Tsunami waves struck the Indian coast on 26th December 2004 affecting the Andaman and Nicobar group of islands. A quick assessment of the status of the vital coastal ecosystems has been made using pre- and post-tsunami Advance Wide Field Sensor (AWiFS) data of Indian satellite RESOURCESAT with an accuracy of 87–90% and the Kappa ranging from 0.8696 to 0.9053. Among the coastal ecosystems the coral reefs have suffered the maximum with the Nicobar reefs (69% eroded and 29% degraded) bearing the brunt more than the Andaman reefs (54% eroded and 22% degraded). Significant improvement to the condition of the reef damaged due to backwash has been noted. About 41% of the Sentinel reef area has undergone significant improvement. The continuance of the erosion of the southwestern Andaman reefs is due to the impact of recurring earthquakes. The impact on mangroves of both the groups of islands has been due to uprooting as well as inundation of seawater and resulting stagnation. Changes are expected in community structure of mangroves as a result of tsunami. 相似文献
The volcanic residuals of the Gawler Ranges together form an extensive massif that in its gross morphology differs markedly from most exposures of silicic volcanic rocks. The upland developed in two stages, the first involving differential fracture‐controlled subsurface weathering, the second the stripping of the regolith. As a result, an irregular weathering front was exposed, with domical projections prominent. These bornhardts are etch forms, and they are of considerable antiquity.
The differential weathering of the rock mass reflects the exploitation of various fracture systems by shallow groundwaters. Orthogonal fracture systems at various scales, sheet fractures and columnar joints control the morphology of the bornhardts in gross and in detail.
The exploitation of the structural base, which was established in the Middle Protero‐zoic, probably took place throughout the Late Proterozoic and the Palaeozoic, though only minor remnants of the Proterozoic land surface remain. The major landscape features developed during the Mesozoic. The weathering which initiated the bornhardts occurred in the Jurassic or earlier Mesozoic, and the landforms were exposed in Late Cretaceous to Early Tertiary times.
Though structural forms dominate the present landscape, some major and some minor landforms are best explained in terms of climatic changes of the later Cainozoic. The palaeodrainage system, established under humid conditions by the Early Tertiary, was alluviated during the Cainozoic arid phases, and salinas were formed. The sand dunes of the region also reflect this aridity. 相似文献
The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence. 相似文献
Longitudinal (linear) sand dunes of the Simpson and Strzelecki dunefields in eastern central Australia present a paradox. Low levels of activity today stand in contrast to luminescence dating which has repeatedly shown deep deposits of sand on dune crests dating to within the late Holocene. In order to investigate the nature of dune activity in the Simpson–Strzelecki dunefield, vegetation and sand mobility were investigated by detailed vegetation survey and measurement of rippled area and loose sand depth of dunes at three sites along a climatic gradient. The response of both vegetation and sand movement to inter-annual climate variability was examined by repeat surveys of two sites in drought and non-drought conditions. Projected plant cover and plant + crust cover were found to have inverse linear relationships with rippled area and the area of deep loose sand. No relationship was found between these measures of sand movement and the plant frontal area index. A negative exponential relationship between equivalent mobile sand depth on dune surfaces and both vascular plant cover and vascular + crust cover was also found. There is no simple threshold of vegetation cover below which sand transport begins. Dunes with low perennial plant cover may form small dunes with slip faces leading to a positive feedback inhibiting ephemeral plant growth in wet years and accelerating sand transport rates. The linear dunefields are largely within the zone in which plant cover is sufficient to enforce low sand transport rates, and in which there is a strong response of vegetation and sand transport to inter-annual variation in rainfall. Both ephemeral plants (mostly forbs) and crust were found to respond rapidly to large (> 20 mm/month) rainfall events. On millennial time-scales, the level of dune activity is controlled by vegetation cover and probably not by fluctuations of wind strength. Land use or extreme, decadal time-scale, drought may destabilise dunes by removing perennial plant cover, accelerating wind erosion. 相似文献
1 INTRODUCTION Because of the large quantity of sand and gravel in their beds, rivers have always been considered as a major source of sand and gravel for civil works. Acceptable quality, ease of extraction and economy are some of the reasons could be mentioned. Unfortunately, specific laws and regulations regarding the safe in-stream mining have not been provided for users and officials. What should be taken into account are the effects of over-mining of sand and gravel, which can cause … 相似文献
Samples of dune sands, surveys of the morphology and field measurements of wind velocity and direction of a simple linear dune in Taklimakan Sand Sea show that the airflow and sand flux vary with the change of wind direction on the dune surface. Decrease of the airflow stress on the lee flank does not result in much decrease of the sand flux because of the low threshold shear velocities and the airflow conditions. There are no significant relations between the sand flux on the lee flank and the angle of incidence of the airflow. The low threshold shear velocities and the maintenance of the sand flux at the lee flank are the main mechanisms keeping the linear shape of the dunes. Measurements of the sand flux shows that it reaches a maximum on the crest of the dune. The grain size of the transported sands has some differences compared to that of the dune surface. The sands transported are finer than that on the dune surface, but better sorted under the influence of the medium to low wind activity. The field experiment results exhibit that it is possible for the dunes to be shaped as linear dunes during the processes of accumulation and elongation. 相似文献
We present measurements of wind velocity and sand flux performed on the windward side of a large barchan dune in Jericoacoara, northeastern Brazil. From the measured profile, we calculate the air shear stress using an analytical approximation and treat the problem of flow separation by an heuristic model. We find that the results from this approach agree well with our field data. Moreover, using the calculated shear velocity, we predict the sand flux according to well-known equilibrium relations and with a phenomenological continuum saltation model that includes saturation transients and thus allows for nonequilibrium conditions. Based on the field data and theoretical predicted results, we indicate the principal differences between saturated and nonsaturated sand flux models. Finally, we show that the measured dune moves with invariant shape and predict its velocity from our data and calculations. 相似文献
Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p0<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress. 相似文献