overcome this problem and to enhance the SPH applications to computational geomechanics, this article proposes a general SPH formulation, which can be applied straightforwardly to dry and saturated soils. For simplicity, the current work assumes hydrostatic pore‐water pressure. It is shown that the proposed formulation can remove the numerical error mentioned earlier. Moreover, this formulation automatically satisfies the dynamic boundary conditions at a submerged ground surface, thereby saving computational cost. Discussions on the applications of the standard and new SPH formulations are also given through some numerical tests. Furthermore, techniques to obtain the correct SPH solution are also proposed and discussed throughout. As an application of the proposed method, the effect of the dilatancy angle on the failure mechanism of a two‐sided embankment subjected to a high groundwater table is presented and compared with that of other solutions. Finally, the proposed formulation can be considered a basic formulation for further developments of SPH for saturated soils. Copyright © 2011 John Wiley & Sons, Ltd.     

Particle manifold method (PMM): A new continuum‐discontinuum numerical model for geomechanics

Particle manifold method (PMM) is a new extension of the numerical manifold method (NMM). PMM uses a mathematical cover system to describe the motion and deformation of a particle‐based physical domain. By introducing the concept of particle into NMM, PMM takes the advantages of easy topological and contact operations with particles. In this article, the methodology, formulations and implementation of the method are presented, together with modelling examples for validation. It is found that good solutions for both continuous and discontinuous problems are obtained by the new developed PMM. Due to the underlying coupled continuum‐discontinuum property of PMM, it has great potential for modelling of geomechanical problems. Copyright © 2012 John Wiley & Sons, Ltd.     

周期脉冲撞击的两分量Bose-Einstein凝聚系统的单粒子相干和对纠缠

在周期脉冲撞击的两分量Bose-Einstein凝聚系统中,研究了量子混沌对单粒子相干和对纠缠性质的影响.研究表明,混沌促使单粒子相干发生强烈衰减并保持着较低的相干度,同时对纠缠出现最大值并在较短时间后消失.利用单粒子相干的这种性质可以直接测量量子混沌存在的相空间结构,有利于预防Bose-Einstein凝聚的瓦解和控制凝聚体的混沌行为.     

长春台磁暴特征研究

依据长春地震台记录的磁暴资料,系统总结了第19、20、21三个太阳活动周磁暴特征,并对全球M_s≥7.8级地震的发生与太阳黑子活动、磁暴的关系进行了初步探讨。     

The influence of aerosol particle composition on cloud droplet formation

A difference in partitioning between cloud droplets and interstitial air for two chemical species (elemental carbon and sulphur) with different expected behaviour in nucleation scavenging was observed in clouds at Mt. Kleiner Feldberg (825 m asl), near Frankfurt, Germany. The fraction of sulphur incorporated in cloud droplets was always higher than the fraction of elemental carbon. This difference in partitioning has also been observed in fog but under different pollution conditions in the Po Valley, Italy. Both these studies were based on bulk samples. In the present study at Kleiner Feldberg, impactor samples of the particles in the interstitial air and the cloud droplet residuals were taken and a single particle analysis was done on the samples. It was found that, for a given particle size, the majority of particles forming cloud droplets were soluble and that insoluble particles preferentially remained in the interstitial air.     

大气有机污染分析和评价I．采样方法及采样误差

对近１０年来国外有关大气污染物的采样方法、有机污染物在气、固相中的分配以及采样误差的主要文献做了简要回顾。对不同采样器的采样效率、误差来源及误差校正方法进行了讨论。列举了一些富有指导意义的研究成果和结论。可以看出，在消除或限制了采样误差后，所得分析结果为客观评价环境污染问题提供了更可靠的依据。     

准晶体的构筑原理及微粒分数维结构模型

准晶体的原子构造中两个原理在起作用,即二十面体原理和黄金中值原理。二十面体原理是指大小相近的原子形成孤立的十二次配位体时,二十面体配位形式在能量上最有利。黄金中值原理是指在准晶体中原子的排列符合黄金中值律。这两个原理适用于由少量原子构成的体系,也适用于某些生物的结构。运用这两个原理于准晶体微粒,我们获得了最简单的准晶体结构模型。此模型可以解释Al-Mn准晶体的高分辨图的所有细节。此模型与Hiraga模型以及Bursill和彭菊琳模型都不相同。在此模型中Al_(12)Mn二十面体不是共棱的。这一模型具有分数维结构的待征,因此称之为准晶体的微粒分数维结构模型。     

Research Status and Progress of Balloon-borne Cloud and Precipitation Particles Probe

The accurate observation of the microphysical structure of cloud and precipitation plays an important role in understanding the formation of clouds and precipitation. In-situ measurement using measuring instruments carried by meteorological balloons is an effective way to obtain the microphysical properties of cloud and precipitation particles, which is a supplementary means for aircraft to observe cloud and precipitation particles. This observation method plays a more and more important role in in-situ measurement. According to the difference of the working principle of the existing balloon-borne cloud and precipitation particles probes, the detectors can be divided into particle impact-sampling sensors, particle imaging sensors, light-scattering sensors, light intensity attenuation sensors and charge measurement sensors. The working principles, key technologies and main advantages and disadvantages of typical instruments were summarized, and their applications to detailed cloud structure acquisition, cloud remote sensing method establishment, cloud and precipitation physical process research and parameterization, and scientific observation of thunderstorm clouds were briefly introduced. Finally, the development trend of balloon-borne cloud precipitation particle detectors was prospected, which will provide reference for related technical research and equipment development.     

IAP AGCM中短波辐射方案的改进研究II·短波辐射方案的改进

在Version 2的基础上,对短波辐射方案进行进一步的改进:引入了新增非灰体气体吸收效应、冰晶粒子形状效应和尺度效应以及云的不均匀性效应(称为Version 3)。数值模拟试验结果表明:Version 3能更好地模拟出全球冬、夏季的降水场、海平面气压场及地表气温场的主要分布特征,并且能相当准确地反映出这几个场的季节性变化特征。Version 3对这3个场的模拟能力明显优于原版本(Version 1)。此外,它对东亚地区的季风降雨具有很好的模拟能力,能较好地反映东亚区域降水的季节性变化。可见,Version 3为进一步研究云-辐射相互作用提供了很好的模式基础。本工作还清楚地表明,模式的进一步发展必须进行对相关物理过程中各个因子的更精确刻画,只有这样,模式才能得到更好的模拟能力。