中国南水北调工程进展综述

论述南水北调工程的调水背景、工程规划、工程特征、环境影响与生态环境保护及其工程综合效益。     

成都市区域化探深层样品元素异常与物探重、磁异常及遥感解译构造的关系

通过深层样化探异常与物探重力、航磁和遥感解译关系的研究,认为深层样元素异常是由隐伏构造指示元素Au、Hg,与重力负异常有关的酸性岩元素Sn、Be、F、Y,与航磁正异常有关的基性岩元素Fe、Co、Ni、V、Cr和与地层有关元素Cd、C、Tl四部分组成;解释了深层样元素异常的原因,开拓出区域化探与区域物探、遥感解译相结合的新路。     

2-[2-(6-氯苯并噻唑)偶氮]-5-二乙氨基苯甲酸与镍的显色反应

研究了2-[2-(6-氯苯并噻唑)偶氮]-5-二乙氨基苯甲酸(6-Cl-BTAEB)与Ni2+的显色反应。结果表明:在pH4.5～7.6的HAc-NaAc缓冲溶液中及十二烷基硫酸钠存在下,试剂与Ni2+形成稳定的蓝紫色配合物,组成为n(Ni2+)∶n(6-Cl-BTAEB)=1∶2,最大吸收波长650nm,表观摩尔吸光系数为1.59×105L·mol-1·cm-1,Ni2+浓度在0～400μg/L内符合比尔定律。用铝合金和合金钢中的微量镍验证该分析方法,所得结果与推荐值相符,6次测定的RSD<2%。     

药用滑石粉酸中可溶物测定方法考察

考察药用滑石粉酸中可溶物测定方法的重复性、耐用性 ,分析主要影响因素。比较酸溶物提取液滤过介质对测定结果差异的影响 ;采用重量法随机测定酸溶物含量和室间差异。两种滤过介质处理对测定结果没有显著差异 ;室间测定结果没有显著差异 ;30批样品平行测定结果的 RSD值范围为 0 %～ 18.2 %。酸中可溶物测定法存在重复性和耐用性不佳的问题 ,应相应调整酸中可溶物含量限度     

Conditions of pocket formation in the Oktyabrskaya tourmaline-rich gem pegmatite (the Malkhan field, Central Transbaikalia, Russia)

Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl₂[AlSi₃O₁₀](OH,F)₂ series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H₃BO₃ contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B₂O₃, 3.64–5.20 wt.% Cs₂O, 0.54 wt.% Li₂O, 0.57 wt.% Ta₂O₅, 0.10 wt.% Nb₂O₅, 0.12 wt.% BeO. The H₂O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H₂O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.

Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H₂O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets.     

侯马市酸雨概况及其气象条件分析

通过对侯马近14a酸雨观测资料分析,发现侯马出现酸雨的概率较大,强度较强,时间变化特征明显,与气象条件关系密切。     

Geochemical characteristics of the metapelites from the Xingxingxia group in the Eastern Segment of the Central Tianshan: Implications for the provenance and paleoweathering

Clastic sedimentary rocks record a number of in-formation about the compositions and paleoweathering conditions of the source areas, and the tectonic setting of the depositional basin[1―6]. The traditionallypetrological study commonly utilizes the major com-ponents (Quartz, Feldspar and Lithics) of the silici-clastic sedimentary rocks to investigate the source rock composition and tectonic setting[7]. However, thepetrological method is somewhat limited, because many of the mafic components f…     

对羟基苯甲酸异丙酯合成的研究

以浓硫酸为催化剂，研究了对羟基苯甲酸和异丙醇合成对羟基苯甲酸异丙酯的工艺条件。对影响产率的因素进行了探讨：实验表明，在以7％的浓硫酸为催化剂，反应温度为120℃，醇酸摩尔比为4：1，反应时间为5h的最佳条件下，合成了羟基苯甲酸异丙脂，通过多次重结晶的方法纯化产品，产率可达85．5％，并通过熔点仪、红外光谱等手段对产品加以表征，验证了产品具有较高的纯度。该法简单、快速、产率高、纯度好，具有较高的实用价值。     

Mechanism of loading on plates due to explosive detonation

This paper investigates the various mechanisms and parameters that are responsible for delivering impulse to a vehicle that is unfortunate enough to detonate a buried mine. Small scale tests are used to examine the effects of air blast or ejected sand in imparting impulse to a plate that is located above the surface of the saturated soil that contains the explosive. Parameters such as confinement, stand off distance, depth of burial of the explosive, density of the soil, and saturation level of the soil are also examined.     

Why asymptotic limit of the acid dissolution capacity can lead to a sharp dissolution front in chemical dissolution of porous rocks?

The use of the asymptotic limit can greatly simplify the theoretical analysis of chemical dissolution front instabilities in fluid‐saturated rocks and therefore make it possible to obtain mathematical solutions, which often play a crucial role in understanding the propagation behavior of chemical dissolution fronts in chemical dissolution systems. However, there has been a debate in recent years that the asymptotic limit of the acid dissolution capacity (i.e., the acid dissolution capacity number approaching zero) alone cannot lead to a sharp dissolution front of the Stefan type in the acidization dissolution system, in which the dissolvable minerals of carbonate rocks are chemically dissolved by the injected acid flow. The acid dissolution capacity number is commonly defined as the ratio of the volume of the carbonate rock dissolved by an acid to that of the acid. In this paper, we use four different proof methods, including (i) direct use of the fundamental concepts; (ii) use of the mathematical governing equations of an acidization dissolution system; (iii) use of the different time scaling approach; and (iv) use of a moving coordinate system approach, to demonstrate that the asymptotic limit of the acid dissolution capacity can indeed lead to sharp dissolution fronts of the Stefan type in acidization dissolution systems on a much larger time scale (than the dissolution time scale). Our new finding is that on the reaction time scale, the condition of the conventional time derivative of porosity approaching zero alone can ensure that the acidization dissolution front has a sharp shape of the Stefan type. Copyright © 2017 John Wiley & Sons, Ltd.