地图数字化与汉字数字化的关系

通过论述汉字信息在地图信息中的重要地位,说明开发地名数字化系统的必要性;并且通过分析汉字的“音、形、义”的结构特征,阐明了地名数字化系统的继承性、层次性、稳定性和开放性。从而说明开发地名数字化系统的艰巨性。     

GIS专题数据库中多层注记重叠问题的解决与自动配置

GIS专题数据库中面状对象的注记一般会自动配置在图形的重心位置。当同一个面状对象在多个数据层中被赋予不同的属性定义时,注记符号和文字将会重叠在同一个位置。当使用的GIS建库软件存在这方面的缺陷时,解决多层注记重叠、自动重新配置注记符号这一命题就显得至关重要。本文以张家界市武陵源城镇地籍数据为例,从多边形形状度量入手,给出基于Delaunay三角网法的骨架线提取算法,较好地解决了多数据层注记重叠和注记符号自动配置问题,提高了工作效率。     

双参数云物理方案中谱形参数作用分析和数值模拟试验

云物理参数化方案中,各种粒子通常采用Г谱分布函数n(D)=N0Dαexp(-λD)。双参数方案中谱参数截距N0和斜率λ通过预报给出,谱形参数α设为固定值。为了讨论谱形参数的作用,理论上分析了谱形参数取值对沉降过程和微物理源汇项的影响。利用MM5模式中增加的双参数显式云物理方案模拟了西北地区一次层状云降水过程,模拟针对雨滴谱的谱形参数rα不同取值分别做了试验。模拟结果基本符合理论分析,谱形参数rα变化时模拟出的地面降水和云的宏微观特征有差异。     

How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.     

基于分区间泛化Kriging近似模型的船舶局部结构形状优化

为提高Kriging近似模型在船舶结构性能多维度响应预测方面的适用性,对常规Kriging近似模型进行分区间泛化改进:一是对设计样本点的各个维度(分量)进行划区,并在每一个分区间内采用最优拉丁超立方(OLhd)取样;二是引入比例系数w1组合高斯与指数型相关函数提高模型对数据的泛化能力,从而在每个划分的区间内建立泛化的Kriging近似模型。通过SCH测试函数,验证了构造的分区间泛化Kriging模型有效性。结合参数化建模和改进Kriging近似模型对某过渡肘板和舱口角隅边界进行形状优化,优化第一阶段由改进的近似模型通过多岛遗传算法得到全局初步的最优解,第二阶段在初步解的基础上缩小优化变量范围,由少量的FEM计算即可在小范围内搜寻到精确的最优设计变量。结果表明:分区间泛化Kriging近似模型在预测多维度响应时较常规Kriging模型预测精度更高;分阶段的形状优化流程在保证极小误差和缩小计算成本的情况下能够得到理想的应力分布和重量优化结果,有助于船舶结构的轻量化研究。     

吉林省村域尺度下居民点空间分布特征及优化重组模式

乡村聚落的空间优化与重构是提高土地资源利用效率,改善农村生产生活条件,促进乡村可持续发展的重要手段。以吉林省为例,采用核密度估计方法和景观形状指数分析了农村居民点空间分布特征,基于农户调查数据估算了吉林省不同区域的农村宅基地闲置情况,将农村居民点长期存在的“破碎化”和日益突出的“空心化”相结合,提出了在行政村尺度下农村居民点优化重组的“整小填大”新模式。结果表明：① 吉林省农村居民点规模小且零散分布,尤其中部呈破碎化分布,形态不规则,具有较大的整治潜力;② 吉林省农村宅基地平均闲置率为18.32%,西部地区最高（24.48%）,分别高于东部和中部地区约6%和12%;③“整小填大”模式可使农村居民点数量减少44.6%,增加有效耕地面积1 046.66 km²。     

空间构件形位检测方法与技术进展

精密工程与工业测量技术应用领域拓展及其与工业计量测试技术的交叉融合,衍生出"空间构件形位检测"技术、方法与系统。本文详细论述了"空间构件"与"形位检测"的定义及范畴,依测量原理将大尺寸空间构件形位检测技术归纳为正交系测量系统、空间支导线测量系统、三角法测量系统和球坐标法测量系统等,综述了各类测量系统和软件的技术进展,分析指出了狭长或超大空间、恶劣环境、目标动态变化等条件下的形位检测难题。     

锢囚气旋钩状云区暴雪过程的水汽源地及输送分析

利用常规高空、地面观测资料、FY-2E卫星云图和NCEP再分析场,分析了2013年11月25日发生在中国东北东部的暴雪天气过程,并用HYSPLIT模式模拟了暴雪区上空气块的轨迹。结果表明:卫星云图显示暴雪发生在锢囚气旋的钩状云区中,且具有中尺度特征。钩状云区不同代表点、不同层次25日08时120 h气块的后向轨迹计算结果表明,在每个代表点的6条轨迹中,只有1条轨迹来自新疆以西地区的对流层上层,其他5条轨迹均来自蒙古国或我国北方地区的对流层中低层。几乎每条轨迹对应的气块在东移或南移时先以水平运动为主,伴有弱的下沉;中低层气块在72～24 h经过渤海湾和日本海;而中上层气块则主要经过黄海或东海,到达降雪区前几小时气块移速快并有明显的上升运动。对钩状云区不同代表点1500和3000 m上空120 h后向轨迹中气块湿度分析表明,来自东亚大陆的气块水汽含量并不大、相对湿度也小于60%,但在经过渤海湾和日本海时,海气交换使得气块的含水量和相对湿度均呈增加的趋势;特别是气块途径日本海的时间和距离越长,水汽含量越多。因此暴雪区的水汽主要来自日本海,其次是渤海湾。在降雪发生前几小时,气块随偏南风或东南风快速北移,相对湿度接近饱和并伴有上升运动,从而引起降雪。     

动力相似法在一次大暴雨过程中的应用

利用NCEP再分析资料、ECWMF预报风场和历史降水量资料,分别采用前人提出的相似量和本文改进的相似量进行动力相似选择试验。结果表明:改进后的相似量的相似选择效果最好。对于南充2012年7月4日区域大暴雨过程,用改进相似量筛选出与此次过程最相似的历史个例,进行对比分析后,发现最相似个例风场与预报风场在形状、强度和影响系统空间配置都很相似,降水实况接近。表明最相似个例的风场和降水资料对该次大暴雨过程的降水量级、落区预报有较高的参考和指示意义。     

Performance of shape indices and classification schemes for characterising perceptual shape complexity of building footprints in GIS

Shape characterisation is important in many fields dealing with spatial data. For this purpose, numerous shape analysis and recognition methods with different degrees of complexity have so far been developed. Among them, relatively simple indices are widely used in spatial applications, but their performance has not been investigated sufficiently, particularly for building footprints (BFs). Therefore, this article focuses on BF shape characterisation with shape indices and classification schemes in a GIS environment. This study consists of four phases. In the first phase, the criteria for BF shape complexity were identified, and accordingly, benchmark data was constructed by human experts in three shape complexity categories. In the second phase, 18 shape indices were selected from the literature and automatically computed in GIS. The performance of these indices was then statistically assessed with histograms, correlation matrix and boxplots, and consequently four indices were found to be appropriate for further investigation. In the third phase, two new indices (Equivalent Rectangular index and Roughness index) were proposed with the objective to measure some BF shape characteristics more efficiently. The proposed indices also were found to be appropriate with the same statistical assessment procedures. In the final phase, BF shape complexity categories were created with the pairs of six appropriate indices and four choropleth mapping classification schemes (equal intervals, natural break, standard deviation, and custom) in GIS. The performance of the index–scheme pairs was assessed against the benchmark data. The findings demonstrated that both new indices and two of the selected indices (Convexity and Rectangularity) delivered higher performance. The custom classification scheme was found more ideal to reveal absolute shape complexity with the index value ranges derived from the boxplots while the other classification schemes were more appropriate to reveal relative shape complexity.