准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。     

2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models

One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures.     

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.     

Water waves generated by instantaneous disturbances at the bed of a sloping beach

The two-dimensional problem of the generation of water waves due to instantaneous disturbances prescribed at the bed of a beach sloping at an arbitrary angle is studied here. It is formulated in terms of an initial-boundary-value problem for the velocity potential describing the motion in the fluid region assuming the linear theory. Using the Laplace transform in time and the Mellin transform in distance, the problem is reduced to solving a difference equation whose method of solution is of considerable importance in the literature. The form of the free surface is obtained in terms of a multiple infinite integral that is evaluated by the method of steepest-descent. For some prescribed forms of the disturbance at the bed of the beach, the free surface is depicted in a number of figures for different beach angles. It is observed that as the beach angle decreases, the maximum wave height increases, which is plausible.     

A joint distribution of significant wave height and characteristic surf parameter

The paper provides a joint distribution of significant wave height and characteristic surf parameter. The characteristic surf parameter is given by the ratio between the slope of a beach or a structure and the square root of the characteristic wave steepness in deep water defined in terms of the significant wave height and the spectral peak period. The characteristic surf parameter is used to characterize surf zone processes and is relevant for e.g. wave run-up on beaches and coastal structures. The paper presents statistical properties of the wave parameters as well as an example of results corresponding to typical field conditions.     

The interaction of two asymmetric quasi-geostrophic vortex patches

ABSTRACT

Herein we study the general interaction of two vortex patches in a single-layer quasi-geostrophic shallow-water flow. Steadily-rotating equilibrium states are found over a wide parameter space spanning the Rossby deformation length, vortex area ratio, potential vorticity ratio, and gap between their innermost edges. A linear stability analysis is then used to identify the critical gap separating stable and unstable solutions, over the entire range of area and potential vorticity ratios, and for selected values of the Rossby deformation length. A representative set of marginally unstable equilibrium states are then slightly perturbed and evolved by an accurate contour dynamics numerical algorithm to understand the long-term fate of the instabilities. Not all instabilities lead to vortex merger; many in fact are characterised by weak filamentation and a small adjustment of the vortex shapes, without merger. Stronger instabilities lead to material being torn from one vortex and either wrapped around the other or reduced to ever thinning filamentary debris. A portion of the vortex may survive, or it may be completely strained out by the other.     

Gas generation and expulsion characteristics of Middle–Upper Triassic source rocks,eastern Kuqa Depression,Tarim Basin,China: implications for shale gas resource potential

Frontier exploration in the Kuqa Depression, western China, has identified the continuous tight-sand gas accumulation in the Lower Cretaceous and Lower Jurassic as a major unconventional gas pool. However, assessment of the shale gas resource in the Kuqa Depression is new. The shale succession in the Middle–Upper Triassic comprises the Taliqike Formation (T₃t), the Huangshanjie Formation (T₃h) and the middle–upper Karamay Formation (T_2–3k), with an average accumulated thickness of 260 m. The high-quality shale is dominated by type III kerogen with high maturity and an average original total organic carbon (TOC) of about 2.68 wt%. An improved hydrocarbon generation and expulsion model was applied to this self-contained source–reservoir system to reveal the gas generation and expulsion (intensity, efficiency and volume) characteristics of Middle–Upper Triassic source rocks. The maximum volume of shale gas in the source rocks was obtained by determining the difference between generation and expulsion volumes. The results indicate that source rocks reached the hydrocarbon expulsion threshold of 1.1% VR and the hydrocarbon generation and expulsion reached their peak at 1.0% VR and 1.28% VR, with the maximum rate of 56 mg HC/0.1% TOC and 62.8 mg HC/0.1% TOC, respectively. The volumes of gas generation and expulsion from Middle–Upper Triassic source rocks were 12.02 × 10¹² m³ and 5.98 × 10¹² m³, respectively, with the residual volume of 6.04 × 10¹² m³, giving an average gas expulsion efficiency of 44.38% and retention efficiency of 55.62%. Based on the gas generation and expulsion characteristics, the predicted shale gas potential volume is 6.04 × 10¹² m³, indicating a significant shale gas resource in the Middle–Upper Triassic in the eastern Kuqa Depression.     

Compact and tunable mid-infrared source based on a 2 μm dual-wavelength KTiOPO4 intracavity optical parametric oscillator

Using a double resonant KTiOPO₄ (KTP) intracavity optical parametric oscillator operating at degenerated point of 2 μm, we demonstrate a unique mid-infrared source based on difference frequency generation in GaSe crystal. The output tuning range is 8.42-19.52 μm, and a peak power of 834 W for type-I phase matching scheme and 730 W for type-II phase matching scheme are achieved. Experimental results show that this oscillator is a good alternative to the generator of a compact and tabletop mid-infrared radiation with a widely tunable range.     

Pulse generation models for daily intermittent streamflows / Modèles de génération d’impulsions pour des débits journaliers intermittents

Abstract

Abstract Generating pulses and then converting them into flow are two main steps of daily streamflow generation. Three pulse generation models have been proposed on the basis of Markov chains for the purpose of generating daily intermittent streamflow time series in this study. The first one is based on two two-state Markov chains, whereas the second uses a three-state Markov chain. The third model uses harmonic analysis and fits Fourier series to the three-state Markov chain. Results for a daily intermittent streamflow data series show a good performance of the proposed models.