Coal-measure source rock characteristics and burial evolution history in the Shisanjianfang Area,Tuha Basin

Shisanjianfang Area in the eastern margin of Taibei Sag, Tuha Basin, is an important region for oil and gas exploration. In this study, a large number of source rock geochemical data were used to analyze the geochemical characteristics of coal-measure source rocks in the Shisanjianfang Area, Tuha Basin, from three aspects, i.e., organic matter abundance, organic matter type, and organic maturity. The results show that the Jurassic Xishanyao Formation (J₂x) in the study area has great thickness, continuous distribution, and high source rock maturity, and is the major source rock horizon in the study area. The seismic data are used in combination with 1D and 2D basin simulation technology to study the distribution characteristics of the source rocks in Shisanjianfang Area. The results of the simulation research on the source rock maturity history in the study area indicate the following: (1) The source rocks in the Xishanyao Formation (J₂x) have a hydrocarbon generation threshold depth of 1800 m, threshold temperature of 95 °C, and hydrocarbon generation threshold time of about 162 Ma. (2) The Xishanyao Formation (J₂x) has a current formation temperature of 50~110 °C and Ro of 0.6~1.1 % in the peak oil generation stage. (3) The source rock maturity in the study area is shown as being higher in the west while lower in the east, and higher in the north while lower in the south, and the favorable exploration area mainly lies in the northwest of the study area. The results of this study could have important implications for the oil and gas exploration in the margins of Xiaocaohu Sag, Tuha Basin.     

Sensitivity analysis of runoff hydrographs due to temporal rainfall patterns in Makkah Al-Mukkramah region,Saudi Arabia

Runoff peak and volume in flood studies are estimated relying on temporal rainfall distribution from various storm patterns. Usually, SCS distributions types (I, II, III, IA) are commonly used. Using these distributions in runoff calculations assume that the in situ temporal rainfall pattern typically behaves as the one described by the SCS-type distribution, which is due to cyclonic frontal storms and actually developed in temperate environment. To what extent such assumption is valid in the arid environment? How much the impacts of rainfall temporal patterns are reflected in runoff volumes and peaks? The aim objectives of the current study are to answer the above two questions and clarify the validity of aforementioned assumption and exemplify such effect. Real rainfall data collected from rain gauges of Makkah Al-Mukkramah region over a period of more than 20 years are utilized. Temporal rainfall patterns and their parameters are deduced. Many hydrological simulations are performed and comparisons, in terms of runoff volume and peak flows, are made to show the effects of the common rainfall storm patterns and the developed rainfall storm patterns in the region based on the current study. Results indicate that major bursts of the design rainfall storm pattern are located in the first time of the storm period in the two quartiles which is mainly due to convective rainfall type in thunderstorms unlike the commonly used by SCS types relying on frontal cyclonic storms. Makkah Al-Mukkramah temporal rainfall pattern does not behave as the “typical pattern” assumed by SCS distributions that are deduced from different environments. The impacts of the temporal pattern reflected as an overestimate in the runoff peak reached to 68 %. The developed hyetographs and tables presented in the current study are recommended to enhance economical and rational design practice in watersheds of Makkah Al-Mukkramah region.     

The geochemistry of uranium occurrences and speciation in groundwater of Chinnar sub basin,South India

An attempt has been made in Chinnar sub basin of Dharmapuri district, South India to isolate the geochemistry of uranium occurrences in groundwater. The geology of the area is mainly of charnockite and granite gneiss. Groundwater samples were collected for two different seasons post and pre monsoon in two different litho units (granite gneiss and charnockite) and analysed for major, minor and uranium concentrations. Higher uranium (18.45 μg L^?1) has been recorded during pre monsoon season in granite gneiss with increasing pH. The saturation index calculation for the groundwater isolated minerals like uaraninite, coffinite, haiweeite and soddyite to be precipitating and uranium oxides like UO_2.25, UO_2.25beta, UO_2.33beta as oversaturated. The Eh-pH diagram attempted represents solubility of uraninite within the pH range of 6.0 to 8.0. The study isolate uranium in groundwater of the study area is controlled by the presence of (U₄O₉) uranium oxide.     

Mechanical characteristics of dip basement effects on dump stability in the Shengli open pit mine in Inner Mongolia,China

For waste dump slopes that form basements, landslides can be prevented by determining a stability evolving law of dynamic development. Keeping this issue in mind, the relationship between the mechanical structure and stability of waste dumps with basements is studied. Three key factors that influence waste dump stability are presented, and judgment criteria for self-locking and unlocking states of dump basements are provided. From the friction coefficient of waste dump basement stability analyses of the Shengli open pit mine, the results indicate that waste dump basements on the right side of fault F8 and on the left side of fault F61 are subjected to self-locking. However, between faults F61 and F8, the basement is subjected to unlocking. Regarding the residual thrusting of unlocking areas, structure and stability optimization schemes for waste dumps in the Shengli open pit mine are provided through a mechanics analysis. Reducing the slopes and basement angles of waste dumps can enhance their stability by increasing basement roughness levels.     

Complexity measurement of regional groundwater resources system using improved Lempel-Ziv complexity algorithm

In this paper, the self-adaptive artificial fish swarm algorithm (SAAFSA) is used to optimize the coarse graining of segment numbers, which are used in the Lempel-Ziv complexity algorithm. This approach improves the Lempel-Ziv complexity (LZC) algorithm of equal probability coarse graining. As a case study, the complexities of monthly series of groundwater depth were analyzed at seven farms in the Hongxinglong Administration. GIS technology was used to create spatial distributions of monthly groundwater depths. A projection pursuit model based on the SAAFSA was established and used for complexity attribution analysis at selected farms with different degrees of complexity. The three selected farms, Hongqiling, 852, and Youyi, each represent a certain degree of complexity. Further analysis shows that precipitation, evaporation, temperature, and human activities are the primary factors that cause complexity variations in local groundwater depth. The results reveal the evolution of the complexity characteristics of local groundwater depth and provide scientific evidence for the need to effectively allocate regional water resources. Additionally, the proposed method can be applied in complexity analyses of other hydrologic features, as well as in research regarding nonlinear time series in economic, engineering, medical, and signal analyses.     

PCA and SVM as geo-computational methods for geological mapping in the southern of Tunisia,using ASTER remote sensing data set

The purpose of this study was to examine the efficiency of Advanced Space Borne Thermal Emission and Reflection Radiometer (ASTER) data in the discrimination of geological formations and the generation of geological map in the northern margin of the Tunisian desert. The nine ASTER bands covering the visible (VIS), near-infrared (NIR) and short-wave infrared (SWIR) spectral regions (wavelength range of 400–2500 nm) have been treated and analyzed. As a first step of data processing, crosstalk correction, resampling, orthorectification, atmospheric correction, and radiometric normalization have been applied to the ASTER radiance data. Then, to decrease the redundancy information in highly correlated bands, the principal component analysis (PCA) has been applied on the nine ASTER bands. The results of PCA allow the validation and the rectification of the lithological boundaries already published on the geologic map, and gives a new information for identifying new lithological units corresponding to superficial formations previously undiscovered. The application of a supervised classification on the principal components image using a support vector machine (SVM) algorithm shows good correlation with the reference geologic map. The overall classification accuracy is 73 % and the kappa coefficient equals to 0.71. The processing of ASTER remote sensing data set by PCA and SVM can be employed as an effective tool for geological mapping in arid regions.     

Facies analysis and sequence stratigraphy of Kometan Formation (Upper Cretaceous) in the imbricated zone,northeastern Iraq

Facies and sequence stratigraphic analysis of the Kometan Formation (Upper Cretaceous) were studied from Kometan village, Kurdistan region of northeastern Iraq. Lithologically, the formation consists of 44 m of white weathering, light grey, thin to medium-bedded highly fractured limestones with chert nodules. Petrographic study of the carbonates shows that both skeletal and non-skeletal grains were present. The skeletal grains include a variety of planktonic foraminifera (including Oligostegina), calcispheres, ostracods, pelecypods, larva ammonite, and echinoderms. Non-skeletal grains include peloids only. Three main microfacies types are distinguished in the studied formation. The results of stable carbon and oxygen isotopes of the studied carbonate samples show negative values of δ¹⁸O. These indicate that the seawater was warm with low salinity during precipitation of the carbonates in the Kometan Formation in northeastern Iraq. The positive δ¹³C values of carbonate samples, in the middle part of the formation, reflect the widespread deposition of organic-rich marine sediments during a transgression and deepening of the basin. Petrographic, facies and stable isotopic analyses revealed that the Kometan Formation was deposited in a warm, basinal, pelagic (open marine) environment with low salinity. The Kometan Formation consists of one complete third-order depositional sequence, separated by a sequence boundary (SB) of type 2. The third-order sequence is subdivided into a transgressive systems tract (TST) and highstand systems tract (HST). This reflects episodes of transgression and still stands of the relative sea level. The TSTs are topped by maximum flooding surface (MFS) characterized by deepening-/fining-upward parasequences implying a retrogradational stacking pattern. The HST is marked by shallowing-/coarsening-upward parasequences implying a progradational stacking pattern.     

Automatic identification of fake patterns caused by short-width wavelets in seismic data

Despite the popularity of using the Haar wavelet filter in many applications, it sometimes introduces fake patterns into the multi resolution analysis (MRA) of seismic data. In this work, we compared different wavelet filters to demonstrate that these patterns are fake and not part of the original waveforms and to show that they are a result of using the Haar wavelet filter as a short-width wavelet. To achieve this, many seismic waveforms from two different sources: the Egyptian National Seismic Network (ENSN) and the High Sensitivity Seismograph Network Japan (Hi-net) are used with different wavelet filters. We propose an algorithm based on an autoregressive (AR) model to detect these patterns automatically and fully.     

Using cloud water path and cloud top temperature for estimating convective and stratiform rainfall from SEVIRI daytime data

A satellite rainfall retrieval technique is proposed here. The relationships of rain rate with each of cloud water path (CWP) and cloud top temperature (CTT) are investigated. The CWP and CTT are retrieved from SEVIRI data (spinning enhanced visible and infrared imager), and corresponding rain rates are measured by weather radar. The rain rates are compared to corresponding CWP and then to corresponding CTT. The investigation demonstrates an exponential functional dependency between rain rates and CWP for low and moderate rain rates (stratiform rainfall). Conversely, the rain rates are more closely related to CTT for high rain rates (convective rainfall). Therefore, two separate relationships are established for rain rate retrievals. The results show rain rates estimated by the developed scheme are in good correlation with those observed by weather radar.     

Anomalous optical variations in the grossular garnet from the Eden Mills,Belvidere Mountain (Vermont,USA)

The optical anomalies, and surface and lamellar textures of a birefringent grossular garnet crystal from the Eden Mills, Belvidere Mountain, Vermont, USA, have been investigated by optical polarizing microscope, electron-probe micro-analyzer, back-scattered electron imaging, infrared spectroscopy, and single-crystal X-ray diffractometer from the standpoint of crystal growth. This grossular shows one-to-one correlation between natural surface features and its internal textures under crossed polarizers. Electron-probe micro-analyzer (EPMA) gave average chemical composition in (110) thin section, of bright lamella {Ca_2.97Mn_0.06}_∑3.03 [Al_1.59Fe_0.37Ti_0.01]_∑1.97(Si_3.00)_∑3.00 (Gros_79.5And_18.9Sps_1.6) and of dark host {Ca_2.99Mn _0.06}_∑3.05 [Al_1.73Fe_0.26 Ti_0.01]_∑2.00(Si_2.97OH_0.03)_∑3.00 (Gros_85.4And₁₃Sps_1.6). The correspondence of surface features and the internal textures with spiral or pyramidal growth mechanism suggest that the internal textures of the Eden Mills grossular are formed during growth process. The optical vibrational orientations and the growth steps inclination along [001] and \( \left[\overset{-}{1}10\right] \) directions predict monoclinic symmetry. With X-ray diffractometer (XRD) method, pseudocubic parameters are a = 11.839(2) Å, b = 11.855(1) Å, and c = 11.868(2) Å with interaxial angles α = 90.00(1)°, β = 89.99(1)°, and γ = 90.02(2)° that show orthorhombic symmetry of this crystal. Lamellar texture of Al³⁺-rich host with Fe³⁺-rich lamella infers cation ordering at octahedral site of the garnet structure. IR data favors the non-cubic orientation of [(OH) ₄] at tetrahedral position in this grossular structure.