顶管施工中顶力与顶程关系及其影响因素分析

以上海某长距离急曲线顶管工程为例，通过现场实测4节管段顶进过程中的顶力，研究了顶力随顶程的变化规律，系统分析了顶进过程中顶力的主要影响因素，得到了一些有用的结论。     

山丘型地区钉螺孳生数量与植被和土壤环境因子的关系

本文研究了四川仁寿山丘型地区钉螺孳生与植被和环境因素的关系。结果表明:(1)草本群落物种丰富度、草本盖度、草本高度影响钉螺的孳生数量,钉螺分布适宜的草本群落的物种丰富度为4～14,草本群落盖度为60%～100%,高度为20～50cm;(2)土壤水分含量、温度和盐分均影响钉螺的孳生数量,钉螺分布最适宜的土壤水分含量为20%～60%,温度为15～30℃,盐分为60～120ms/m;(3)各环境因子和钉螺密度曲线可以看出,物种丰富度、草本高度、草本盖度、土壤水分含量、土壤温度和盐分含量与钉螺密度间均呈现抛物线或抛物线状曲线;(4)在样地和样方水平,土壤水分含量和钉螺密度存在稳定的线性相关关系,表明土壤水分含量是影响钉螺孳生的主导因素。因此,钉螺对各环境因素存在适应范围,表明钉螺对潮湿环境具有严格的选择性和依赖性,这种生态特性和钉螺本身的生物学特征密切相连。     

Powder factors in asymmetric blast patterns

A cell powder factor defines the local powder factor in a simple geometric procedure that accounts for the charge in each blast hole and the triangulation formed by blast hole collars in a blast pattern. In the case of asymmetric blast patterns, the cell powder factor deviates from the global powder factor. Poor drilling of blast hole collars produces significant variation in the cell powder factor, more so, than does poor blast hole charging. The cell powder factor does not account for timing within a blast and does not easily handle non-parallel blast hole configurations. The cell powder factor is best used as a design or audit tool before blast holes are loaded. It gives the opportunity to correct for poor drilling and/or poor charging practices prior to firing a blast.     

River bank erosion control by soil nailing

A study has been done for analysing soil nailed cuts with circular type wedge failure by friction circle method. Various parameters such as nail length, nail diameter, nail inclination, wall inclination and angle of internal friction of soil have been considered to determine the factor of safety of nailed open cuts. The study shows that for cohesionless soil nailed cut, factor of safety increase with increase of parameters like angle of internal friction of soil, length of nail (L) versus height of cut (H) ratio, cohesion of soil and nail inclination (upto 15°) with horizontal. The study revealed that nails grouted with cement perform better than driven nails. A case study further confirms the analytical findings. Received 7 October     

Break out resistance of inclined anchors in sand

Inclined anchors are widely used in a variety of civil engineering problems to resist oblique loads, most relevant being in transmission towers and in rocks and dams for structural strengthening. In the present study, the breakout resistance of the inclined anchors in sand has been worked out using limit equilibrium approach. The breakout resistance has been calculated for different soil friction angles with varying relative depth ratio and anchor inclination. The break out factor increases continuously with the inclination of the anchor. A comparison of predicted values of break out resistance of anchors by the proposed analysis with the experimental values as reported by the other researchers showed reasonably good agreement.     

用强度折减法和FLAC^3D计算边坡的安全系数

对采用强度折减法和FLAC^3D计算边坡的安全系数问题进行了研究。对边坡破坏的判断标准、边坡滑面位置的确定及计算参数对安全系数计算结果的影响进行了分析。结果表明，用FLAC计算时，边坡的破坏可以通过节点最大不平衡力突变、节点最大速度突变、特定点位移的不收敛等特征进行判断，同时边坡破坏的滑面也可以由速度等值线图等方法表示出来。另外，通过分析发现，弹性常数、剪胀角等参数对安全系数计算结果的影响不大。     

我国高寒草甸植被生产力及其影响因子

生物量是重要的植物群落数量特征，直接反映生态系统生产者的物质生产量，是生态系统生产力的重要体现。高寒草甸广泛分布于青藏高原，是高寒生态系统的主要植被类型。回顾了高寒草甸生物量的研究成果。高寒草甸生物量呈典型的金字塔式垂直分布格局，地上生物量主要集中于0—10cm的冠层，地下生物量也集中分布于0—10cm的土层内。增温和多雨会降低生物量，叶面积和物种丰富度与地上生物量成正相关关系，氮素的增加有助于植被生物量的增长，而放牧率与生物量成显著负相关。     

Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003     

大湾铀矿田铀-镭平衡系数及迁移富集特征研究

从分析大湾铀矿田各矿床(点)的铀镭平衡系数变化特征出发,结合放射性同位素比值特征分析铀镭迁移富集行为,指出了各矿床(点)氧化带的深度,以了解各铀矿床(点)潜在的工业价值.     

滑坡稳定性分析与安全系数取值研究

在地质灾害中,滑坡灾害分布最广、发生频率最高、危害最大,是我国地质灾害防治的主要对象。滑坡研究的主要任务之一是稳定性分析。论文针对三板溪水电站进水口滑坡和水布垭水电站大岩淌滑坡,分别采用刚体极限平衡法、块体单元法、有限单元法对稳定安全系数和条间推力分布曲线进行分析和比较,研究各种方法的差异和计算精度,以及各种方法稳定安全系数的取值标准,希望为水利水电工程边坡设计规范有关有限单元法、块体单元法条目的编写和相应的允许安全系数取值标准的制定提供一定的参考。研究结果表明:①块体单元法计算的安全系数与刚体极限平衡法计算的安全系数可以采用相同的取值标准,而有限单元法计算的安全系数取值标准可适当降低;②块体单元法计算的条间水平推力、条间剪切力与刚体极限平衡法(尤其是Sarma法)计算的条间水平推力、条间剪切力非常相近,有限单元法计算的条间水平推力、条间剪切力较小;③分析方法、力学模型与参数取值应与安全系数取值标准相匹配。