Formation of the mid-fifteenth century Kuwae caldera (Vanuatu) by an initial hydroclastic and subsequent ignimbritic eruption

In the mid-fifteenth century, one of the largest eruptions of the last 10 000 years occurred in the Central New Hebrides arc, forming the Kuwae caldera (12x6 km). This eruption followed a late maar phase in the pre-caldera edifice, responsible for a series of alternating hydromagmatic deposits and airfall lapilli layers. Tuffs related to caldera formation ( 120 m of deposits on a composite section from the caldera wall) were emitted during two main ignimbritic phases associated with two additional hydromagmatic episodes. The lower hydromagmatic tuffs from the precaldera maar phase are mainly basaltic andesite in composition, but clasts show compositions ranging from 48 to 60% SiO₂. The unwelded and welded ashflow deposits from the ignimbritic phases and the associated intermediate and upper hydromagmatic deposits also show a wide compositional range (60–73% SiO₂), but are dominantly dacitic. This broad compositional range is thought to be due to crystal fractionation. The striking evolution from one eruptive style (hydromagmatic) to the other (magmatic with emission of a large volume of ignimbrites) which occurred either over the tuff series as a whole, or at the beginning of each ignimbritic phase, is the most impressive characteristic of the caldera-forming event. This strongly suggests triggering of the main eruptive phases by magma-water interaction. A three-step model of caldera formation is presented: (1) moderate hydromagmatic (sequences HD 1–4) and magmatic (fallout deposits) activity from a central vent, probably over a period of months or years, affected an area slightly wider than the present caldera. At the end of this stage, intense seismic activity and extrusion of differentiated magma outside the caldera area occurred; (2) unhomogenized dacite was released during a hydromagmatic episode (HD 5). This was immediately followed by two major pyroclastic flows (PFD 1 and 2). The vents spread and intense magma-water interaction at the beginning of this stage decreased rapidly as magma discharge increased. Subsequent collapse of the caldera probably commenced in the southeastern sector of the caldera; (3) dacitic welded tuffs were emplaced during a second main phase (WFD 1–5). At the beginning of this phase, magma-water interaction continued, producing typical hydromagmatic deposits (HD 6). Caldera collapse extended to the northern part of the caldera. Previous C¹⁴ dates and records of explosive volcanism in ice from the south Pole show that the climactic phase of this event occurred in 1452 A.D.     

成都城市发展对热岛强度影响的主成份回归分析

本文对成都市总人口、建成区面积等11个因子、作了主成份回归L-S估计和M-估计,讨论了成都城市发展对“热岛”强度的主要影响因子。结果表明,城区房屋建筑面积及总人口数是影响城市气候(气温)的主要因子,其次为城市人口总户数、建成面积等。 文中,对回归方程进行了拟合计算,回归效果比较满意(尤其是稳健回归)。     

云南大地热流及地热地质问题

本文报道了云南20多个大地热流测试数据。据热流分布特点并参考前人有关资料,结合地球物理测深资料、岩石热物性与放射性生热率测试数据,对各区地壳深度范围的温度、热流配分组成作了粗略分析,划分出各有特征的若干地质-热流区。云南普遍地热偏高(滇东南小范围除外)的主要原因是新构造运动强烈;怒江以西近代岩浆活动亦强烈,具有典型的板块交汇带的基本地热特点     

Statistical evaluation of methods for the calculation of static formation temperatures in geothermal and oil wells using an extension of the error propagation theory

The feasibility of using the more sophisticated weighted least-squares (WLS) model, as opposed to the traditional ordinary least-squares (OLS), in linear regressions of BHT data to estimate the static formation temperatures (SFT) was investigated. The most commonly used analytical methods (line-source; spherical and radial heat flow; and cylindrical heat source) were applied. Error propagation equations were derived to calculate errors in the time function of each method. These errors were combined with the BHT measurement errors to compute weighting factors for applying the WLS. Intercept uncertainties were estimated for all regressions using sets of synthetic and actual borehole logs taken from geothermal and oil applications. SFT computed with the spherical and radial heat flow method were generally greater than those from the other two methods.     

马鞍山市江心洲湿地保护与利用

围绕马鞍山江心洲湿地的发展规划,分析了湿地现状及因港口、城市发展所面临的保护与发展问题。以当今湿地与水资源保护为前提,探讨了江心州湿地开发利用战略与保护措施,提出了湿地保护与发展兼容的若干经验模式。     

The distribution of radiogenic heat production as a function of depth in the Sierra Nevada Batholith, California

Geochemical analyses and geobarometric determinations have been combined to create a depth vs. radiogenic heat production database for the Sierra Nevada batholith, California. This database shows that mean heat production values first increase, then decrease, with increasing depth. Heat production is 2 μW/m³ within the 3-km-thick volcanic pile at the top of the batholith, below which it increases to an average value of 3.5 μW/m³ at 5.5 km depth, then decreases to 0.5–1 μW/m³ at 15 km depth and remains at these values through the entire crust below 15 km. Below the crust, from depths of 40–125 km, the batholith's root and mantle wedge that coevolved beneath the batholith appears to have an average radiogenic heat production rate of 0.14 μW/m³. This is higher than the rates from most published xenolith studies, but reasonable given the presence of crustal components in the arc root assemblages. The pattern of radiogenic heat production interpreted from the depth vs. heat production database is not consistent with the downward-decreasing exponential distribution predicted from modeling of surface heat flow data. The interpreted distribution predicts a reasonable range of geothermal gradients and shows that essentially all of the present day surface heat flow from the Sierra Nevada could be generated within the 35 km thick crust. This requires a very low heat flux from the mantle, which is consistent with a model of cessation of Sierran magmatism during Laramide flat-slab subduction, followed by conductive cooling of the upper mantle for 70 m.y. The heat production variation with depth is principally due to large variations in uranium and thorium concentration; potassium is less variable in concentration within the Sierran crust, and produces relatively little of the heat in high heat production rocks. Because silica content is relatively constant through the upper 30 km of the Sierran batholith, while U, Th, and K concentrations are highly variable, radiogenic heat production does not vary directly with silica content.     

Evidence for deep groundwater flow and convective heat transport in mountainous terrain, Delta County, Colorado, USA

The Tongue Creek watershed lies on the south flank of Grand Mesa in western Colorado, USA and is a site with 1.5 km of topographic relief, heat flow of 100 mW/m², thermal conductivity of 3.3 W m^–1 °C^–1, hydraulic conductivity of 10^-8 m/s, a water table that closely follows surface topography, and groundwater temperatures 3–15°C above mean surface temperatures. These data suggest that convective heat transport by groundwater flow has modified the thermal regime of the site. Steady state three-dimensional numerical simulations of heat flow, groundwater flow, and convective transport were used to model these thermal and hydrological data. The simulations provided estimates for the scale of hydraulic conductivity and bedrock base flow discharge within the watershed. The numerical models show that (1) complex three-dimensional flow systems develop with a range of scales from tens of meters to tens of kilometers; (2) mapped springs are frequently found at locations where contours of hydraulic head indicate strong vertical flow at the water table, and; (3) the distribution of groundwater temperatures in water wells as a function of surface elevation is predicted by the model.     

Effect of heat treatment on tourmaline from Brazil

The crystal-chemical behaviour of tourmaline from Araçuaí, Minas Gerais state, Brazil, when subjected to heating in air atmosphere has been studied by several techniques, including EMPA, UV–Vis, TGA, and Mössbauer spectroscopy. The tourmaline samples are typically intermediate members of the elbaite-schorl series. The origin of colour and of its change after treatment has been discussed in terms of local disorder, presence of metal transition elements, oxidation of ferrous iron at the octahedral site, and simultaneous trap of the excess electron. These findings may be used to enhance the colour in tourmaline crystals or generate wanted colour changes.     

中国大陆科学钻探（CCSD）主孔地区岩石圈热结构

岩石圈热结构是指地球内部热量在壳幔的配分比例、温度以及热导率和生热率等热学参数在岩石圈中的分布特征。岩石圈的热结构直接影响着岩石的物理性质和流变学性质,同时还控制了化学反应的类型和速度,从而制约着岩石圈的发展和演化。本文在前人CCSD主孔岩石主、微量元素研究基础上,利用Rybach生热率公式计算了钻孔岩石的放射性生热率,并结合岩石热导率的测定研究了CCSD主孔100-2000m岩石的热结构和主孔榴辉岩在不同退变质程度下生热率、热导率的变化:钻孔中岩石的平均生热率为0.95μWm-3,平均热导率为2.96mWm-1K-1。,其中片麻岩生热率高迭1.01-1.7μWm-3,热导率为2.76-2.96mWm-1K-1;基性超基性岩石生热率最低(<0.21μWm-3),热导率则高达3.20mWm-1K-1以上;新鲜榴辉岩生热率、热导率居中,分剐为0.16-0.44μWm-3和3.31-3.85mWm-1K-1。钻孔中榴辉岩生热率、热导率变化主要受岩性控制:从新鲜榴辉岩到完全退变榴辉岩,热导率总体上降低,但从强退变榴辉岩到完全退变榴辉岩,岩石热导率升高;而在此过程中岩石生热率总体上升高,仅当从中等退变质榴辉岩退变为强退变质榴辉岩时,岩石生热率出现降低趋势。在综合研究的基础上预测CCSD主孔5000m深度处温度为139℃,温度范围为131-151℃。根据区域深部地球物理探测成果对CCSD主孔地区岩石圈热结构进行了研究:上地壳底部温度为256℃,中地壳底部温度为492℃,Moho面温度为683℃,岩石圈底部温度为1185℃,来自地幔的热流为44.1mWm-2,对地表热流的贡献率为58%。研究结果表明,由岩石物理方法获得的CCSD主孔地区岩石圈地温曲线与石榴石-二辉橄榄岩包体推断的中国东部地温曲线十分吻合,本文从实验岩石物理学角度为CCSD主孔地区岩石圈热结构研究提供了重要约束