地统计学方法在土壤学中的应用

地统计学目前在土壤科学中得到广泛的应用和发展,成为认识土壤特征的一个重要工具.地统计学的空间变异函数和克里格插值等方法是土壤性状分析的主要手段,空间变异函数主要用于描述土壤理化性状空间变异特性,不同的插值方法可优化田间试验设计和田间采样方案,克里格插值方法则特别适用于未测量点土壤属性值的估测等.近年插值方法又被广泛应用于确定区域土壤环境容量和土壤质量标准,随机模拟则用于对土壤特性进行不确定性估计等.因而,地统计学方法对我国大量土壤学资料的整合与分析具有极大的应用前景.     

Hydrologic response of engineered media in living roofs and bioretention to large rainfalls: experiments and modeling

The hydrologic response of engineered media plays an important role in determining a stormwater control measure's ability to reduce runoff volume, flow rate, timing, and pollutant loads. Five engineered media, typical of living roof and bioretention stormwater control measures, were investigated in laboratory column experiments for their hydrologic responses to steady, large inflow rates. The inflow, medium water content response, and outflow were all measured. The water flow mechanism (uniform flow vs. preferential flow) was investigated by analyzing medium water content response in terms of timing, magnitude, and sequence with depth. Modeling the hydrologic process was conducted in the HYDRUS‐1D software, applying the Richards equation for uniform flow modeling, and a mobile–immobile model for preferential flow modeling. Uniform flow existed in most cases, including all initially dry living roof media with bimodal pore size distributions and one bioretention medium with unimodal pore size distribution. The Richards equation can predict the outflow hydrograph reasonably well for uniform flow conditions when medium hydraulic properties are adequately represented by appropriate functions. Preferential flow was found in two media with bimodal pore size distributions. The occurrence of preferential flow is more likely due to the interaction between the bimodal pore structure and the initial water content rather than the large inflow rate.     

琼胶/SiO2复合纤维的制备及性能研究

利用湿法纺丝技术制备了琼胶/SiO₂复合纤维，对琼胶分子在溶液中的分散性、纺丝液流变性、纤维的形貌、化学结构分别用DLS、旋转黏度计、SEM、FTIR和XRD进行了表征，并对纤维的力学性能、热性能和吸湿性能进行了测定。研究结果表明：琼胶分子在溶液中呈纳米尺度分布，纺丝液具有良好的流动性；琼胶/纳米SiO₂复合纤维具有良好的形态。随着纳米SiO₂的添加量逐渐提高，复合纤维的力学拉伸强度先增强后降低，复合纤维的吸水性降低，复合纤维的热稳定性逐渐增强。结合复合纤维综合性能，纳米SiO₂的最佳添加质量分数为0.5%。     

Variability in the vertical hyporheic water exchange affected by hydraulic conductivity and river morphology at a natural confluent meander bend

River confluences and their associated tributaries are key morphodynamic nodes that play important roles in controlling hydraulic geometry and hyporheic water exchange in fluvial networks. However, the existing knowledge regarding hyporheic water exchange associated with river confluence morphology is relatively scarce. On January 14 and 15, 2016, the general hydraulic and morphological characteristics of the confluent meander bend (CMB) between the Juehe River and the Haohe River in the southern region of Xi'an City, Shaanxi Province, China, were investigated. The patterns and magnitudes of vertical hyporheic water exchange (VHWE) were estimated based on a one‐dimensional heat steady‐state model, whereas the sediment vertical hydraulic conductivity (K_v) was calculated via in situ permeameter tests. The results demonstrated that 6 hydrodynamic zones and their extensions were observed at the CMB during the test period. These zones were likely controlled by the obtuse junction angle and low momentum flux ratio, influencing the sediment grain size distribution of the CMB. The VHWE patterns at the test site during the test period mostly showed upwelling flow dominated by regional groundwater discharging into the river. The occurrence of longitudinal downwelling and upwelling patterns along the meander bend at the CMB was likely subjected to the comprehensive influences of the local sinuosity of the meander bend and regional groundwater discharge and finally formed regional and local flow paths. Additionally, in dominated upwelling areas, the change in VHWE magnitudes was nearly consistent with that in K_v values, and higher values of both variables generally occurred in erosional zones near the thalweg paths of the CMB, which were mostly made up of sand and gravel. This was potentially caused by the erosional and depositional processes subjected to confluence morphology. Furthermore, lower K_v values observed in downwelling areas at the CMB were attributed to sediment clogging caused by local downwelling flow. The confluence morphology and sediment K_v are thus likely the driving factors that cause local variations in the VHWE of fluvial systems.     

X射线荧光光谱法分析不同类型岩石中10种主量元素的测试能力验证

以28个不同类型岩石标样作外标,用玻璃熔片法制样,采用经验系数法进行基体校正,建立了X射线荧光光谱法(XRF)测定不同类型岩石中硅铝钙镁等10种主量元素的分析方法。该方法被用于参与GeoPT分析测试能力验证,15年来分析了23个不同类型的岩石验证样品。经验证该方法对SiO_2、Al_2O_3、K_2O和CaO具有非常好的分析效果(所有测定结果的|Z|2);对于MgO、MnO、TiO_2和Na_2O四个元素,尽管各有一个样品的分析结果的|Z|2,这主要是样品与标样的基体差异较大造成了低含量样品测定结果超差,但依然可获得好的分析效果;当TFe_2O_31.0%,P_2O_5含量在0.08%~0.80%区间时,分析结果的|Z|2,满足分析期望。总体上所建立的XRF分析方法稳定,可满足应用地球化学实验室测试不同类型岩石中10种主量元素的分析期望。     

含AgI焰剂成冰性能与物化特征的实验研究

利用CAMS的1 m~3等温云室系统筛选出新型高效AgI焰剂WMC-IN-001和WMG-IN-002。检测结果表明,它们具有较高的成核率,在-15℃时达到10~(15)g~(-1)AgI量级,尤其在-7℃时WMC-IN-001的成核率仍可达到10~(14)g~(-1)AgI量级。同时给出对节银剂配方和2011年市场上主要的几种催化剂的检测结果进行对比。WMC-IN-001和WMC-IN-002的成冰速率较慢,在各检测温度的成冰速率差异较小,均在40~55 min。利用冷场发射扫描电镜和能谱仪对WMC-IN-001燃烧产生的气溶胶粒子作了物化特征分析,粒子分布在0.02~0.60μm,具有两个典型的模态:0.02~0.10μm的较小的粒子和0.20~0.55μm的较大的粒子,均立方直径为0.2472μm。WMC-IN-001气溶胶粒子明显偏大,小粒子相对较少,这可能是其成冰速率偏慢的原因之一。     

从平衡-封闭-静态转向非平衡-开放-动力学研究-热液矿床成因的若干新概念概述

热液金属矿床成因研究过程中,观测与实验始终是密切结合的。上世纪70年代,平衡热力学的实验数据的快速积累,使人们用热力学理论计算可以预测和反演矿石和岩石的成因。但是,没有矿物-水溶液的反应速率数据,又没有与流体力学的结合,搞清楚矿石成因是困难的。七、八十年代,开始研究矿物与水溶液的反应动力学实验。科学家们开始瞄准了从平衡-封闭-静态转向非平衡-开放-动力学研究的这个大方向。1992年我们建立地球化学动力学开放研究实验室。研究高温高压矿物与水反应速率,发现固液的开放体系的自组织现象。实验发现温度影响矿物的各个元素反应速率改变,发现在跨越水临界态时矿物与水反应速率涨落、在近临界的气-液两相不混溶区一些金属进入气相、超临界流体的氧化作用及特别的溶剂性能影响矿物溶解性质。实验证实:临界态区流体与矿石成因有关。水岩相互作用的反应动力学实验温度从低温到550度,揭示矿石的金属来源、迁移、金属与蚀变分带机制。一大批大于300度的矿物与水反应动力学实验在国际界是少有报道的。九十年代,超高压的科学发展,与同步辐射光源的技术进步的结合,使固体地球科学又迈向了地球深内部。我们发展了高温高压流体性质的原位直测(测量850℃水溶液)红外谱,发现深部流体的新性质:气液两相流体的新结构,在临界温度区(300~400℃),水分子氢键网络的破坏受压力影响不大(23MPa~3GPa),同时,出现水的高电导率。研发新仪器为开放-流动-非平衡的反应动力学实验与极端条件下物质性质的直接观测结合,在科学前沿领域开辟了创新道路。     

Determination of the factors governing soil erodibility using hyperspectral visible and near-infrared reflectance spectroscopy

Soil erodibility, which is difficult to estimate and upscaling, was determined in this study using multiple spectral models of soil properties (soil organic matter (SOM), water-stable aggregates (WSA) > 0.25 mm, the geometric mean radius (D_g)). Herein, the soil erodibility indicators were calculated, and soil properties were quantitatively analyzed based on laboratory simulation experiments involving two selected contrasting soils. In addition, continuous wavelet transformation was applied to the reflectance spectra (350–2500 nm) of 65 soil samples from the study area. To build the relationship, the soil properties that control erodibility were identified prior to the spectral analysis. In this study, the SOM, D_g and WSA >0.25 mm were selected to represent the most significant soil properties controlling erodibility and describe the erodibility indicator based on a logarithmic regression model as a function of SOM or WSA > 0.25 mm. Five, six and three wavelet features were observed to calibrate the estimated soil properties model, and the best performance was obtained with a combination feature regression model for SOM (R² = 0.86, p < 0.01), D_g (R² = 0.79, p < 0.01) and WSA >0.25 mm (R² = 0.61, p < 0.01), respectively. One part of the wavelet features captured amplitude variations in the broad shape of the reflectance spectra, and another part captured variations in the shape and depth of the soil dry substances. The wavelet features for the validated dataset used to predict the SOM, WSA >0.25 mm and D_g were not significantly different compared with the calibrated dataset. The synthesized spectral models of soil properties, and the formation of a new equation for soil erodibility transformed from the spectral models of soil properties are presented in this study. These results show that a spectral analytical approach can be applied to complex datasets and provide new insights into emerging dynamic variation with erodibility estimation.     

Re-parameterization of a quasi-analytical algorithm for colored dissolved organic matter dominant inland waters

Quasi-Analytical Algorithms (QAAs) are based on radiative transfer equations and have been used to derive inherent optical properties (IOPs) from the above surface remote sensing reflectance (R_rs) in aquatic systems in which phytoplankton is the dominant optically active constituents (OACs). However, Colored Dissolved Organic Matter (CDOM) and Non Algal Particles (NAP) can also be dominant OACs in water bodies and till now a QAA has not been parametrized for these aquatic systems. In this study, we compared the performance of three widely used QAAs in two CDOM dominated aquatic systems which were unsuccessful in retrieving the spectral shape of IOPS and produced minimum errors of 350% for the total absorption coefficient (a), 39% for colored dissolved matter absorption coefficient (a_CDM) and 7566.33% for phytoplankton absorption coefficient (a_phy). We re-parameterized a QAA for CDOM dominated (hereafter QAA_CDOM) waters which was able to not only achieve the spectral shape of the OACs absorption coefficients but also brought the error magnitude to a reasonable level. The average errors found for the 400–750 nm range were 30.71 and 14.51 for a, 14.89 and 8.95 for a_CDM and 25.90 and 29.76 for a_phy in Funil and Itumbiara Reservoirs, Brazil respectively. Although QAA_CDOM showed significant promise for retrieving IOPs in CDOM dominated waters, results indicated further tuning is needed in the estimation of a(λ) and a_phy(λ). Successful retrieval of the absorption coefficients by QAA_CDOM would be very useful in monitoring the spatio-temporal variability of IOPS in CDOM dominated waters.     

The variation of crustal stretching and different modes of rifting along the Australian southern continental margin

The southern margin of Australia is a passive continental margin, formed during a Late Jurassic–Cretaceous rifting phase. The development of this passive margin is mainly associated with extensional processes that caused crustal thinning. In this work, we have measured the amount of extension and the stretching factor (β factor) across seven transect profiles approximately evenly distributed across the margin. The obtained results show that the amount of extension and the β factor along the margin vary from west to east. The lowest amount of extension, low–intermediate β factors and a very narrow margin are observed in the western part with 80 km of extension and is underlain mostly by the Archean Yilgarn Craton and the Albany–Fraser Orogen. The Gawler Craton in the centre of the south Australian margin is another region of low extension and low–intermediate β factor. The largest amount of extension (384 km) and the largest β factor (β = 1.88) are found in the eastern part of the passive margin in an area underlain by Phanerozoic Tasman Orogen units. Our results imply that there is a strong control of the age and thickness of the continental lithosphere on the style of rifting along the Australian passive margin. Rifting of old and cold lithosphere results in a narrow passive margin, with the formation of relatively few faults with relatively wide spacing, while rifting of younger, warmer lithosphere leads to wide rifting that is accommodated by a large number of faults with small spacing.