Extended consecutive modal pushover procedure for estimating seismic responses of one-way asymmetric plan tall buildings considering soil-structure interaction

Performance based design becomes an effective method for estimating seismic demands of buildings. In asymmetric plan tall building the effects of higher modes and torsion are crucial. The consecutive modal pushover (CMP) procedure is one of the procedures that consider these effects. Also in previous studies the influence of soil-structure interaction (SSI) in pushover analysis is ignored. In this paper the CMP procedure is modified for one-way asymmetric plan mid and high-rise buildings considering SSI. The extended CMP (ECMP) procedure is proposed in order to overcome some limitations of the CMP procedure. In this regard, 10, 15 and 20 story buildings with asymmetric plan are studied considering SSI assuming three different soil conditions. Using nonlinear response history analysis under a set of bidirectional ground motion; the exact responses of these buildings are calculated. Then the ECMP procedure is evaluated by comparing the results of this procedure with nonlinear time history results as an exact solution as well as the modal pushover analysis procedure and FEMA 356 load patterns. The results demonstrate the accuracy of the ECMP procedure.     

青藏高原典型植被生长季遥感模型提取分析

物候变化是衡量全球气候变化最直接、敏感的指示器,针对青藏高原这个独特地域单元上特殊的高寒植被进行关键物候期遥感提取模型及植被物候时空变化的研究具有重要的意义。本文首先以反距离加权空间插值算法与Savitzky-Golay滤波算法相结合的数据重建模型获得高质量2003-2012年青藏高原MODIS归一化植被指数(NDVI)数据。在此数据基础上,分别利用动态阈值法、最大变化斜率法、logistic曲线拟合法3种遥感植被生长季提取模型,对青藏高原地区两种典型植被的生长季(SOS生长季开始期,EOS生长季结束期,LOS生长季长度)进行提取。通过对3种模型提取结果的对比分析,并结合日均温模型对提取结果的验证发现,动态阈值法为青藏高原地区典型植被生长季的最优遥感提取模型。该模型对近10 a的高分辨率典型高寒植被物候参量的反演及时空变化特征分析表明,受青藏高原水热及海拔梯度的影响,青藏高原植被物候变化呈现出从东南向西北的空间分异规律,随春季温度的升高,近10 a来青藏高原高寒草地总体呈现生长季开始期(SOS)提前(0.248 d/a)的趋势。     

Geochemical baseline of trace elements in the sediment in Dexing area,South China

A baseline might be used as a point of reference to monitor change from some specific data without concern for whether the baseline determination is natural or has been changed by human activity. We selected 326 sediment samples from Dexing area, South China, and analyzed for 17 chemical elements. The geochemical baseline was predicted with the method of the normalization procedure combined with the relative cumulative frequency curve. The results indicate Al was the best reference element for the normalization procedure among four potential reference elements (Al, Fe, Ti, and Mn). The baseline value range obtained from the normalization procedure method included both the regional geochemical background of the sediment and the median value of the measured contents. The median value of baselines obtained from relative cumulative frequency method was lower than that obtained from normalization procedure method. In contrast to the geochemical patterns of heavy metals in 1987, the spatial distribution of anomalies sprawled in 2004 in study area, especially for Cu, Pb, Zn, Cd, As, Fe, and Cr.     

黄土高原植被生长期旱涝对全球气候变化响应

为了揭示黄土高原植被生长期降水演变特征,主要采用EOF分解和小波分析等方法,利用黄土高原区域51站1961—2000年降水资料,研究植被生长期降水早涝特征,分析和比较了干年和湿年降水。结果表明：区域响应以一致的涝或旱为主,高原中北部为响应最敏感区;时间演变中1971年之前相对多雨,1985年后明显变旱,存在3～5a、8a左右的年际振荡,3～5a周期明显;高原东北部是干年降水响应最敏感区,是干旱最突出的地方：高原北部是湿年降水响应最敏感区,是降水偏多最突出的地方(易涝);早年降水响应中局地性较强,湿年降水响应以全区一致为主。     

我国出口加工区的成长动因与主要类型

出口加工区是一种从事加工贸易特定封闭区域。随着对外开放的不断深入,我国出口加工区已进入到一个快速发展时期。文章分析了我国已有和在建的出口加工区的发展情况和成长动因,并结合不同的建设条件和运作特点,划分出了若干类型,探讨了今后一个时期的战略方向。     

基于性能的碳纤维抗震加固设计

本文探讨了基于性能的加固设计的基本思路和设计过程,并给出了一个基于性能的碳纤维加固设计的工程实例,采用pushover静力推覆分析的方法分析对比了结构加固前后的性能,表明原结构的抗震性能不足,经碳纤维加固后的结构抗震性能明显提高,满足8度抗震设防烈度要求。     

大跨预应力混凝土框架结构的静力弹塑性(pushover)分析

基于美国规范ATC-40和N2方法,建立了大跨预应力混凝土框架结构竖向地震反应的静力弹塑性(pushover)分析方法。编制了预应力混凝土构件截面弯矩-曲率的计算程序。这些为评价大跨预应力混凝土框架结构的竖向抗震能力提供了有益的参考。结合具体工程实例进一步说明了该方法的实施步骤。     

A voluntary reduction in the commercial catch of rock lobster (Jasus edwardsii) in a New Zealand fishery

We describe the development and application of a management procedure (decision rule) that resulted in a voluntary reduction in the commercial catch of spiny rock lobster (Jasus edwardsii) in the lower east coast of North Island of New Zealand. The management procedure was developed from an accepted assessment of the CRA 4 (Wellington‐Hawke's Bay) fishery, which used an integrated length‐based assessment model fitted to commercial fishery catch‐per‐unit‐effort (CPUE) biomass indices, commercial length‐frequency data, and tag‐recapture data. The assessment model had been Bayesian, and used the joint posterior distribution of parameters to predict the effect of 384 alternative harvest control rules on the future size of the CRA 4 stock. The harvest control rules all used CPUE as their input, and generated annual changes in catch, which were then simulated by the population dynamics of the operating model. Uncertainty was added to evaluations through observation error, added to the simulated CPUE observations, and stochastic serial auto‐correlation variation in recruitment. We describe how this management procedure was used to effect a voluntary reduction in catch to address the problem of a rapidly declining population.     

协同多源遥感数据的北亚热带森林蓄积量贝叶斯分层估测

精确估算森林蓄积量是国家实现2060年前碳中和目标的迫切需求,而基于遥感的森林蓄积量定量反演是当前遥感应用领域面临的重要挑战和研究热点.光学遥感数据由于无法获取森林高度信息并存在信号饱和问题,反演森林蓄积量的精度较低,而机载Lidar数据能获取高度信息,但成本高、观测范围有限.本研究利用Sentinel-2多光谱、资源...     

Feldspar multi-elevated-temperature post-IR IRSL dating of the Wulanmulun Paleolithic site and its implication

The Wulanmulun site found in 2010 is an important Paleolithic site in Ordos (China), from which lots of stone and bone artifacts and mammalian fossils have been recovered. It was previously dated by radiocarbon and optically stimulated luminescence (OSL) techniques on quartz. To further confirm the reliability of the chronology constructed based on OSL ages and test the applicability of the recently developed pIRIR procedure on sediments from northern China, twenty-four sediment samples (including eolian, lacustrine and fluvio-eolian sands) from the site were determined using the multi-elevated-temperature post-IR IRSL (MET-pIRIR or pIRIR) procedure on potassium feldspar. The results show that the studied samples have two MET-pIRIR D_e preheat plateaus (280–320 and 340–360 °C), and the bleaching rates of the luminescence signals are associated with sample ages and stimulation temperatures. All the pIRIR ages (7–155 ka) corrected for anomalous fading and residual dose obtained after solar bleaching for 15 h are larger than the corresponding quartz OSL ages (4–66 ka) previously determined, even for the young eolian samples (<10 ka). But the corrected IRSL(50 °C) ages (6–85 ka) are broadly consistent with the quartz ages. It appears that the IRSL(50 °C) ages are more reliable, although this contradicts the previously results obtained by other people. On the other hand, we also obtained an extended age plateau between the stimulation temperatures of 50 and 290 °C in the plot of age versus stimulation temperature (A-T plot) by subtracting different residual doses obtained after different bleaching times. The reliability of the plateau ages requires further investigation. For the sediment samples from this site, quartz should be more suitable for dating than K-feldspar, and the quartz OSL ages of 50–65 ka for its cultural layer should be reliable.