Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

江苏潮滩沉积物激光粒度仪与移液管-筛析分析结果的对比

激光粒度仪的广泛应用带来了与历史数据的对比问题,因此需要建立激光粒度仪与早期分析结果之间的关系。根据江苏海岸潮滩沉积物样品的激光粒度仪和移液管-筛析法分析,对粒度参数、粒度组分等进行了对比,对两种方法的差异进行了分析。结果表明,对于江苏潮滩沉积物粒度参数中平均粒径的激光粒度仪与移液管-筛析分析结果之间有良好的线性关系;筛分法测得的粗颗粒物质较激光法偏少,而移液管法法测得的细颗粒物质较激光法偏多;将样品分类之后再进行两种方法所获粒度参数的回归分析,相关性得以提高,说明不同粒度组成的沉积物对分析结果的对比有不同的影响。两种方法之间的换算关系不仅与研究区域有关,而且与沉积物本身的粒度组成有关。     

超低频电磁探测信号能量的计算及其地质应用

被动式超低频电磁探测技术是一种有效的探测地下地质体和资源的手段,但采用现有的处理方法得到的探测曲线较容易受到各种噪声的干扰,影响了对所获得的探测曲线的解释。笔者将信号能量引入到超低频电磁探测信号的处理中。首先根据信号能量计算原理,计算不同深度的超低频探测信号的能量值．获取能量曲线。同时,根据具体应用目的,分析其曲线特征,并将信号能量曲线与现有的信号曲线,如最大值曲线、最小值曲线等进行对比分析。结果表明,与现有方法相比,笔者所提出的信号能量曲线方法能更准确地反映地下岩层特征,有利于曲线的地质解译。     

PVC-U塑料管在浅层地热能地下水资源开发工程中应用与研究

PVC-U塑料管具有耐腐蚀、不结垢、质量轻、使用寿命长等特点。将其应用于浅层地热能开发和供水管井工程中,不但可以解决金属井管腐蚀破裂、结垢和水源热泵回灌难等问题,而且还减少了水井维修费用、延长其使用寿命。结合河南郑州实施的437、400 m两眼浅层地热能开发和供水管井示范工程实践,详细论述了PVC-U塑料管成井工艺、存在问题及解决方法的研究成果。     

1.0GPa和常温至1100 ℃条件下角闪石斜长片麻岩的V_p变化:实验测量与理论计算

在1．0GPa、常温至1100℃条件下测量了角闪石斜长片麻岩的纵波速度（Vp）,并统计了不同温度实验产物中各种矿物的体积百分含量。结果显示,1．0GPa下,角闪石斜长片麻岩的Vp首先随温度升高（室温至700℃）缓慢降低约6％,然后（700—850℃）快速降低约6％,再（850～950℃）转而急剧升高15％～25％,最后（T〉950℃）又快速下降。实验产物分析表明在高温高压下α-石英-β石英相变和岩石部分熔融是岩石Vp异常变化的主要因素。由取样产物的矿物含量和弹性参数,计算了各温度条件下岩石的Vp得出与实验测量相同的波速-温度变化趋势,即Vp随温度升高先缓慢降低,接着快速降低后又急剧升高,最后又快速减小。实验测量和理论计算对比研究表明,通过高温高压下岩石中的物相变化观测结果进行岩石波速的计算,是检验岩石弹性波速测量结果和研究地球内部地震波结构的一种有效方法。     

三维抛物方程Douglas交替方向隐格式的稳定性和收敛性

作者研究三维变系数抛物方程 Douglas交替方向隐格式的稳定性和收敛性。采用 H1能量估计方法 ,证明格式按离散 H1范数是绝对稳定的 ,并且收敛阶为 O(Δ t2 + h2 )     

Numerical study of the motions and drift force of a floating OWC device

The motion and the drift force of a floating OWC (oscillating water column) wave energy device in regular waves are studied taking account of the oscillating surface-pressure due to the pressure drop across the duct of the air chamber. The potential problem inside the chamber is formulated by making use of the Green integral equation associated with the Rankine-type Green function while the outer problem with the Kelvin-type Green function. The added mass, wave damping and excitation coefficients as well as the motion and drift force of the OWC device are calculated for various values of parameter related to the pressure drop.     

Control strategies for the Clam Wave Energy Device

A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction.     

Wave Decay and Its Characteristics in Surf Zone

In accordance with the similarity between breaking waves and hydraulic jumps, the expressions for estimating wave decay and wave energy dissipation in the surf zone are derived based on the fundamental equations of fluid mechanics. Using the numerical solution of cnoidal wave theory, the various kinematic properties of waves in the surf zone, including the relative wave crest height, wave energy, and radiation stress are discussed. The values calculated with the method proposed in this paper are in good agreement with the experimental data gained by other researchers. The present expressions can be used in the studies of sediment transport on gently sloping beaches, especially on muddy beaches.     

钢筋混凝土梁结构断裂损伤诊断方法

提出一种基于BP神经网络的结构破损诊断方法,该方法以结构破损前后柔度的变化作为破损诊断网络输入,为了解决由于系统响应样本数据空间分布不均匀对网络收敛速度及网络诊断影响问题,对网络训练样本采用广义空间格点进行了交换,模拟算例及应用实例均表明,本文方法能准确诊断结构破损位置与破坏程度,是一种有效的结构破损诊断方法.