二维地电条件下充电法地形改正的一种方法

本文首先讨论了充电法地形改正方法及存在的问题，提出了一种基于比值法思想的地改方法，经理论模型验算表明，有较好的地改效果     

山区三维地震勘探大时差静校正及时深转换

山地煤矿采区地形条件复杂，正确进行大时差静校正是处理好二维地震勘探资料的重要一环。大时差静校正会改变煤层反射波时间(t0)及双曲线特征，为减小校正误差，需设立一个CMP面，将校正量分为高频分量和CMP校正量。在地形高差变化剧烈的山地，不能用高于地表面的统一基准面为零线进行时深转换，须进行充填层时差(△t)校正，将统一基准面校正到地表面，再以地表面为零线进行时深转换成图。以便准确无误的展示煤层赋存形态，提高构造图精度。     

GPS水汽遥感中的大气干延迟局地订正模型研究

在GPS遥感水汽过程中,大气干延迟模型的精度直接影响水汽遥感的精度。根据广东清远站1995～2001年的气象探空资料,计算了GPS水汽测量中的实际大气干延迟。在此资料基础上,利用地面气象要素建立了大气干延迟的年和分月局地订正模型。分析结果表明,年模型的精度优于目前广泛使用的普适模型;月模型与年模型相比,效果不是很明显,建立局地分月订正模型意义不大;在对高度角的敏感程度上,局地模型略大些;当高度角小于75时,大气干延迟弯曲路径与直线路径之差ΔS随天顶角增大而迅速增大。     

应用6S模式对EOS-MODIS可见光到中红外波段的大气订正

应用6S辐射传输模式对MODIS可见光到中红外波段的反射率进行大气订正，订正过程分两步进行:首先设定地表为朗伯体，再应用二向反射模型BRDF进行订正，订正结果与美国MODIS研究组应用MAS实验结果进行比较表明，两者变化趋势是一致的；经过臭氧、水汽、气溶胶等散射吸收订正，对于一定范围的反射率，大气订正使植被区红光波段反射率ρ₁降低、近红外波段反射率ρ₂增加，蓝光波段反射率ρ₃降低；大气订正后，归一化植被指数I_NDV较大气订正前有所增加，增加的最大值为0.104，抗土壤-大气植被指数IEV值略有减小，减小的最大值为0.005。     

Accuracy analysis, dem generation and validation using russian tk-350 stereo-images

TK-350 stereo-scenes of the Zonguldak testfield in the north-west of Turkey have been analysed. The imagery had a base-to-height ratio of 0·52 and covered an area of 200 km × 300 km, with each pixel representing 10 m on the ground. Control points digitised from 1:25 000 scale topographic maps were used in the test. A bundle orientation was executed using the University of Hanover program BLUH and PCI Geomatica OrthoEngine AE software packages. Tests revealed that TK-350 stereo-images can yield 3D geopositioning to an accuracy of about 10 m in planimetry and 17 m in height. A 40 m resolution digital elevation model (DEM) was generated by the PCI system and compared against a reference DEM, which was derived from digitised contour lines provided by 1:25 000 scale topographic maps. This comparison showed that accuracy depends mainly on the surface structure and the slope of the local terrain. Root mean square errors in height were found to be about 27 and 39 m outside and inside forested areas, respectively. The matched DEM demonstrated a systematic shift against the reference DEM visible as an asymmetric shift in the frequency distribution. This is perhaps caused by the presence of vegetation and buildings.     

松辽盆地南部深层地震资料处理方法研究

针对松辽盆地南部深层原始地震记录接收能量弱、信噪比低、各种干扰波严重和地表条件多变等存在严重的静校正问题，尝试利用CGG、Foucs、Grisys、Promax等多套处理系统的优势模块对跨工区二维大吾4面进行深部地层的折射波静校正、反褶积、剩余静校正、DipMoveOut、偏移等关键技术的联合处理方法试验研究，形成了一套针对松辽盆地南部深层地震资料处理的有效方法。     

Analysis of Sediments and Soils by X-Ray Fluorescence Spectrometry Using Matrix Corrections Based on Fundamental Parameters

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) is widely used for the analysis of soils and sediments using well characterised procedures. However, difficulties can occur with samples such as unknowns containing small amounts of ore materials and samples collected from contaminated sites where trace elemental concentrations can exceed the concentration range for routine analysis. We studied the performance of a commercially available method, based on fundamental parameters (FP) to correct matrix effects. The spectrometer was originally calibrated with elemental or simple compound calibrants. Samples were analysed as pressed powder pellets. Eighteen sediment and soil reference materials, three of them with certified values for some of their constituents, were used to evaluate accuracy, by comparing results with recommended values and their standard deviations (RV ± 2s) or certified values and their confidence intervals (CV ± Cl). When results fell systematically outside these intervals, calibrations were refined with geochemical reference materials. The best agreement of results with recommended and certified values was obtained when the contents of H₂O and C in each sample were included as matrix constituents during calculations. The detection limits of trace elements tended to be relatively high, because the measuring conditions employed were not maximised for sensitivity. The main advantage of the method tested was that it enabled the analysis of samples with high concentrations of trace elements and the determination of elements such as F, Bi, Sb and W, which are not commonly included in quantitative XRF analysis of geological samples.     

基于EM算法和单幅雷达图像阴影的控制点坡度校正

对在我国现有的条件下进行控制点坡度校正的必要性进行了阐述，并分析了EM算法。根据EM算法以及基于区域增长的余弦散射模型建立了控制点坡度校正模型，并用河北省张北地区的雷达影像进行了实验，取得了较高的精度初值。     

MODIS 1B影像几何纠正方法研究及软件实现

MODIS影像是一种新型和重要的数据。对MODIS 1B影像几何畸变原因进行了深入分析，选择了一种合适的纠正方法。对于1km分辨率MODIS 1B影像，直接采用1km分辨率的空间坐标进行几何纠正；对于250m和500m分辨率的MODIS 1B影像，先用三次样条曲线对坐标进行插值生成同分辨率的坐标，然后利用坐标插值结果对其进行几何纠正。由于MODIS影像在空问分布上的特殊性，采用前向和后向映射相结合的方式确定纠正后某一像素点在原始影像中的位置。根据该位置的条带重叠度，可以确定参与计算像素个数、搜索窗口的大小以及窗口的精确位置；采用归一化反距离加权插值法计算纠正后像素点的属性值。上述优化算法不仅保证了纠正后影像的质量，而且提高了数据处理速度。作者在Visual C 6．0环境下开发实现了上述算法。从坐标插值和几何纠正结果分析，无论是数据处理速度还是纠正后的影像质量和精度均达到要求。     

Correcting method of eddy covariance fluxes over non-flat surfaces and its application in ChinaFLUX

Although Eddy Covariance (EC) technique is one of the best methods for estimating the energy and mass exchanges between underlying surface and atmosphere in micrometeorology, errors and uncertainties still exist without necessary corrections. In this paper, we will focus on the effect of coordinate system on the eddy fluxes. Based on the data observed over four sites (one farmland site, one grassland site and two forest sites), the effects of three coordinate system transforming methods (Double Rotation-DR, Triple Rotation-TR and Planar Fit-PF)on the turbulent fluxes are analyzed. It shows that (i) the corrected fluxes are more or less than the uncorrected fluxes, which is related mainly to the sloping degree of surface, wind speed and wind direction; and (ii) pitch angle has a sinusoidal dependence on wind direction, especially in the regular sloping terrain; and (iii) PF method is something like the simplification of TR or DR,and there are not obvious distinctions in correction in sloping grassland and flat farmland, but PF method is not suitable for uneven and irregular forest sites.