Low‐P and high‐T metamorphism of basalts: Insights from the Sudbury impact melt sheet aureole and thermodynamic modelling

Low‐pressure and high‐temperature (LP–HT) metamorphism of basaltic rocks, which occurs globally and throughout geological time, is rarely constrained by forward phase equilibrium modelling, yet such calculations provide valuable supplementary thermometric information and constraints on anatexis that are not possible to obtain from conventional thermometry. Metabasalts along the southern margin of the Sudbury Igneous Complex (SIC) record evidence of high‐grade contact metamorphism involving partial melting and melt segregation. Peak metamorphic temperatures reached at least ~925°C at ~1–3 kbar near the SIC contact. Preservation of the peak mineral assemblage indicates that most of the generated melt escaped from these rocks leaving a residuum characterized by a plagioclase–orthopyroxene–clinopyroxene–ilmenite‐magnetite±melt assemblage. Peak temperatures reached ~875°C up to 500 m from the SIC lower contact, which marks the transition to metabasalts that only experienced incipient partial melting without melt loss. Metabasalts ~500 to 750 m from the SIC contact are characterized by a similar two‐pyroxene mineral assemblage, but typically contain abundant hornblende that overgrew clino‐ and orthopyroxene along an isobaric cooling path. Metabasalts ~750 to 1,000 m from the SIC contact are characterized by a hornblende–plagioclase–quartz–ilmenite assemblage indicating temperatures up to ~680°C. Mass balance and phase equilibria calculations indicate that anatexis resulted in 10–20% melt generation in the inner ~500 m of the aureole, with even higher degrees of melting towards the contact. Comparison of multiple models, experiments, and natural samples indicates that modelling in the Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂ (NCFMASHTO) system results in the most reliable predictions for the temperature of the solidus. Incorporation of K₂O in the most recent amphibole solution model now successfully predicts dehydration melting by the coexistence of high‐Ca amphibole and silicate melt at relatively low pressures (~1.5 kbar). However, inclusion of K₂O as a system component results in prediction of the solidus at too low a temperature. Although there are discrepancies between modelling predictions and experimental results, this study demonstrates that the pseudosection approach to mafic rocks is an invaluable tool to constrain metamorphic processes at LP–HT conditions.     

The effect of terrain factors on rice production: A case study in Hunan Province

Journal of Geographical Sciences - Rice (Oryza sativa L.) is the most important staple crop of China, and its production is related to both natural condition and human activities. It is fundamental...     

福建省复杂地形下旬平均气温分布式模拟

为建立高时空分辨率的福建省复杂地形下气温栅格数据集，利用福建省及其周边33个常规气象站观测资料，基于数字高程模型（DEM）数据，综合考虑海拔、太阳总辐射、地表长波有效辐射对旬平均气温的影响，模拟了福建省复杂地形下旬均温的空间分布。结果表明：1）常规站验证结果显示：各旬气温绝对误差平均值（MAE）最小为0.46℃，最大为2.3℃，全年平均为0.87℃；加密站验证结果显示，MAE最大为2.3℃，最小0.5℃，全年平均为0.96℃。2）模拟结果能反映旬均温的宏观分布规律与局地细节特征。宏观范围内，旬均温受纬度影响较大，由北至南气温逐渐升高，沿海地区旬均温整体高于内陆，山区旬均温明显较低；局地范围内，各坡向上气温差异显著，海拔越高、坡度越大，差异越明显；地形因子对旬平均温的影响具有季节差异，具体表现为冬季时地形因子对旬均温的影响最大，秋季次之，春夏季节中地形因子对旬均温的影响最弱。     

顾及多分析尺度的地形部位面向对象分类方法

地形部位是地表形态的基本单元,其分类和提取在地貌发育、数字土壤制图、景观生态制图等领域有着重要的应用。康鑫等提出的多尺度Geomorphons地形部位分类法（简称多尺度Geomorphons法）利用高程相对差异信息和地形部位多尺度特征,可避免受地形属性计算及单一分析尺度约束而误分类,然而其存在分类破碎及分析尺度域难以确定的问题。基于此,本文以多尺度Geomorphons法为基础,提出了其适宜分析尺度域确定方法,建立了以初始地形部位数据层组合的对象多尺度分割和分类方法,进而构建了顾及多分析尺度的地形部位面向对象分类方法。以陕北黄土高原区域5 m分辨率DEM为实验数据,对面向对象分类方法进行了验证与评价。实验结果表明：①均值变点法可有效解决分析尺度域难以确定的问题,实验样区适宜分析尺度域为[5×5, 33×33]栅格单元;②以0,255为二值化的地形部位数据层组合适用于多尺度分割,尺度、形状及紧致度参数组合影响分割结果,且对于实验样区存在最优分割参数;③与多尺度Geomorphons法相比,本文方法得到的地形部位分类结果完整性较好,在地表形态对应和地理认知等方面更具合理性。     

New P–T constraints on the Tamayen glaucophane‐bearing rocks,eastern Taiwan: Perple_X modelling results and geodynamic implications

New pseudosection modelling was applied to better constrain the P–T conditions and evolution of glaucophane‐bearing rocks in the Tamayen block of the Yuli belt, recognized as the world's youngest known blueschist complex. Based on the predominant clinoamphibole, textural relationships, and mineral compositions, these glaucophane‐bearing high‐P rocks can be divided into four types. We focused on the three containing garnet. The chief phase assemblages are (in decreasing mode): amphibole + quartz + epidote + garnet + chlorite + rutile/titanite (Type‐I), phengite + amphibole + quartz + garnet + chlorite + epidote + titanite + biotite + magnetite (Type‐II), and amphibole + quartz + albite + epidote + garnet + rutile + hematite + titanite (Type‐III). Amphibole exhibits compositional zoning from core to rim as follows: glaucophane → pargasitic amphibole → actinolite (Type‐I), barroisite → Mg‐katophorite/taramite → Fe‐glaucophane (Type‐II), glaucophane → winchite (Type‐III). Using petrographic data, mineral compositions and Perple_X modelling (pseudosections and superimposed isopleths), peak P–T conditions were determined as 13 ± 1 kbar and 550 ± 40 °C for Type‐I, 10.5 ± 0.5 kbar and 560 ± 30 °C for Type‐II (thermal peak) and 11 ± 1 kbar and 530 ± 30 °C for Type‐III. The calculations yield higher pressures and temperatures than previously thought; the difference is ~1–6 kbar and 50–200 °C. The three rock types record similar P–T retrograde paths with clockwise trajectories; all rocks followed trajectories with substantial pressure decrease under near‐isothermal conditions (Type‐I and Type‐III), with the probable exception of Type‐II where decompression followed colder geotherms. The P–T paths suggest a tectonic environment in which the rocks were exhumed from maximum depths of ~45 km within a subduction channel along a relative cold geothermal gradient of ~11–14 °C km^?1.     

Re-conceptualizing the Anthropocene: A call for collaboration

Since it was first proposed in 2000, the concept of the Anthropocene has evolved in breadth and diversely. The concept encapsulates the new and unprecedented planetary-scale changes resulting from societal transformations and has brought to the fore the social drivers of global change. The concept has revealed tensions between generalized interpretations of humanity’s contribution to global change, and interpretations that are historically, politically and culturally situated. It motivates deep ethical questions about the politics and economics of global change, including diverse interpretations of past causes and future possibilities. As such, more than other concepts, the Anthropocene concept has brought front-and-center epistemological divides between and within the natural and social sciences, and the humanities. It has also brought new opportunities for collaboration. Here we explore the potential and challenges of the concept to encourage integrative understandings of global change and sustainability. Based on bibliometric analysis and literature review, we discuss the now wide acceptance of the term, its interpretive flexibility, the emerging narratives as well as the debates the concept has inspired. We argue that without truly collaborative and integrative research, many of the critical exchanges around the concept are likely to perpetuate fragmented research agendas and to reinforce disciplinary boundaries. This means appreciating the strengths and limitations of different knowledge domains, approaches and perspectives, with the concept of the Anthropocene serving as a bridge, which we encourage researchers and others to cross. This calls for institutional arrangements that facilitate collaborative research, training, and action, yet also depends on more robust and sustained funding for such activities. To illustrate, we briefly discuss three overarching global change problems where novel types of collaborative research could make a difference: (1) Emergent properties of socioecological systems; (2) Urbanization and resource nexus; and (3) Systemic risks and tipping points. Creative tensions around the Anthropocene concept can help the research community to move toward new conceptual syntheses and integrative action-oriented approaches that are needed to producing useful knowledge commensurable with the challenges of global change and sustainability.     

一次江淮气旋复杂降水相态特征及成因分析

本文应用常规探空资料、地面观测资料、欧洲中心细网格(0.25°×0.25°)数值预报初始场资料和NCEP/NCAR 1°×1°再分析资料分析了山东一次江淮气旋降雪过程的复杂相态特征,并初步分析了成因。结论如下:(1)山东省2014年2月16—17日的雨雪天气过程,降水相态多样性和相态转化复杂性是主要特点,表现为同一时刻雨、雪和雨夹雪三种相态共存,郯城站降水相态逆转(由雨夹雪转雨再转雪),鲁东南地区降雪同时鲁西南地区降雨的"东雪西雨"现象。(2)在系统发展不强的江淮气旋降雪过程中,鲁中山区相对高海拔地区夜间强烈的辐射降温和山脉迎风坡的动力抬升作用均会造成边界层温度的降低,后期对流层低层为东北风控制时,除鲁中山区外,其迎风坡东麓或东北麓(潍坊地区)出现固态降水可能性也较大,一般情况下,地面2 m温度为1~2℃,1 000 hPa温度为0℃左右,925 hPa温度为-3℃左右,可出现固液共存降水现象。(3)相态逆转现象的发生与江淮气旋发展阶段和气温日变化两个因素紧密相关。0℃层在925 hPa上下的状态是一种临界状态,可产生雨夹雪或雨,但0℃层高度下降不是由雨转雪的充分条件,还需考察冷平流发展情况。(4)当江淮气旋生成地偏东(位于长江口附近),且发展不强烈时,山东若受其影响产生降水,后期上游如有新系统发展,可能与气旋共同影响山东,造成复杂相态的江淮气旋降雪过程。     

广义残差地形模型及其在局部重力场逼近中的应用

研究了残差地形模型中的非调和性问题,比较了基于棱柱体和球冠体的积分模型,提出了基于球冠体积分的广义残差地形模型。以泊松小波径向基函数为构造基函数,结合广义残差地形模型,融合多源实测重力数据构建了局部区域重力场模型。研究结果表明:基于棱柱体积分的残差地形模型精度较低,在山区可能引入毫伽级以上的误差,建议采用更为接近真实地形表面的球冠体积分模型。相比于原始的残差地形模型,基于球冠体积分的广义残差地形模型能更为精确地逼近局部重力场模型中地形因素引起的高频效应。     

基于规则格网的DEM插值实验

通过地形建模,将6个地形隶属函数按照101×101,112×112,126×126,144×144,168×168,201×201,257×257 7种格网密度生成6种局部地形单元的规则格网DEM;使用反距离加权(IDW)等7种插值算法,将前6种格网密度下的DEM插值成257×257规格;从原始257×257DEM中随机抽取检查点计算残差,并对残差中误差进行分析。通过分组插值实验,运用控制变量法、方差分析等方法研究地貌类型、采样密度和插值算法对DEM插值精度的影响。