放牧对古尔班通古特沙漠南部半固定沙垄地表性质的影响

Intensive grazing in spring-summer has been responsible for environmental deg- radation of the Gurbantunggut Desert in recent years. The coverage of plants and biological crusts, sand surface stability and physicochemical characteristics of soil on the dune surface were conducted in 2002 (winter grazing) and 2005 (spring-summer grazing). The results showed that over 80% of the total area of the dune surface was covered by well-developed biological crusts and plants in 2002, when the interdune and middle to lower part of dune slopes were stabilized and only the crest had 10-40 m wide mobile belt. Affected by spring-summer grazing in 2005, over 80% of the total cover of biological crust was destructed and the plant coverage only reached 1/5 of that in 2002, especially the ephemeral plant cover had a great change. The value of sand transport potential in 2005 only reached 1/3 of that in 2002, but the total surface activity in 2005 was 1.6 times stronger than that in 2002. Mean- while the mobile area began to expand from the dune top to the whole dune surface following spring-summer grazing. Compared with 2002, medium sand content of the dune surface soil increased by 13.9%, while that of fine and very fine sands decreased by 7.4% and 8.0% re- spectively in 2005 and the soil organic matter in 2005 was only about 1/2 of that in 2002. It is obvious that the presence of snow cover and frozen soil in winter could avoid the surface structure destruction in winter, while spring--summer grazing made excessive damage to biologic crusts and ephemeral plants. Spring is the main windy season in Gurbantunggut Desert and therefore intensive activity of dune surface occurred following spring-summer grazing, which led to a great loss of fine sand and organic matter. It can be seen that grazing season have a significant influence on the sustainable development of the desert ecosystem in Northwest China.     

Dynamic loading test and simulation analysis of full‐scale semi‐active hydraulic damper for structural control

A semi‐active hydraulic damper (SHD) for a semi‐active damper system, which is useful for practical structural control especially for large earthquakes, has been developed. Its maximum damping force is set to 1 or 2 MN, and it is controlled by only 70 W of electric power. An SHD with a maximum damping force of 1 MN was applied to an actual building in 1998. This paper first presents the results of a dynamic loading test to confirm the control performance of the SHD. Next, an analytical model of SHDs (SHD model) is constructed with the same concept for two kinds of SHDs based on the test results. Through simulation analyses of the test results using the proposed SHD model, the dynamic characteristics of the SHD can be well represented within practical conditions. Simulation analyses are also carried out using a simple structure model with the SHD model. It is shown that this SHD model can be used to precisely evaluate the control effect of the semi‐active damper system and is useful in practical SHD design under the applied conditions. Copyright © 2000 John Wiley & Sons, Ltd.     

Seismic behaviour of hybrid systems made of PR composite frames coupled with dissipative bracings

The paper investigates the dynamic behaviour of hybrid systems made of partially restrained (PR) steel–concrete composite frames coupled with viscoelastic dissipative bracings. A numerical model that accounts for both the resisting mechanisms of the joint and the viscoelastic contribution of the dissipative bracing is introduced and briefly discussed. The model is first validated against experimental outcomes obtained on a one‐storey two‐bay composite frame with partial strength semi‐rigid joints subjected to free vibrations. A number of time‐history analyses under different earthquake ground motions and peak ground accelerations are then carried out on the same type of frame. The purpose is to investigate the influence of the type of beam‐to‐column connection and property of the viscoelastic bracing on the performance of the hybrid system. The inherent stiffness of the bare PR frame and the plastic hysteresis of the beam‐to‐column joints, which always lead to only limited damage in the joint, are found to provide a significant contribution to the overall structural performance even under destructive earthquakes. This remark leads to the conclusion that the viscoelastic bracing can be effectively used within the hybrid system. Copyright © 2008 John Wiley & Sons, Ltd.     

炼钢增碳剂—一种类石墨的研制

以优质无烟煤为原料,经选矿提纯,提高煤的碳含量,现经石墨化处理制得炼钢增碳剂。产品主要技术指标：ｗ（Ｃ）≥９０％,ｗ（灰分）〈７％,ｗ（挥发分）〈３％,ｗ（Ｓ）＝０．４３％,ｗ（Ｐ）＝０．０６％,颗粒电阻〈１．０Ω／粒,抗压强度为２１．０ｋｇ／粒。     

论热带纬圈半地转运动的建立

文中在赤道β平面上 ,在滤掉低频 Rossby波的情况下 ,研究了纬圈半地转运动的建立。指出 ,只有当运动的纬圈尺度很大时 ,非地转风分量才能随着重力惯性波的频散而消失 ,从而建立起纬圈半地转平衡。应用位势涡度不变式 ,给出了纬圈半地转适应后物理场的解。同时指出 ,Kelvin波 (对赤道对称情况 )和混合波的 Rossby波波段 (对赤道反对称情况 )将不参与适应运动 ,它们属于发展运动中的角色。     

Climate‐invariant area–slope relations in channel heads initiated by surface runoff

We use a dataset of 38 field‐mapped channel heads from a semi‐arid environment in western Colorado to examine relationships between contributing drainage area (A) and local hillslope gradient (θ) in relation to dominant process of initiation (surface runoff versus subsurface flow). Channel heads resulting primarily from subsurface flow have significantly greater values of A, longer basin lengths, and shallower local gradients than channel heads resulting primarily from surface runoff. We also compare the data from western Colorado to six analogous datasets from more humid regions in other portions of the United States and in southeast Australia. Comparison of the confidence intervals for the exponent values of A–θ regression lines reveals that the confidence intervals for the exponent of western Colorado channel heads with both surface and subsurface flow overlap with the confidence intervals for the exponent of all other datasets. This suggests that A–θ relationships do not differ significantly between diverse geographic locations. Copyright © 2017 John Wiley & Sons, Ltd.     

Grazing impacts on gully dynamics indicate approaches for gully erosion control in northeast Australia

Drainage network extension in semi‐arid rangelands has contributed to a large increase in the amount of fine sediment delivered to the coastal lagoon of the Great Barrier Reef, but gully erosion rates and dynamics are poorly understood. This study monitored annual erosion, deposition and vegetation cover in six gullies for 13 years, in granite‐derived soils of the tropical Burdekin River basin. We also monitored a further 11 gullies in three nearby catchments for 4 years to investigate the effects of grazing intensity. Under livestock grazing, the long‐term fine sediment yield from the planform area of gullies was 6.1 t ha^‐1 yr^‐1. This was 7.3 times the catchment sediment yield, indicating that gullies were erosion hotspots within the catchment. It was estimated that gully erosion supplied between 29 and 44% of catchment sediment yield from 4.5% of catchment area, of which 85% was derived from gully wall erosion. Under long‐term livestock exclusion gully sediment yields were 77% lower than those of grazed gullies due to smaller gully extent, and lower erosion rates especially on gully walls. Gully wall erosion will continue to be a major landscape sediment source that is sensitive to grazing pressure, long after gully length and depth have stabilised. Wall erosion was generally lower at higher levels of wall vegetation cover, suggesting that yield could be reduced by increasing cover. Annual variations in gully head erosion and net sediment yield were strongly dependent on annual rainfall and runoff, suggesting that sediment yield would also be reduced if surface runoff could be reduced. Deposition occurred in the downstream valley segments of most gullies. This study concludes that reducing livestock grazing pressure within and around gullies in hillslope drainage lines is a primary method of gully erosion control, which could deliver substantial reductions in sediment yield. Copyright © 2018 John Wiley & Sons, Ltd.     

Flume tests on fluvial erosion mechanisms in till‐bed channels

Semi‐alluvial stream channels eroded into till and other glacial sediments are common in areas of extensive glacial deposition such as the Great Lakes region and northern interior plains of North America. The mechanics of erosion and erosional weakness of till results in the dominance of fluvial scour and mass erosion due to spontaneous fracture at planes of weakness under shearing flow. There have been few controlled tests looking at erosional mechanisms and resistance of till in river channels. We subjected small blocks of till to unidirectional flows in a laboratory flume to measure the threshold shear stress for erosion and observed the erosion mechanics. Critical shear stress for erosion varied from 7 to 8 Pa for samples with initial saturated moisture content in which a combination of fluvial scour and mass cracking/block erosion dominated. When dried, micro‐fissures occurred in the sample and erosional resistance of the till was extremely low at <1 Pa with erosion appearing to be by fluvial scour. When mobile gravel was added to the test conditions, the gravel reduced the erosion threshold slightly because of the enhanced scour around and below the gravel particles and the tendency for the gravel to aid in crack enlargement. Thus a partial or thin gravel cover over the till may provide no protection from erosion. The erosion processes and effects reflect the complex and contingent mechanics and properties of till, and suggest that the erosion characteristics of till bed semi‐alluvial channels differ from abrasion or plucking dominated processes in more resistant bedrock. Copyright © 2017 John Wiley & Sons, Ltd.     

Seismic retrofit of MRF buildings using decentralized semi‐active control for multi‐target performances

Numerous structures have been designed and built without taking earthquake ground motions or outdated seismic design codes into account. In order to improve the seismic performance of existing structures, many retrofit approaches based on performance‐based design have been developed. However, some of these approaches are inapplicable due to structural limitations or because they were developed with the assumption of single‐degree‐of‐freedom, which does not take higher modes into account. To overcome the limitations of these traditional methods, a multi‐performance‐based control design (MPBCD) methodology has been proposed by integrating a decentralized semi‐active control algorithm, magnetorheological dampers, and an advanced multi‐objective optimization method to provide various sets of retrofit control designs to satisfy multiple target performances under multiple seismic intensities without changing structural cross‐section sizes or material properties. This MPBCD method provides engineers with numerous sets of control designs (i.e., control device layouts with control design parameters) to help them select proper control designs to retrofit existing building structures and improve seismic performance. Copyright © 2016 John Wiley & Sons, Ltd.     

Assessing impacts of agricultural water interventions in the Kothapally watershed,Southern India

The paper describes a hydrological model for agricultural water intervention in a community watershed at Kothapally in India, developed through integrated management and a consortium approach. The impacts of various soil and water management interventions in the watershed are compared to no‐intervention during a 30‐year simulation period by application of the calibrated and validated ARCSWAT 2005 (Version 2.1.4a) modelling tool. Kothapally receives, on average, 800 mm rainfall in the monsoon period. 72% of total rainfall is converted as evaporation and transpiration (ET), 20% is stored by groundwater aquifer, and 8% exported as outflow from the watershed boundary in current water interventions. ET, groundwater recharge and outflow under no‐intervention conditions are found to be 64, 9, and 19%, respectively. Check dams helped in storing water for groundwater recharge, which can be used for irrigation, as well minimising soil loss. In situ water management practices improved the infiltration capacity and water holding capacity of the soil, which resulted in increased water availability by 10–30% and better crop yields compared to no‐intervention. Water outflows from the developed watershed were more than halved compared to no‐intervention, indicating potentially large negative downstream impacts if these systems were to be implemented on a larger scale. On the other hand, in the watershed development program, sediment loads to the streams were less than one‐tenth. It can be concluded that the hydrological impacts of large‐scale implementation of agricultural water interventions are significant. They result in improved rain‐fed agriculture and improved productivity and livelihood of farmers in upland areas while also addressing the issues of poverty, equity, and gender in watersheds. There is a need for case‐specific studies of such hydrological impacts along with other impacts in terms of equity, gender, sustainability, and development at the mesoscale. Copyright © 2011 John Wiley & Sons, Ltd.