无机碳与雨生红球藻(Haematococcus pluvialis)细胞调节物质

以单细胞雨生红球藻为材料，采用酸碱滴定和CO2加富通气培养微藻的方法，对旧液中HCO3^-和CO3^2-浓度变化以及对红球藻细胞生长的影响进行了研究。结果表明，旧液具有限制红球藻细胞生长和诱导细胞转化的作用。同时，旧液中无机碳离子浓度明显高于新液。培养液中富含CO3^2-时，各细胞数量与CO3^2-浓度呈正相关，相关系数为0．88。溶液中仅有HCO3^-时，各细胞数与HCO3^-浓度也呈正相关性。因此，排除了CO3^2-和HCO3^-作为旧液中的调节物质，限制红球藻细胞生长和诱导细胞转化的可能性。旧液乙酸乙酯提取物生物检测实验表明，在粗提取物中有降低细胞增长和诱导细胞转化的活性，表明调节物质能溶于有机相，也反过来证实无机碳离子不是旧液中的调节物质。DNA含量和倍性分析结果表明，红球藻游动细胞DNA复制可以加倍后不经过原生质分裂就可以再次进行，因此推测旧液中的调节物质对原生质分裂过程产生抑制作用，而不对DNA复制过程产生抑制作用。     

南海中建南盆地构造样式分析

中建南盆地是发育于南海西部陆缘我国传统疆界线附近的新生代沉积盆地,大部分区域位于我国传统疆界线内。在对盆地近万千米多道地震资料综合分析解释的基础上,对盆地的主要构造样式以及它们与油气的关系进行了分析,结果表明,盆地分布面积广,沉积厚度大,油气前景良好。盆地是属于早期断陷、后期经走滑改造而成的复合型盆地,其构造演化经历了3个阶段,不同的阶段发育不同的构造样式:早期为断陷阶段,伸展型构造样式发育;中期为断坳—压扭或走滑反转阶段,产生走滑或压扭性构造样式;晚期为区域沉降阶段,以垂向沉积为主,无明显的构造样式发育。     

渤、黄、东海夏季环流的三维斜压模型

基于拉格朗日时均观点描述环流，建立起潮流与准定常流共同占优势系统中的陆浅海环流模型，并诊断计算了夏季渤、黄、东海的三维环流图。模拟结果较好地再现了渤、黄、东海主要流系的特征。对照冬季结果，对渤、黄、东海环流的季节变化做了阐述。从环流垂向分量的分布图上，可发现渐闽近海、长江口外存在较明显的上升流区。另外，对夏季渤、黄、东海的热盐环流和潮致余流分别进行了模拟，发现它们均能在黄海构成一逆时针向的五流系统，这对形成和维持夏季黄海冷水团的存在有重要作用。热盐环流的模拟结果表明，黄海冷水团环流含有“热成流”的成分；通过Lagrange余流的计算发现环绕黄河冷水团的环流还含有“潮成流”的成分。     

断阶型潜山带地质模型的建立及储层预测--以CG20潜山为例

以 CG2 0潜山为例 ,从建立地质模型入手 ,包括地层模型、构造模型、储集模型、储盖组合模型、速度模型等 ,认识到各套地层分布和储层物性的差异均与地震响应密切相关 ,因此可以利用地震波的信息 ,预测潜山储层的发育及分布情况。在对 CG2 0潜山进行精细全三维构造解释的基础上 ,探讨性地应用了测井约束反演、吸收系数、相干分析及三维模式识别等技术 ,对潜山储层进行了预测 ,从而提高了潜山勘探的效益 ,并为类似断阶型潜山带的勘探提供了成功的经验 ,具有一定的指导意义。     

塘沽海区海底地形的SAR影像仿真与反演研究

利用袁业立、金梅兵(1997)提出的海底地形SAR影像仿真与反演模型，对渤海塘沽海区的一张Radarsat SAR影像进行了仿真和水深反演研究。研究结果表明：仿真影像与真实SAR影像基本吻合，反演水深与实际水深也有较好的一致性；进一步证实了袁业立(1997)SAR成像机理的正确性和在中国近海利用SAR影像进行浅海水深探测的可行性。     

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

基于多源数据的三维城市建模方法

以天津新港三维城市建模为例,介绍了基于二维数据、DEM和3D模型等多源数据的三维城市建模的方法和关键技术。为有效利用现有数据资源快速、准确建立三维城市模型提供了一种经济、灵活、省时、高效的方法。     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.