Limestone weathering in Eastern Australia. Part 2: Surface micromorphology study

Results from long term microerosion meter (MEM) studies indicate that microenvironments are characterized by different erosion rates. A complementary study, carried out on the same sites, examines the microscale morphology in each environment. Optical and scanning electron microscopy were used to identify a range of features thought to reflect different processes. Under subaerial conditions micromorphology is dominated by biological weathering features owing to the presence of microflora. Sites permanently covered by soil or stream water have only dissolution etch features, though stream sites may exhibit microfractures. Sites with periodic exposure exhibit both dissolution and biological etch features. The natural environment is more accurately reflected by allowing some microflora colonization of MEM sites rather than preventing colonization by artificial means.     

鲜水河断裂带大震复发机制和时空分布原因

岩石接触面在高温高围压下经过几天便烧结起来而有很高但低于原岩的剪切强度。烧结面与主压应力方向夹角大于55—65°时,便不再断裂而沿其它方向剪断。实验最低温压相当地壳10km深,这应是地壳大断裂的上部裂面与下部烧结层的界限深度,受力后便向下延裂,在下部形成震源。这可能是鲜水河断裂带震源在10—25km深重复发生的原因。由带内大震机制解P轴方向与地球自转速率变化趋势的关系、区域残余应力场水平主压应力分布方向与断裂带走向的关系,讨论了带内大震活动时段的原因。由带内裂面烧结条件、残余和现今应力高值区、岩体低强度区及储存弹性应变能高值区的分布,研究了带内大震空间分布原因。     

Physical,radiative, and dynamical processes within a nighttime marine stratus cloud

Observations taken by aircraft and conventional platforms are used to investigate dynamical, physical, and radiative processes within a marine stratus cloud during the Canadian Atlantic Storms Program (CASP) II field project which took place over the east coast of Canada. Stratus which formed over the ocean on February 6, 1992 during the nighttime, is studied to analyze cloud top and base processes. The cloud was supercooled during the study period. Fluctuations and fluxes are calculated along constant flight altitude legs approximately 100 km long in space. The scales of structures larger than 5 km are removed from the analysis using a running average technique. Droplet spectra obtained by a forward scattering spectrometer probe (FSSP) were used in a 1-D radiative transfer model to calculate infrared (IR) fluxes and radiative heating rates. A heat conservation equation was used to estimate vertical air velocity (w _a ) within the cloud. The results showed that, because of a warmer ocean surface, significant moisture and heat were transferred from the ocean surface to the boundary layer. The cloud base was at about 400 m height and the top was at about 1.4 km.w _a at the cloud base was estimated about 5 cm s^–1. Strong IR cooling rate at the cloud top was calculated to be 75°C day^–1 for a 100 m thick layer. Negative skewness inw _a , suggesting narrow downdrafts, was likely due to radiative cooling at the cloud top. The entrainment velocity was found to be about 1.5 cm s^–1 at cloud top. Mean moisture and heat fluxes within the cloud were estimated to be comparable to those from the ocean surface. Vertical air velocity at the cloud top due to radiative cooling was found to be about –40 cm s^–1.     

计算最小走时和射线路径的界面网全局方法

用慢度分块均匀正方形模型将介质参数化，仅在正方形单元的边界上设置计算结点，这些结点构成界面网．根据Ｈｕｖｓｅｎｓ和Ｆｅｒｍａｔ原理，由不断扩张、收缩的波前点扫描代替波前面搜索，在波前点附近点的局部最小走时计算中对波前点之间的走时使用双曲线近似，通过比较确定最小走时和相应的次级源位置，记录在以界面网点位置为指针的３个一维数组中．借助这些数组通过向源搜索可计算任意点（包括界面网以外的点）上的全局最小走时和射线路径．这一方法不受介质慢度差异大小限制，占内存少，计算速度较快，适于走时反演和以Ｍａｓｌｏｖ射线理论为基础的波场计算．     

贵州兴仁滥木厂汞铊矿床矿物扫描电镜研究

贵州兴仁滥木厂汞、铊矿床，矿体主要产出于上二叠龙潭组和长兴组泥岩、灰岩、泥质灰岩、硅质岩、煤岩和碳质页岩等混杂岩系。利用扫描电子显微镜及能谱分析等研究手段，对该矿床的物质组成、矿物成分特征及微观特征进行了探讨，为成矿元素汞、铊的赋存状态，生物成矿特征研究等提供矿物学资料。     

COOLING RATES, SKY VIEW FACTORS AND THE DEVELOPMENT OF INTRA-URBAN AIR TEMPERATURE DIFFERENCES

Intra‐urban cooling rates were monitored for a year in the centre of Göteborg on the Swedish west coast. Five sites with different building geometry ‐ from dense canyon to open space ‐ within a radius of 300 m were analysed. Results showed two modes of cooling during the night. In the first mode, the cooling was site‐dependent ‐the open space cooled the most and the dense canyon the least. In the second mode, which began about 3–4 hours after sunset, all sites cooled at the same rate. Our hypothesis is that in the early part of the evening both radiative divergence and sensible heat dominate the cooling. However, as the evening progresses, a spatially homogeneous inversion is established which controls the radiative cooling, making the cooling independent of both surface geometry and surface type. From April to November the sites cooled rapidly around sunset and the cooling slowly decreased during the rest of the night. However, between December and March, the cooling was less intense, with an almost constant rate during the entire night. It has been suggested that this might be the result of the draining of stored solar heat during the summer and a continuous flux of anthropogenic heating during the winter.     

Application of Load/Unload Response Ratio in the Study of Seismicity in the Region of Iran

The variation of Load/Unload Response Ratio (LURR) against time for earthquakes in Kerman Province, Iran, on February 22, 2005, M6.4 and in Lorestan Province, Iran, on March 31, 2006, M6.1, has been calculated and analysed in this paper. The tempo-spatial scanning of LURR in the region of Iran during January 1, 2003 to March 31, 2006 has been conducted, with 1 year as a time-window, 1 month as a time-step, and the comparison of the LURR anomalous regions in 2004 with the actual earthquakes with M≥5.0 in the next year (2005) is also given, which shows that 11 earthquakes with M≥5.0 occurred in LURR anomalous regions while 12 earthquakes with M≥5.0 in LURR regions in 2005. Furthermore, the seismicity in this region is studied by investigating the evolvement of the anomalous LURR regions.     

地面起伏对成像及雷达景象匹配的影响

景象匹配是飞行器导航与定位的一种重要手段,其中的雷达图像匹配由于具有全天候的特征而受到人们的重视.在分析了实时雷达图像成像方式的基础上,具体分析了地面高程起伏对雷达图像构像的影响,并进一步推导出在实时雷达图像上,图像像点位移与地面高程起伏的具体关系;以及为了保证一定的匹配定位精度,对于实飞地区地面起伏的定量要求.同时还对导航定位匹配所用的参考基准图受地面高程起伏的影响情况进行了定量的分析,并对理论情况和实际图像进行了计算分析与比较,最后得出在给定匹配精度的情况下,生成参考图时对成像区域内点之间的高差限制要求.     

激光测距—成像组合扫描仪多源数据采集技术的研究

阐述一套机载运行的光学－机械扫描式激光测距和被动式热红外外扫描成像组合遥感器，结合飞机平台的姿态测量和GPS定位，可实时（准实时）获取地面景物的三维位置和影像灰度信息。由多源数据采集技术获得的多种同步数据经地面计算机回放和处理，可以快速生成数字地面高程模型（DEM）和地学编码图像。扫描激光测距仪与扫描成像仪的电同步技术控制激光测距采样时刻与图像采样时刻在时序上的一致性，从而达到高程数据与图像像元的匹配。     

煤中显微裂隙的成因类型及其研究意义

分析、归纳了大量的扫描电子显微镜观测结果，以煤岩学、构造地质学研究为基础，依据煤中显微裂隙的形态，大小、排列组合等发育特征，将内生裂隙进一步划分为失水裂隙，缩聚裂隙、静压裂隙，将外生裂隙进一步划分为张性裂隙，压性裂隙，剪性裂隙，松弛裂隙，描述了各类隙的发育特征，探讨了裂隙的演化，识别和影响裂隙发育的因素，裂隙成因类型的研究，有助于判断不同裂隙对煤储层渗透率的贡献。