深水钻井中浅水流灾害问题及其地球物理识别技术

在深水钻井中,浅水流是一种常见的地质灾害。中国正在进行深水油气勘探,十分有必要开展这方面的地质灾害研究。介绍了浅水流的形成机制及地球物理特性。目前用于识别和预测浅水流的手段有测井和反射地震两大类方法。主要介绍了几种用于参数提取的地震反演方法,如传统Dix反演、叠后振幅反演、层析反演、叠前振幅反演等。     

河口海岸三维水流数值模型中几种垂向坐标模式研究述评

回顾了近年来国内外河口、近岸海域三维斜压水流数值模式研究的进展,着重讨论了不同垂向坐标下三维水流模式的发展状况以及存在的问题。地形拟合坐标(σ坐标)模式可以很好地拟合床面地形和自由面,已在物理海洋学中被广泛使用。但在地形变化剧烈,尤其在密度层结效应明显的海域,σ坐标模式中的水平压强梯度力误差会引起伪密度流。寻求高精度的数值模式以及更加有效的拟合坐标变换将是值得努力的方向。     

济阳坳陷博兴洼陷西部沙三段层序地层

选取以基准面为参照面的高分辨率层序地层学的理论与分析技术,对博兴洼陷西部沙三段开展层序地层分析工作。在博兴洼陷沙三段识别出5个层序界面和4个较大规模的洪泛面,由此将研究层段划分为4个长期基准面旋回(相当于3级层序),并通过长期旋回内部次级转换面的识别,细分出8个中期旋回(大致相当于4级层序)。通过对比建立了研究区的高分辨率层序地层格架,并分析了各层序的地层发育特征。以层序格架为基础,探讨了研究区各层序的沉积演化特征,建立了辫状三角洲—浊积扇层序发育模式,认为研究区辫状三角洲和浊积扇均具有加积作用特点;斜坡区为辫状三角洲发育区,而洼陷区为浊积扇发育区;中期基准面旋回下降期辫状三角洲发育,上升期浊积扇发育;浊积扇体的发育规模与湖泛规模相关。综合分析认为,浊积扇是形成岩性圈闭的主要储集砂体类型,其发育的有利层位是MSC8、MSC7、MSC6、MSC5旋回的上升半旋回,岩性圈闭发育的有利区是博兴南部斜坡坡折带之下的洼陷区。     

Sediment–water interactions of natural oestrogens under estuarine conditions

The natural human female hormones oestrone and 17β-oestradiol have been implicated in the disruption of endocrine systems in some wildlife adjacent to sewage effluents. The sorption behaviour of these two compounds under estuarine conditions was studied by spiking either 2.55 μg of oestrone or 2.65 μg of 17β-oestradiol in kinetic experiments. In equilibrium experiments, 3 ng of oestrone or 3.2 ng of 17β-oestradiol was added in each of the centrifuge tubes. Sorption onto sediment particles was relatively slow, with sorption equilibrium being reached in about 70 and 170 h for oestrone and 17β-oestradiol, respectively. The effects of a variety of environmental parameters on sorption were studied including salinity, sediment concentration (SC), the presence of a third phase, particle size and, also, surfactant concentrations. Results show that although salinity did not induce any statistically significant effect on the sorption of 17β-oestradiol, it did statistically enhance the sorption of oestrone, and a salting constant of 0.3 l mol⁻¹ was derived. The partition coefficient for both compounds decreased with increasing sediment concentration, a phenomenon that has been widely reported and attributed to the presence of colloids (which could enhance dissolved concentrations). In this paper, the true partition coefficients for sediment particles (K_p^true) and colloidal particles (K_c^true) have been calculated, and a K_p^true value of 141 and 102 ml g⁻¹ was obtained for oestrone and 17β-oestradiol, respectively. In addition, K_c^true values for oestrone (222×10² ml g⁻¹) and 17β-oestradiol (135×10² ml g⁻¹) were two orders of magnitude higher than their respective K_p^true values, suggesting that the colloidal particles are significantly stronger sorbents for natural oestrogens than sediment particles. Particles of different sizes were found to have different partition coefficients due to the strong relationships between partition coefficients for the two compounds and particulate organic carbon (POC) contents and specific surface areas (SSAs). The presence of a surfactant was shown to reduce the partition coefficients for the two compounds, although its concentrations being used were higher than those normally found in the natural environment.     

崂山花岗岩地区含锶、偏硅酸矿泉水的形成机理

报道了崂山花岗岩地区矿泉水的特征。指出其矿泉类型为含锶、偏硅酸型，并讨论了其形成机理。     

Fe(OH)_3胶体与铜离子作用的研究

使用切向流超滤系统得到粒度较均匀的Fe(OH)3胶体,进而对Fe(OH)3胶体粒子与Cu2 的作用进行了研究,并将实验结果与南沙群岛海区表层水中铜与胶体物质结合状况的调查数据进行了比较分析,得到如下结果:(1)在海水介质中,铜在Fe(OH)3胶体上结合的百分率(pH>5)随pH的升高而下降,随着Fe(OH)3胶体浓度的减小而下降?(2)在天然海水介质中,使铜在Fe(OH)3胶体上结合的百分率在50%-70%的有机物浓度为1.0mg·L-1,有机物浓度的增大使铜与无机胶体结合的百分率有下降的趋势?     

亚像素定位的关键问题研究

分析了控制点标志的选择与设计,采用了图像处理、Hough变换、角点与直线高精度定位算子等方法,实现了中南大学近景摄影测量二维控制场1 350个人工标志点的自动识别和亚像素定位,仿真图检测平均精度达到±0.05像素。     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

Geoacoustic Characterisation of Fine-grained Sediments using Single and Multiple Reflection Data

Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density, compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive, with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths and sensitivities of each approach are explored through simulations guided by experience with measured data.