流变学:构造地质学和地球动力学的支柱学科

地球是一动态系统,其各层圈的构造运动归根到底就是多矿物复合岩石在各种物理条件(例如,温度、围压、差应力、应变速率、应变方式等)下和化学环境(例如,氧逸度和水含量)中的形变。流变学作为研究岩石力学性质和变形行为的科学,现已成为地球动力学和构造地质学的支柱学科。本文对国际上近年来岩石流变学的最新进展做些扼要的介绍,呼吁中国固体地学界加强流变学的研究,做出经得起时间淘洗、实践检验的原创性成果来,使中国的构造地质学研究迈进国际先进的行列。     

祁阳山字型构造质疑

结合区域构造演化背景及构造变形特征,对祁阳弧形构造的形成机制进行研究。分析表明,传统山字型构造机制难以解释祁阳弧形构造的诸多特征,且前人认为变形动力来源于东西向挤压应力场,也与印支期区域构造应力场实为NWW向的构造背景不符,因此祁阳弧形构造并不属典型山字型构造。基于研究区构造活动的客观实际,提出祁阳弧形构造的可能形成机制:NW向基底隐伏断裂和NNE-NE向主干断裂分别于印支期和燕山期产生强烈左旋走滑活动,从而使区域NNE向构造线在中段产生左旋偏转成为NNW向,从而形成S形的祁阳弧形构造。这一机制可较好解释祁阳弧形构造的若干特征,如关帝庙穹窿呈NWW走向、北反射弧构造形迹不显著、北弧弧顶脱位及内弧曲率大于外弧、南弧弧顶脱位、紫云-中田-高峰串珠状穹窿的形成等。上述认识对华南地区弧形构造研究具有一定启示意义:除山字型构造作用和砥柱作用外,还应注意断裂走滑等其他构造活动对弧形构造的制约,以及多次构造活动叠加对构造形迹可能造成的影响。     

再论南岭侏罗纪“铝质”A型花岗岩的成因及其对古地温线的制约

对南岭地区侏罗纪4个典型"铝质"A型花岗岩岩基——柯树北、寨背、西山和南昆山的成因分析表明:柯树北、寨背岩基中的低分异花岗岩SiO2≈70%,A/CNK<1.1,CaO≥1%,高Zr、Ba含量,是下地壳部分熔融产物;而SiO2含量较高者由低分异花岗岩岩浆通过分离结晶演化而来。西山花岗质火山-侵入杂岩也是下地壳部分熔融产物。南昆山花岗岩为高硅花岗岩,贫Zr、低Ba、Sr和Eu/Eu*值,但具有高的Nb、Ga、REE含量和Ga/Al比值,在Whalen等(1987)图解中地球化学参数落在A型花岗岩区域内。碱性玄武岩浆分离结晶的成岩模式无法解释南昆山岩基较大的体积、均一的成分和低的Nb/Ta比值。详细的成岩分析表明,南昆山花岗岩可能是先期侵入的(幔源)碱性正长岩在富水和相对低温低压条件下发生部分熔融的产物。由这些"铝质"A型花岗岩的熔融温压条件估算得出热流值达到80~95mWm-2的南岭地区侏罗纪古地温线。由古地温线推算出的岩石圈厚度45~75km。南岭侏罗纪高热流背景及其对应的花岗质岩浆活动可能与后碰撞造山阶段岩石圈地幔拆沉或被"热侵蚀"有关,但并不一定意味着岩石圈伸展的大地构造环境。     

神木北部矿区5-2煤层厚度及其底板高程趋势分析

为了查清神木北部矿区5-2煤层赋存特征及成因,选取了该矿区172个典型钻孔数据,用趋势分析法研究了5-2煤层的厚度及其底板高程度变化特征。结果显示:该区煤层厚度总体为南北厚中部薄,东厚西薄;底板高程为南北高中部低,东高西低;煤层厚度和其底板高程间普遍存在正相关关系。在该区构造稳定的背景下,后期改造对煤层厚度及其底板的影响很小,煤层赋存特征主要受沉积与剥蚀的控制。     

安阳矿区双全井田岩性结构与煤体变形的关系

煤体变形程度控制着煤与瓦斯突出和煤层气的可开发性,煤体结构空间展布预测是人们长期关注的焦点。以岩体力学和分形几何学基本理论为指导,以安阳矿区双全井田为例,通过计算岩体强度因子和分形维数,系统探讨了岩性结构对煤体变形的影响。研究表明,岩体强度因子和分形维数与断层和测井曲线判识的煤体结构之间存在密切关系:低强度因子和分形维数区,煤体易发生韧性变形,软煤发育;高强度因子和分形维数区,煤体(和岩体)以脆性变形为主,以断层发育为特征。这一结论为井田构造发育特征和软煤空间展布所证实。岩体力学和分形几何学的引入,为煤体结构空间展布区域预测提供了一种新途径。     

Methodology and use of tensor invariants for satellite gravity gradiometry

Although its use is widespread in several other scientific disciplines, the theory of tensor invariants is only marginally adopted in gravity field modeling. We aim to close this gap by developing and applying the invariants approach for geopotential recovery. Gravitational tensor invariants are deduced from products of second-order derivatives of the gravitational potential. The benefit of the method presented arises from its independence of the gradiometer instrument’s orientation in space. Thus, we refrain from the classical methods for satellite gravity gradiometry analysis, i.e., in terms of individual gravity gradients, in favor of the alternative invariants approach. The invariants approach requires a tailored processing strategy. Firstly, the non-linear functionals with regard to the potential series expansion in spherical harmonics necessitates the linearization and iterative solution of the resulting least-squares problem. From the computational point of view, efficient linearization by means of perturbation theory has been adopted. It only requires the computation of reference gravity gradients. Secondly, the deduced pseudo-observations are composed of all the gravitational tensor elements, all of which require a comparable level of accuracy. Additionally, implementation of the invariants method for large data sets is a challenging task. We show the fundamentals of tensor invariants theory adapted to satellite gradiometry. With regard to the GOCE (Gravity field and steady-state Ocean Circulation Explorer) satellite gradiometry mission, we demonstrate that the iterative parameter estimation process converges within only two iterations. Additionally, for the GOCE configuration, we show the invariants approach to be insensitive to the synthesis of unobserved gravity gradients.     

Prediction of UT1–UTC,LOD and AAM χ<Subscript>3</Subscript> by combination of least-squares and multivariate stochastic methods

This article presents the application of a multivariate prediction technique for predicting universal time (UT1–UTC), length of day (LOD) and the axial component of atmospheric angular momentum (AAM χ ₃). The multivariate predictions of LOD and UT1–UTC are generated by means of the combination of (1) least-squares (LS) extrapolation of models for annual, semiannual, 18.6-year, 9.3-year oscillations and for the linear trend, and (2) multivariate autoregressive (MAR) stochastic prediction of LS residuals (LS + MAR). The MAR technique enables the use of the AAM χ ₃ time-series as the explanatory variable for the computation of LOD or UT1–UTC predictions. In order to evaluate the performance of this approach, two other prediction schemes are also applied: (1) LS extrapolation, (2) combination of LS extrapolation and univariate autoregressive (AR) prediction of LS residuals (LS + AR). The multivariate predictions of AAM χ ₃ data, however, are computed as a combination of the extrapolation of the LS model for annual and semiannual oscillations and the LS + MAR. The AAM χ ₃ predictions are also compared with LS extrapolation and LS + AR prediction. It is shown that the predictions of LOD and UT1–UTC based on LS + MAR taking into account the axial component of AAM are more accurate than the predictions of LOD and UT1–UTC based on LS extrapolation or on LS + AR. In particular, the UT1–UTC predictions based on LS + MAR during El Niño/La Niña events exhibit considerably smaller prediction errors than those calculated by means of LS or LS + AR. The AAM χ ₃ time-series is predicted using LS + MAR with higher accuracy than applying LS extrapolation itself in the case of medium-term predictions (up to 100 days in the future). However, the predictions of AAM χ ₃ reveal the best accuracy for LS + AR.     

沿空掘巷合理煤柱宽度综合分析与确定

在总结分析经验法、理论计算法、数值模拟法、现场实测等确定煤柱宽度方法优缺点的基础上,提出了采用现场实测和数值模拟相结合的方法来确定保留煤柱宽度。根据石炭井二矿生产实际,分别对巷道开挖前后,不同煤柱宽度下围岩应力、变形进行了模拟,同时利用21053工作面异型煤柱的有利条件,对不同煤柱宽度下巷道围岩变形、支护结构受力等进行了实测。经过对监测数据的分析,得出了巷道围岩变形、支护结构受力与煤柱宽度之间的关系,结合数值模拟结果,确定了石炭井二矿煤柱宽度。     

吉林省海沟金矿床的地球化学异常模式

在总结海沟金矿床区域水系沉积物、矿区水系沉积物及矿体的岩石、土壤地球化学异常特征的基础上,建立了海沟金矿床的地球化学异常模式,并依据该模式对区域47个异常进行了研究对比,预测出一处寻找海沟式金矿床的有望异常。     

夏甸地区Ⅶ-支脉矿体控矿构造特征

构造复合现象的研究,不仅有助于解决构造运动时期先后的问题,而且在生产实践中有着重要的实际意义[1]。本文以山东夏甸地区Ⅶ—支脉矿体为例,通过区域构造、Ⅶ—支构造断裂特征、闪长玢岩构造特征、矿体构造特征的系统研究,结果表明:Ⅶ—支构造的新老构造体系、同一构造体系复合现象突出,多表现为构造形迹的归并。其中成矿断裂的多期活动、构造性质的多次变化、成矿作用的多次叠加是矿体形成的关键因素;在NEE向Ⅶ—支构造与近SN向脉岩截接部位形成矿体,低级序的NNE、NE、NEE向构造成为主要的容矿构造。