可靠性约束下的海底油气集输管网系统优化

在管网系统满足一定可靠度的基础上，以费用最小为优化目标，对系统进行了优化，求出了满足一定可靠度指标的费用最小的管网布置方案。对树状网络可靠性进行了评估，提出了一个0-l规划模型，并运用图论和网络理论将管网系统的优化问题转变为求可靠度至少为α的网络固的最小生成树问题。     

On the estimation of mooring line characteristic resistance for reliability analysis

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.     

Reliability-based comparative study for mooring lines design criteria

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.     

A methodology for assessing the reliability of taut and slack mooring systems against instability

In the present study, a methodology for reliability assessment of slack and taut mooring systems against instability has been presented. For this purpose, first, stability analysis of slack and taut mooring systems has been carried out and instable regions are obtained using procedure available in the literature. Having known the instable region(s), methodology for reliability assessment has been proposed which is based on Monte Carlo Simulation technique. After using the proposed methodology, probabilities of failure and reliability indices has been obtained for the above systems. Some parametric studies, such as, effect of lower and upper limits of instability and effect of frequency range of generations are also included to obtain the results of practical interest.     

Risk Assessment for Tuzla Naval Base Breakwater

1 .IntroductionTurkeywasstruckbytwomajorearthquakeeventsonAugust 1 7thandNovember 1 2th ,1 999,namedIzmit (Mw=7.4 )andD櫣ｚｃｅ (Mw=7.2 )earthquakes,respectively .ThestationsoperatedbytheGeneralDirectorateofDisasterAffairs,theKandilliObservatoryandEarthquakeResearchInstituteofIstanbulTechnicalUniversitymeasuredatleast 2 7stronggroundmotionsfortheIzmitearthquakewithin 2 0 0kmofthefault.AsignificantsegmentofthefaultrupturedintheareabetweenthewestofGolcukandtheeastofLakeSapanca .Inthesou…     

边坡整体稳定的可靠性分析方法

边坡整体滑动稳定性的可靠性分析是建立在土体具有的抗力大于荷载效应的概率基础上进行设计和校验的。在条分法的基础上推导出了进行边坡稳定可靠性分析的统一极限状态方程 ,将土的容重γ、内摩擦角φ、粘聚力 c作为随机变量 ,当其为非正态分布时 ,进行当量正态化 ,考虑变量相关的情况 ,用简化相关法对随机变量进行统计分析 ,并以 Bishop圆弧滑动法为例 ,用 JC法求解边坡的可靠性指标及失效概率 ,给出计算安全系数和可靠性指标的算法程序。并就影响可靠性指标的因素如抗剪强度指标、变量分布形式、土性参数的变异性等进行了讨论。     

测量控制网优化设计的可靠性准则法

测量控制网优化设计与网的精度、可靠性、灵敏度以及费用等准则有关,但这些准则之间的关系又十分密切,本文提出了一种基于观测值内部可靠性指标的测量控制网模拟法优化设计新方法,介绍了其原理和特点,并用实例说明了用该方法的计算步骤和优化效益。     

GPS网中已知点粗差探测时限差的研究

在利用附合导线法对GPS网中已知点的可靠性进行检核时,本文对如何合理地、客观地确定限差,以达到有效检核的目的进行了探讨,提出了检核限差标准。并结合实例进行计算和分析,成功地剔除了含有粗差的已知点。     

基于蒙特卡罗法的多级黄土滑坡可靠性分析

滑坡稳定性分析目前工程中一般采用极限平衡算法。为了确定滑坡的稳定性系数,在计算过程中要将岩土体、计算模型简化,忽略一些影响滑坡稳定的次要因素,把影响滑坡稳定的各种主要因素作为确定参数。由于滑坡岩土体本身的非均质性及其参数确定具有随机性和变异性,用唯一的稳定系数不能客观地反映整个滑坡的真实安全程度。以陕西省夏呀河滑坡为例,通过野外详细调查、工程勘探和室内土工试验,初步确定该滑坡存在四级滑动面,难以用简单的单一滑动面计算其稳定性。因此,先采用推力传递系数法对滑坡体上的四级滑坡分别进行滑坡稳定性计算,得到该滑坡体上的四级滑坡稳定系数。再采用蒙特卡罗法对该四级滑坡进行可靠性分析,得到其可靠度,定量地表达夏呀河四级滑坡的安全程度。同时对比分析夏呀河四级滑坡的稳定系数和失稳概率,综合评价该滑坡体上的四级滑坡的稳定性及其风险概率,为滑坡的工程治理及预测预警、灾害危险性评价提供依据。