GPS在计算导弹脱靶量中的应用研究

将GPS技术应用于导弹靶试脱靶量测量,并对计算过程作了较为详细的分析和探讨。试验证明：利用GPS测定脱靶量,测量精度高,简单易行,可以在靶场逐步试验推广。     

成都经济区黄壤土壤剖面Pb形态分布特征及其影响因素

土壤剖面中不同形态铅迁移转化及其影响因素的研究对于了解Pb的土壤地球化学行为具有非常重要的意义。以四川省成都经济区农田生态系统黄壤剖面中不同形态Pb分布特征为例,探讨黄壤剖面中不同形态Pb的迁移转化影响因素及其生态危害性。结果表明:在黄壤剖面中,Pb总量表现为表层富集、深层稳定的特点;弱有机结合态含量表现为表层富集、深层稳定的特点,其他形态Pb含量剖面分布特征不明显;土壤中的Pb主要是以铁锰氧化态和残渣态为主,其他形态Pb含量所占比例较小;成土过程中,随着Pb总量的增加,稳定态Pb含量增加,而活动态相对减少;土壤pH值对各形态Pb含量分布影响较大,尤其是对碳酸盐结合态的影响显著;土壤总有机碳也是影响土壤中各形态Pb含量分布的重要因素之一,尤其是对有机结合态Pb含量影响显著;而随着土壤熟化程度的增加,黄壤剖面中的活动态含量增加,稳定态减少;剖面中的Pb迁移系数和生物可利用系数均较小,说明Pb不易向下迁移,容易在表层富集,对植物及人类有一定的危害。     

多孔紊动射流的数值模拟与实验研究进展

多孔射流作为流体运动的一种重要类型,在工程中具有非常广泛的用途。由于多孔射流各股水流之间的卷吸和掺混的存在,增加了流场的复杂性。长期以来研究人员从理论分析、实验测量和数值模拟方面对多孔紊动射流进行了大量的研究工作,目前已经认识了流场中的许多流动特性和流动机理。从数值模拟和实验研究两个方面,比较分析了国内外多孔紊动射流的研究现状和研究结果,评述了不同湍流模型以及不同实验测量方法对紊动射流的预测能力,讨论了存在的问题并对该领域的研究方向进行了展望。     

多尺度空间线状实体形状相似关系的表达与度量

本文对空间数据多尺度表达中线状实体综合前后的形状相似性进行了描述、分析和研究。通过调查统计,得出了衡量线状实体形状相似程度的两个重要参量SIMⅠ、SIMⅡ,基于这两个参量给出了空间线状实体形状相似性的定义以及在不同尺度下线状实体形状相似性的度量方法,并用实例进行验证。为空间数据多尺度表达时线状实体的形状表达提供了一种分析和评价手段。     

GPS控制网环检验程序的设计

在GPS控制测量中,环检验是个不可或缺的步骤,其目的在于及时发现粗差,控制整网的精度。本文通过设计一个环检验程序,从算法角度讨论了手工检验和自动检验的具体实现,并详细介绍了针对复杂网形控制网构环算法的优化,保证了程序的可靠性和稳健性。     

GPS RTK校准检测试验场建设的研究

叙述了GPSRTK接收机校准检测试验场建设的方法,介绍了GPSRTK接收机校准检测的步骤,提出了GPSRTK校准检测的项目和结果判定方法,为未来的GPSRTK国家检定规程的出台做了有益地探索。     

Influence of dimethylsulfide produced by marine algae on the global climate

DMS (dimethylsulfide), a breakdown product of cellular solutes of many species of macroalgae andphytoplankton plays an important role in regulating global climate and counteracting partly the "greenhouse" effect.In this paper, the advance and prospects of DMS study are reviewed and discussed with respectto DMS sample storage, measurement and importance in regulating global climate and the acidity ofrain and aerosol.     

A comparative error analysis of manual versus automated methods of data acquisition for algebraic strain estimation

This paper presents a statistical analysis of the algebraic strain estimation algorithm of Shimamoto and Ikeda [Shimamoto, T., Ikeda, Y., 1976. A simple algebraic method for strain estimation from deformed eillipsoidal objects: 1. Basic theory. Tectonophysics 36, 315–337]. It is argued that the error in their strain estimation procedure can be quantified using an expected discrepancy measure. An analysis of this measure demonstrates that the error is inversely proportional to the number of clasts used. The paper also examines the role of measurement error, in particular that incurred under (i) a moment based and (ii) manual data acquisition methods. Detailed analysis of these two acquisition methods shows that in both cases, the effect of measurement error on the expected discrepancy is small relative to the effect of the sample size (number of objects). Given their relative speed advantage, this result favours the use of automated measurement methods even if they incur more measurement error on individual objects. Validation of these results is carried out by means of a simulation study, as well as by reference to studies appearing in previous literature. The results are also applied to obtain an upper bound on the error of strain estimation for various studies published in the literature on strain analysis.     

Improved reliability in the interpretation of geochemical measurements by the quantification of uncertainty from sampling

All geochemical measurements require the taking of field samples, but the uncertainty that this process causes is often ignored when assessing the reliability of the interpretation, of the geochemistry or the health implications. Recently devised methods for the estimation, optimisation and reduction of this uncertainty have been evaluated by their application to the investigation of contaminated land. Uncertainty of measurement caused by primary sampling has been estimated for a range of six different contaminated land site investigations, using an increasingly recognized procedure. These site investigations were selected to reflect a wide range of different sizes, contaminants （organic and metals）, previous land uses （e.g. tin mining, railway sidings and gas works）, intended future use （housing to nature reserves） and routinely applied sampling methods. The results showed that the uncertainty on measurements was substantial, ranging from 25% to 186% of the concentration values at the different sites. Sampling was identified as the dominant source of the uncertainty （〉70% of measurement uncertainty） in most cases. The fitness-for-purpose of the measurements was judged using the optimized contaminated land investigation （OCLI） method. This identifies the optimal level of uncertainty that reduces to overall financial loss caused by the measurement procedures and the misclassification of the contamination, caused by the uncertainty. Generally the uncertainty of the actual measurements made in these different site investigations was found to be sub-optimal, and too large by a factor of approximately two. The uncertainty is usually limited by the sampling, but this can be reduced by increasing the sample mass by a factor of 4 （predicted by sampling theory）. It is concluded that knowing the value of the uncertainty enables the interpretation to be made more reliable, and that sampling is the main factor limiting most investigations. This new approach quantifies this problem for the first time, and allows sampling procedures to be critically evaluated, and modified, to improve the reliability of the geochemical assessment.