第二次土地调查建库过程中数据质量的控制方法

第二次全国土地调查工作正在广泛开展,其中数据库如实、高效、精确的建立是最主要的任务,而数据质量控制程度的高低直接影响了数据库的建设状况。本文以山西省大同市新荣区为例简要叙述了本次土地利用现状调查数据质量的误差来源及影响因素,同时针对这些问题提出了各阶段的数据质量控制方法与措施,从而对本次土地调查建库过程中的数据质量控制方法进行了探究。     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

黄山高速滑移弯曲边坡变形机理分析及应急治理对策

黄山高速公路穿行于皖南山区,公路建设过程中,汤口互通A匝道高边坡产生了大范围变形,严重威胁已有构筑物和施工安全。为保证边坡稳定,成立“应急指挥小组”,建立快速反应机制,并采用工程地质测绘、勘探、监测等手段,快速查明边坡结构特征,分析边坡变形机理和稳定性,提出应急治理方案。分析表明,该边坡为层间软弱夹层[JP2]发育的砂泥岩互层型顺向边坡,地质历史上边坡曾发生滑移—弯曲变形,公路施工时对弯曲隆起部位岩体进行开挖,引起坡体产生快速变形,在降雨、开挖等条件下,边坡产生整体失稳的可能性极大。在分析边坡变形机制基础上,应用变形控制理论,确定对边坡采取桩锚结合、综合排水的应急治理措施,并根据变形特点提出了应急治理施工步骤。应急治理措施实施后,边坡变形得到了有效控制,稳定性达到了高速公路的安全要求     

全站仪似水准法和对向法高程测量的比较研究

通过对似水准法和对向法高程测量原理、误差来源及精度的比较分析,我们发现随着距离和竖直角度的增大,对向法高程测量中误差的变化大于似水准法高程测量中误差的变化;当两观测点间的水平距离小于等于1km时,对向法高程测量精度一般高于似水准法高程测量精度,但是当两观测点间的水平距离大于1km时,似水准法高程测量精度一般高于对向法高程测量精度。     

城市控制网改造中的关键问题

本文结合成都市控制网改造的实例,较为详细地阐述了城市控制网改造中的基准转换、长度变形、CORS系统和似大地水准面精化等关键问题及其解决方案,从而为大中城市控制网的建设提供参考。     

测量控制网优化设计的可靠性准则法

测量控制网优化设计与网的精度、可靠性、灵敏度以及费用等准则有关,但这些准则之间的关系又十分密切,本文提出了一种基于观测值内部可靠性指标的测量控制网模拟法优化设计新方法,介绍了其原理和特点,并用实例说明了用该方法的计算步骤和优化效益。     

基于LBV变换的遥感影像多步骤分类法研究

面对与日俱增的遥感数据,如何快速准确地进行影像分类成为遥感领域亟待解决的问题。本文在前人的基础上提出了一种基于LBV变换的遥感影像多步骤分类方法。L:地物的总辐射水平,集中反映了裸地的信息;B:地物的可见-红外光辐射平衡,是地面水分状况和水体存在的一个良好指标;V:地物辐射随波段变化的方向和速度向量,能集中反映地面植被状况。多步骤分类法遵循由易到难的原则,能克服类别之间的互相影响,从而提高分类精度。文章结合LBV变换和多步骤分类法的优点对影像进行了分类,结果表明该方法简单易行,且能达到良好的分类精度。     

相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

模拟退火算法在控制网平差中的应用

线性最小二乘估计在对非线性函数进行线性近似的过程中会产生模型误差,而一些非线性参数估计方法可能因为函数复杂而难以求导,法方程系数矩阵秩亏或呈病态矩阵时难以求解,非线性迭代解法有时对初始值的选择存在依赖性,不恰当的初始值会导致迭代无法收敛。针对这些问题,引入了模拟退火算法,介绍了该算法的基本原理、计算步骤和收敛性,并以3个控制网平差应用为例,说明该算法具有无需求导求逆,简洁实用,易于编程等优势,并能实现全局优化,获得高精度的平差结果。