http://www.sciencedirect.com/science/article/pii/S1674987112000424

Subcooled liquid solubility is the water solubility for a hypothetical state of liquid.It is an important parameter for multicomponent nonaqueous phase liquids(NAPLs) containing polycyclic aromatic hydrocarbons(PAHs),which can exist as liquids even though most of the solutes are solid in their pure form at ambient temperature.So far,subcooled liquid solubilities were estimated from the solid water solubility and fugacity ratio of the solid and(subcooled) liquid phase,but rarely derived from experimental data.In our study,partitioning batch experiments were performed to determine the subcooled liquid solubility of PAHs in NAPL-water system.For selected PAH,a series of batch experiments were carried out at increased mole fractions of the target component in the NAPL and at a constant NAPL/ water volume ratio.The equilibrium aqueous PAH concentrations were measured with HPLC and/or GCMS. The subcooled liquid solubility was derived by extrapolation of the experimental equilibrium aqueous concentration to a mole fraction of unity.With the derived subcooled liquid solubility,the fugacity ratio and enthalpy of fusion of the solute were also estimated.Our results show a good agreement between the experimentally determined and published data.     

Low-temperature heat capacities,entropies and enthalpies of Mg<Subscript>2</Subscript>SiO<Subscript>4</Subscript> polymorphs,and α−β−γ and post-spinel phase relations at high pressure

The low-temperature isobaric heat capacities (C _p) of β- and γ-Mg₂SiO₄ were measured at the range of 1.8–304.7 K with a thermal relaxation method using the Physical Property Measurement System. The obtained standard entropies (S°₂₉₈) of β- and γ-Mg₂SiO₄ are 86.4 ± 0.4 and 82.7 ± 0.5 J/mol K, respectively. Enthalpies of transitions among α-, β- and γ-Mg₂SiO₄ were measured by high-temperature drop-solution calorimetry with gas-bubbling technique. The enthalpies of the α−β and β−γ transitions at 298 K (ΔH°₂₉₈) in Mg₂SiO₄ are 27.2 ± 3.6 and 12.9 ± 3.3 kJ/mol, respectively. Calculated α−β and β−γ transition boundaries were generally consistent with those determined by high-pressure experiments within the errors. Combining the measured ΔH°₂₉₈ and ΔS°₂₉₈ with selected data of in situ X-ray diffraction experiments at high pressure, the ΔH°₂₉₈ and ΔS°₂₉₈ of the α−β and β−γ transitions were optimized. Calculation using the optimized data tightly constrained the α−β and β−γ transition boundaries in the P, T space. The slope of α−β transition boundary is 3.1 MPa/K at 13.4 GPa and 1,400 K, and that of β−γ boundary 5.2 MPa/K at 18.7 GPa and 1,600 K. The post-spinel transition boundary of γ-Mg₂SiO₄ to MgSiO₃ perovskite plus MgO was also calculated, using the optimized data on γ-Mg₂SiO₄ and available enthalpy and entropy data on MgSiO₃ perovskite and MgO. The calculated post-spinel boundary with a Clapeyron slope of −2.6 ± 0.2 MPa/K is located at pressure consistent with the 660 km discontinuity, considering the error of the thermodynamic data.     

High-pressure transitions and thermochemistry of MGeO3 (M=Mg, Zn and Sr) and Sr-silicates: systematics in enthalpies of formation of A2+B4+O3 perovskites

Phase transitions in MgGeO₃ and ZnGeO₃ were examined up to 26 GPa and 2,073 K to determine ilmenite–perovskite transition boundaries. In both systems, the perovskite phases were converted to lithium niobate structure on release of pressure. The ilmenite–perovskite boundaries have negative slopes and are expressed as P(GPa)=38.4–0.0082T(K) and P(GPa)=27.4−0.0032T(K), respectively, for MgGeO₃ and ZnGeO₃. Enthalpies of SrGeO₃ polymorphs were measured by high-temperature calorimetry. The enthalpies of SrGeO₃ pseudowollasonite–walstromite and walstromite–perovskite transitions at 298 K were determined to be 6.0±8.6 and 48.9±5.8 kJ/mol, respectively. The calculated transition boundaries of SrGeO₃, using the measured enthalpy data, were consistent with the boundaries determined by previous high-pressure experiments. Enthalpy of formation (ΔH _f°) of SrGeO₃ perovskite from the constituent oxides at 298 K was determined to be −73.6±5.6 kJ/mol by calorimetric measurements. Thermodynamic analysis of the ilmenite–perovskite transition boundaries in MgGeO₃ and ZnGeO₃ and the boundary of formation of SrSiO₃ perovskite provided transition enthalpies that were used to estimate enthalpies of formation of the perovskites. The ΔH _f° of MgGeO₃, ZnGeO₃ and SrSiO₃ perovskites from constituent oxides were 10.2±4.5, 33.8±7.2 and −3.0±2.2 kJ/mol, respectively. The present data on enthalpies of formation of the above high-pressure perovskites were combined with published data for A²⁺B⁴⁺O₃ perovskites stable at both atmospheric and high pressures to explore the relationship between ΔH _f° and ionic radii of eightfold coordinated A²⁺ (R _A) and sixfold coordinated B⁴⁺ (R _B) cations. The results show that enthalpy of formation of A²⁺B⁴⁺O₃ perovskite increases with decreasing R _A and R _B. The relationship between the enthalpy of formation and tolerance factor ( R _o: O²⁻ radius) is not straightforward; however, a linear relationship was found between the enthalpy of formation and the sum of squares of deviations of A²⁺ and B⁴⁺ radii from ideal sizes in the perovskite structure. A diagram showing enthalpy of formation of perovskite as a function of A²⁺ and B⁴⁺ radii indicates a systematic change with equienthalpy curves. These relationships of ΔH _f° with R _A and R _B can be used to estimate enthalpies of formation of perovskites, which have not yet been synthesized.     

Calorimetric determination of the enthalpy of Mg-Fe ordering in orthopyroxene

The enthalpy of Mg-Fe ordering in En₅₀Fs₅₀ orthopyroxene was measured using the transposed temperature drop calorimetric method. Heat effects associated with two consecutive drops were recorded. In the first drop, synthetic orthopyroxene samples equilibrated at 823?K, 0.1?MPa and a f?O₂ of the WI buffer were dropped from 823?K into the calorimeter, which was held at 1173?K. The measured heat effect corresponds to the enthalpy change due to the heat capacity of the sample from 823 to 1173?K and to the enthalpy associated with the (dis)ordering of Mg and Fe²⁺. In the second drop, the samples, with an Fe-Mg order corresponding to 1173?K, were dropped again from 823 to 1173?K. From the difference of the heat effects measured in the two experiments, the enthalpy of disordering associated with the temperature change from 823 to 1173?K was calculated to be ?1.73±0.04 J mol^?1. The observed enthalpy corresponds to a change in the mole fraction of iron on the M2 site, ΔX _Fe,M2=?0.096 ± 0.001, which leads to of ΔH ⁰ _exch of 18.0 ± 0.4 kJ mol^?1 for the exchange reaction: The degree of Fe-Mg order was characterized by ⁵⁷Fe Mössbauer resonance spectroscopy. In order to minimize the error due to the thickness of the absorber, the iron concentration of the absorber was reduced step by step from 5 to 1 mg?Fe?cm^?2. The iron distribution extrapolated to zero thickness was used for the calculations of the enthalpy of exchange reaction.     

Thermodynamic mixing behavior of synthetic Ca-Tschermak–diopside pyroxene solid solutions: I. Volume and heat capacity of mixing

The unite cell parameters and heat capacities of a series of synthetic clinopyroxenes on the join Ca-Tschermak (CaTs)−diopside (Di) were measured using X-ray powder diffraction and calorimetric methods, respectively. The volume of mixing at 298 K shows a negative asymmetric deviation from ideality. A two-parameter Margules fit to the data yields W _CaTs−Di ^V = −0.29 ± 0.11 cm³ mol⁻¹ and W _Di−CaTs ^V = −1.14 ± 0.14 cm³ mol⁻¹. Heat capacities were determined between 5 and 923 K by heat-pulse at 5−302 K and differential-scanning calorimetry at 143−923 K. The precision of the low and high temperature C _p data is better than ±1%. Polynomials of the form C _p = a + bT ^−1/2 + cT ⁻² + dT ⁻³ were fitted to the C _p data in the temperature range between 250 and 925 K. Thermal entropy values [S ₂₉₈ − S ₀] and [S ₉₀₀ −S ₀] as well as enthalpies [H ₂₉₈ − H ₀] and [H ₉₀₀ − H ₀] were calculated for all members of the solid solution series. No significant deviation from ideal mixing behavior was observed.