中国南海夏季风强、弱年多尺度相互作用能量学特征

中国南海夏季风为东亚季风的主要系统之一,其具有多重尺度特征,除季节平均环流场外,低频（季节内振荡）和高频（天气尺度）扰动也十分活跃,各尺度系统存在明显的年际变化。该研究使用ERA-Interim和NCEP/NCAR两套再分析资料,从季风平均动能（MKE）诊断的角度出发,探讨了1979-2010年中国南海夏季风环流年际变化的能量来源及其和扰动场的相互作用过程。结果表明:中国南海夏季风对流活跃年份,中国南海南部（12°N以南）及中南半岛一带为季风平均动能显著增强区,此与南亚季风区西风急流的增强并向东延伸有关;中国南海北部（12°N以北）及西太平洋为气旋性环流盘踞,季风槽加深。中国南海南部季风平均动能增强的能量源自于扰动动量通量与平均环流的相互作用,强季风年,平均环流失去较少的动能给扰动场（亦即平均环流保留较多的动能）。通过进一步探讨高频（<10 d）及低频（10-90 d）扰动场与平均环流不同分量的（散度、涡度、风垂直切变）相互作用过程,发现季风平均动能的增长主要来自于<10 d扰动与季风平均散度和涡度的相互作用。中国南海北部季风槽区季风平均动能的维持来自于大气热源和平均上升运动的相互作用,但同时有较多的季风平均动能向扰动动能转换,有利于扰动的成长。因此,强季风年,中国南海北部热带气旋生成数目增多,夏季北传的季节内振荡也增强,导致中国南部沿海及华南地区出现较多的灾害天气。      

利用Abel-Poisson径向基函数模型化局部重力场

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。     

均生函数与BP神经网络耦合模拟预测模型(MGF-BP-I)的建立与应用

水文气候因子模拟预测对气候变化研究、农业墒情预报、生态环境改善、水资源合理开发利用等具有一定参考意义。均生函数、BP神经网络及其结合改进方式在模拟预测中各有优点,被广泛应用,但仍有进一步改进空间。针对MGF、MGF-OSR、MGF-OSR-BP等方法粗选因子集、粗选集组合筛选、收敛适应性、精度控制等可改进空间,进一步发挥均生函数和BP神经网络优势,建立了MGF-BP-I模拟预测模型。利用MGF-OSR、MGF-OSR-BP、MGF-BP-I对科尔沁沙地区域平均年降水进行了模拟预测。结果表明,建模期MGF-OSR-BP、MGF-BP-I拟合效果均较好,MGF-BP-I建模阶段最优模式精度优于MGF-OSR-BP,MGF-BP-I整体同时最优模式结果也非常好。检验期,MGF-BP-I检验阶段最优及整体同时最优两种模式拟合效果最好,相比其他模式精度有所提高。MGF-BP-I考虑更加全面,充分发挥了均生函数和BP神经网络优势,精度远高于MGF-OSR和MGF-OSR-BP,MGF-BP-I整体同时最优模式更符合实际应用,效果理想,可用于水文气候因子模拟预测。     

Quality control methods for KOOS operational sea surface temperature products

Sea surface temperature SST obtained from the initial version of the Korea Operational Oceanographic System(KOOS) SST satellite have low accuracy during summer and daytime. This is attributed to the diurnal warming effect. Error estimation of SST data must be carried out to use the real-time forecasting numerical model of the KOOS. This study suggests two quality control methods for the KOOS SST system. To minimize the diurnal warming effect, SSTs of areas where wind speed is higher than 5 m/s were used. Depending on the wind threshold value, KOOS SST data for August 2014 were reduced by 0.15°C. Errors in SST data are considered to be a combination of random, sampling, and bias errors. To estimate bias error, the standard deviation of bias between KOOS SSTs and climatology SSTs were used. KOOS SST data yielded an analysis error standard deviation value similar to OSTIA and NOAA NCDC(OISST) data. The KOOS SST shows lower random and sampling errors with increasing number of observations using six satellite datasets. In further studies, the proposed quality control methods for the KOOS SST system will be applied through more long-term case studies and comparisons with other SST systems.     

A late Holocene winter monsoon record inferred from the palaeo-aeolian sand dune in the southeastern Mu Us Desert, northern China

The variation of the Asian winter monsoonal strength has seriously affected the climate and environmental conditions in the Asian monsoonal region, and even in marginal islands and the ocean in the East Asian region. However, relevant understanding remains unclear due to the lack of suitable geological materials and effective proxies in the key study areas. Here, we present a grain-size record derived from the palaeo-aeolian sand dune in the southeastern Mu Us Desert, together with other proxies and OSL dating, which reflect a relatively detailed history of the winter monsoon and abrupt environmental events during the past 4.2 ka. Our grain-size standard deviation model indicated that >224 μm content can be considered as an indicator of the intensity of Asian winter monsoon, and it shows declined around 4.2-2.1 ka, enhanced but unstable in 2.1-0.9 ka, and obviously stronger since then. In addition, several typical climate events were also documented, forced by the periodic variation of winter monsoonal intensity. These include the cold intervals of 4.2, 2.8, 1.4 ka, and the Little Ice Age (LIA), and relatively warm sub-phases around 3.0, 2.1, 1.8 ka, and the Medieval Warm Period (MWP), which were roughly accordant with the records of the aeolian materials, peat, stalagmites, ice cores, and sea sediments in various latitudes of the Northern Hemisphere. Combined with the previous progresses of the Asian summer monsoon, we preliminarily confirmed a millennial-scale anti-correlation of Asian winter and summer monsoons in the Late Holocene epoch. This study suggests that the evolution of the palaeo-aeolian sand dune has the potential for comprehending the history of Asian monsoon across the desert regions of the modern Asian monsoonal margin in northern China.     

山东黄金西岭勘查区深部勘探孔防斜与纠斜措施

西岭勘查区金矿找矿工作已全面进入勘探阶段,勘查区网度为80 m×80 m,对于钻孔质量要求十分严格：终孔靶点偏差不超过勘探网度的四分之一,即不超过20 m。对于西岭勘查区设计孔深均超过1500 m（部分钻孔设计甚至超过2500 m）的钻孔而言,这种要求远远超过地质岩心钻探规程要求。山东黄金地勘公司根据多年深孔施工经验,在防斜与纠斜方面均取得了一些突破,自主研发了钻具扶正器、独创了钻孔纠斜法,形成了一套实用的钻孔质量保证措施。     

哈萨克斯坦科扎萨伊油田优快钻井技术

哈萨克斯坦科扎萨伊油田钻井地质环境复杂,储层位于盐下,钻遇的地层层系多,地层性质差异大,具多套压力系统。钻井过程中发生地层漏失、坍塌、掉块及盐膏层蠕变等复杂情况,严重影响了钻井时效和钻井安全。针对这些技术难题,开展了油田井身结构、井身质量、提速潜力、高效钻头等分析与优化,提出了预弯曲钻具高倾角地层井斜控制技术、混合钻头减震提速技术,以及PDC-孕镶块复合钻头高研磨性地层提速技术。现场应用取得了较好的效果,平均机械钻速提高50%以上,钻井周期缩短28%。     

旋挖钻机在特殊工况中的减压钻进研究

为解决旋挖钻机在脆性岩层或者软硬交替地层等特殊工况中加压钻进出现的钻机高频高幅振动和钻孔极易倾斜等问题,对旋挖钻机入岩的碎岩机理进行分析,找出加压钻进产生问题的原因。对减压钻进施工工艺进行研究,提出实现方式及适用范围,并进行实际工程应用,验证了旋挖钻机使用减压钻进施工的可行性。应用结果表明,特殊工况下减压钻进对降低设备的入岩振动、提高设备的结构稳定性以及保证成孔质量都具有重要作用。     

随钻测斜技术现状与发展趋势

在桩基领域,随着基础设施建筑对桩基础承载能力和桩孔垂直度的质量控制要求越来越高,现有常规桩基成孔监测技术已不能满足要求;在钻探领域,随着深井、超深井、科学钻探井及水平井的成井要求越来越高,由于地层因素、工艺技术等导致的实际钻孔轨迹偏离设计轨迹的井斜问题愈发突出,井斜的监控变得越来越严格,现有仪器已不能很好地满足钻孔轨迹测量的高精度要求。针对上述问题,本文梳理了随钻测斜技术发展现状,并结合地质岩心钻探、旋挖桩孔施工工艺特点,提出实现绳索取心钻探钻孔轨迹和大直径长钻孔灌注桩孔垂直度高精度实时监测的方案,这一思路的推广将对指导施工操作、保证钻孔/桩孔的整体质量产生积极影响。     

Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.