Centrifugal test of a road embankment built after new dredger fill on thick marine clay

Abstract

The construction of a 100-km road network is planned on a land reclamation area in the Oujiang Estuary in China. The embankment had a height of 4 m and a base width of 60 m. The reclamation area is newly filled by a 3-m dredger fill on a 48-m thick layer of marine clay. Estimation of the settlement of the future road network is difficult. To guide the construction of the road network, a 1/100-scale centrifuge model test was performed with a marine clay sample from the construction site to simulate the layered settlements and evaluate the drainage effect of prefabricated vertical drains in the dredger fill in the following 10 years. The results of the centrifuge modeling test are verified by 10-month in situ monitoring, which shows agreement between the centrifuge modeling test results and the in situ results. The test results indicate that additional time is needed to reinforce the newly added dredger fill by the surcharge preloading method to uplift the elevation of the reclamation area with dredger fill.     

不饱和古罗糖醛酸三糖和甘露糖醛酸三糖的结构表征

以双功能褐藻胶裂解酶 (Pseudoalteromonas sp.strain No. 2 72 )分别降解均聚古罗糖醛酸(PG)和均聚甘露糖醛酸 (PM) ,经 Bio- Gel- P6和 POROS- HQ2 0分离得到 2种三糖纯品 ,经 ESI- MS,1 H- NMR,1 3 C- NMR,1 H- 1 H COSY,1 H- 1 3 C HMQC确定其结构为 Δ4,5-古罗糖醛酸 - α(1→ 4 ) - L-古罗糖醛酸 -α(1→ 4 ) - L -古罗糖醛酸 (简写为Δ GG)和Δ4,5-甘露糖醛酸 -β (1→ 4 ) - D-甘露糖醛酸 -β (1→ 4 ) - D-甘露糖醛酸 (ΔMM) ,为进一步从事构效关系研究提供结构信息。     

舟山群岛一次"晴天暴"过程分析

主要使用常规填图资料计算各种物理量,对一次“晴天暴”大风过程进行诊断分析,结果表明此次大风的形成机制是:在强盛的西北急流作用下,急行性干冷锋快速东移南下,形成中低层的强温度梯度和地面气压梯度,高空冷平流与地面加热共同作用,形成大的温度层结递减率,产生不稳定层结,引起垂直动量交换,因此地面出现强风。最后总结出此类大风的预报思路。     

鱼类生长激素的体内代谢、分泌调控和作用机制研究的进展

主要对１９８３－１９９６年间关于鱼类生长激素的体内代谢、分泌调控和作用机制的研究进展予以综合评述。通过鱼类划性放射免疫测定法的建立和体风代谢动力学研究，证实，外源生长激素在鱼体内不会产生积累。鱼类生长激素的分泌调控受下丘脑分泌的生长激素释放因子（ＧＨＲＦ）和释放抑制因子（ＳＲＩＦ）的双重；促性腺激素释放激素（ＧｎＲＨ）、雌二醇（Ｅ２）、促甲状腺素释放激素（ＴＲＨ）和神经肽（ＮＹＰ）对鱼类生长激素的     

廉州湾及其邻近水域初级生产力研究

１９９２～１９９３年，在对廉州湾及其邻近海域的环境调查中，首次对该海区叶绿素ａ与初级生产力进行了测定。获得叶绿素ａ的春季平均值为１．００ｍｇ·ｍ－３，秋季为０．２９ｍｇ·ｍ－３，初级生产力的平均值为３０１．５ｍｇ·ｍ－２·ｄ－１。文章对调查区初级生产力的分布特征及变化规律进行了探讨，并与北方沿海的初级生产力水平进行了比较。     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

完善综合监测预警系统提高海洋环境监控能力

自1996年江苏省实施“海上苏东”战略以来,南通市海洋经济以年均16%以上的增长率迅速发展,至2004年,全市海洋经济总产值达到226亿元,海洋经济已成为南通市国民经济发展的一条亮丽的风景线。然而,当前全市海洋经济占比达43.6%的海洋渔业经济遭受了极大挑战。2004年,南通市海洋渔业两大主导产品——条斑紫菜与文蛤同期发生重大病灾,造成经济损失1亿余元。群发性上访等事件给整个社会带来了诸多不稳定因素,海洋渔业经济的管理也陷入了被动应付的困境。引发紫菜与文蛤重大病灾的因子较多,海洋生态环境恶化是其中一个极为重要的因素。面对海洋渔…     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

Variation in Water Masses on Shelf of Northern Bering Sea in September 2016-2018

Abstract

Based on hydrological data obtained during the 7th to 9th Chinese National Arctic Research Expeditions in the summers of 2016–2018, the main water structure on the shelf of the northern Bering Sea and the volume and heat fluxes of the Bering Strait throughflow were analyzed. Distinct variability was identified in the three Pacific water masses feeding the strait - Anadyr Water (AW), Bering Shelf Water (BSW) and Alaskan coastal water (ACW). Overall, the temperature and salinity of the entire section increased each year, with 2018 showing significant anomalies, i.e., a temperature anomaly of up to 1?°C and a maximum salinity anomaly of 2. From 2016 to 2018, the extent of the ACW gradually narrowed in the eastern part of this section, while the AW expanded eastward each year. The net volume transport through each of the three sections increased poleward from 1.65?Sv to 2.76?Sv, with the AW increasing from 0?Sv to 1.03?Sv, the BSW varying between 0.52–1.65?Sv, and the ACW gradually decreasing from 1.04?Sv to disappearing completely. The net heat fluxes were also poleward, varying between 25.77 TW and 61.50 TW, and showing a significant increase. Significant variations in magnitude and extent were observed in each water mass of the Bering Strait throughflow, which could produce widespread effects in the Arctic Ocean and the global ocean beyond.