Unravelling the evolution of an Alpine to post-glacially active fault in the Swiss Alps

The Gemmi fault is a prominent NW–SE striking lineament that crosses the Gemmi Pass in the central Swiss Alps. A multidisciplinary investigation of this structure that included geological mapping, joint profiling, cathodoluminescence and scanning electron microscopy, stable isotope measurements, luminescence- and U-TH-dating, 3D ground penetrating radar (GPR) surveying and trenching reveals a history of fault movements from the Miocene to the Holocene. The main fault zone comprises a 0.5–3 m thick calcite cataclasite formed during several cycles of veining and brittle deformation. Displaced Cretaceous rock layers show an apparent dextral slip of 10 m along the fault.A detailed study of a small sediment-filled depression that crosses the fault provides evidence for a post-glacial reactivation of the fault. A trench excavated across the fault exposed a Late-Glacial-age loess layer and late Holocene colluvial-like slope-wash deposits that showed evidence for fault displacement of a few centimeters, indicating a recent strike-slip reactivation of the fault. Focal mechanisms of recent instrumentally recorded earthquakes are consistent with our findings that show that the fault at the Gemmi Pass, together with other parallel faults in this area, may be reactivated in today's stress field. Taking together all the observations of its ancient and recent activity, the Gemmi fault can be viewed as a window through geological space and time.     

Laboratory Study of Air Sparging of TCE-Contaminated Saturated Soils and Ground Water

Air sparging has proven to be an effective remediation technique for treating saturated soils and ground water contaminated by volatile organic compounds (VOCs). Since little is known about the system variables and mass transfer mechanisms important to air sparging, several researchers have recently performed laboratory investigations to study such issues. This paper presents the results of column experiments performed to investigate the behavior of dense nonaqueous phase liquids (DNAPFs). specifically trichloroethylene (TCE), during air sparging. The specific objectives of the study were (1) to compare the removal of dissolved TCE with the removal of dissolved light nonaqueous phase liquids (LNAPLs). such as benzene or toluene; (2) to determine the effect of injected air-flow rate on dissolved TCE removal; (3) to determine the effect of initial dissolved TCE concentration on removal efficiency; and (4) to determine the differences in removal between dissolved and pure-phase TCE. The test results showed that (1) the removal of dissolved TCE was similar to that of dissolved LNAPL: (2) increased air-injection rates led to increased TCE removal at lower ranges of air injection, but further increases at higher ranges of air injection did not increase the rate of removal, indicating a threshold removal rate had been reached; (3) increased initial concentration of dissolved TCE resulted in similar rates of removal: and (4) the removal of pure-phase TCE was difficult using a low air-injection rate, but higher air-injection rates led to easier removal.     

Petrophysics and mineral exploration: a workflow for data analysis and a new interpretation framework

As mineral exploration seeks deeper targets, there will be a greater reliance on geophysical data and a better understanding of the geological meaning of the responses will be required, and this must be achieved with less geological control from drilling. Also, exploring based on the mineral system concept requires particular understanding of geophysical responses associated with altered rocks. Where petrophysical datasets of adequate sample size and measurement quality are available, physical properties show complex variations, reflecting the combined effects of various geological processes. Large datasets, analysed as populations, are required to understand the variations. We recommend the display of petrophysical data as frequency histograms because the nature of the data distribution is easily seen with this form of display. A petrophysical dataset commonly contains a combination of overlapping sub-populations, influenced by different geological factors. To understand the geological controls on physical properties in hard rock environments, it is necessary to analyse the petrophysical data not only in terms of the properties of different rock types. It is also necessary to consider the effects of processes such as alteration, weathering, metamorphism and strain, and variables such as porosity and stratigraphy. To address this complexity requires that much more supporting geological information be acquired than in current practice. The widespread availability of field portable instruments means quantitative geochemical and mineralogical data can now be readily acquired, making it unnecessary to rely primarily on categorical rock classification schemes. The petrophysical data can be combined with geochemical, petrological and mineralogical data to derive explanations for observed physical property variations based not only on rigorous rock classification methods, but also in combination with quantitative estimates of alteration and weathering. To understand how geological processes will affect different physical properties, it is useful to define three end-member forms of behaviour. Bulk behaviour depends on the physical properties of the dominant mineral components. Density and, to a lesser extent, seismic velocity show such behaviour. Grain and texture behaviour occur when minor components of the rock are the dominate controls on its physical properties. Grain size and shape control grain properties, and for texture properties the relative positions of these grains are also important. Magnetic and electrical properties behave in this fashion. Thinking in terms of how geological processes change the key characteristics of the major and minor mineralogical components allows the resulting changes in physical properties to be understood and anticipated.     

Recent shifts in coastline change and shoreline stabilization linked to storm climate change

Since cuspate coastlines are especially sensitive to changes in wave climate, they serve as potential indicators of initial responses to changing wave conditions. Previous work demonstrates that Cape Hatteras and Cape Lookout, North Carolina, which are largely unaffected by shoreline stabilization efforts, have become increasingly asymmetric over the past 30 years, consistent with model predictions for coastline response to increases in Atlantic Ocean summer wave heights and resulting changes in the distribution of wave‐approach angles. Historic and recent shoreline change observations for Cape Fear, North Carolina, and model simulations of coastline response to an increasingly asymmetric wave climate in the presence of beach nourishment, produce comparable differences in shoreline change rates in response to changes in wave climate. Results suggest that the effect of beach nourishment is to compensate for – and therefore to mask – natural responses to wave climate change that might otherwise be discernible in patterns of shoreline change alone. Therefore, this case study suggests that the effects of wave climate change on human‐modified coastlines may be detectable in the spatial and temporal patterns of shoreline stabilization activities. Similar analyses of cuspate features in areas where the change in wave climate is less pronounced (i.e. Fishing Point, Maryland/Virginia) and where local geology appears to exert control on coastline shape (i.e. Cape Canaveral, Florida), suggest that changes in shoreline configuration that may be arising from shifting wave climate are currently limited to sandy wave‐dominated coastlines where the change in wave climate has been most pronounced. However, if hurricane‐generated wave heights continue to increase, large‐scale shifts in patterns of erosion and accretion will likely extend beyond sensitive cuspate features as the larger‐scale coastline shape comes into equilibrium with changing wave conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Mn-oxides and sequestration of heavy metals in a suburban catchment basin of the Chesapeake Bay watershed

The Chesapeake Bay is greatly impacted by numerous pollutants including heavy metals and understanding the controls on the distribution of heavy metals in the watershed is critical to mitigation and remediation efforts in controlling this type of pollution. Clasts from a stormwater catchment basin draining a subdivision near George Mason University, Fairfax VA (38°50.090°N 78°19.204°W) were investigated using X-ray diffraction (XRD), Scanning electron microcopy (SEM) and energy dispersive spectroscopy (EDS) to determine the nature of Mn-oxide coatings and relationship to bound heavy metals. Mn-oxides are poorly crystalline and occur as subhedral to anhedral platy particles and more rarely as euhedral plates. Micronodules are a commonly observed texture. Chemical compositions of coatings are variable with average major constituent concentrations being Mn (33.38 wt%), Fe (11.88 wt%), Si (7.33 wt%), Al (5.03 wt%), and Ba (0.90 wt%). Heavy metals are found in the coatings with Zn being most prevalent, occurring in approximately 58% of analyses with an average concentration of (0.66 wt%). Minor amounts of Co, Ni, Pb, and Cl are observed. Heavy metals and Cl are interpreted as being derived from road pollution. Mn-oxides can serve as a sequestration mechanism for pollution but may also release heavy metals. Field and laboratory observations indicate Mn-oxides occurring on the surface of the clasts can be mechanically mobilized. This is a mechanism for transporting heavy metals into the Chesapeake Bay watershed. Deicing agents may serve as a mechanism to release heavy metals through cation exchange and increased ionic strength. This is the first detailed mineralogical investigation of Mn-oxides and the roles they may play in pollution in the Chesapeake Bay.     

U–Pb dating of calcite–aragonite layers in speleothems from hominin sites in South Africa by MC-ICP-MS

Speleothems are found in association with hominin fossil-bearing cave deposits in South Africa and can be used to provide valuable chronological constraints. Such material is generally too old for U–Th dating and, although U–Pb geochronology presents a suitable alternative, bulk U concentrations are typically too low (<0.05 μg/g) to provide useful ages. For this reason, we used a simple non-invasive beta-scanner imaging screening step to identify U-rich (≥1 μg/g) domains that could be analyzed with MC-ICP-MS techniques to provide U–Pb ages. We demonstrate the technique using samples from Sterkfontein cave that exhibit infrequent <1 cm-thick layers with U concentrations ≥1 μg/g. Relict aragonite needles are found exclusively in these U-rich layers. We analyzed material from the same flowstone suite as Walker et al. (2006) and obtained a U–Pb age of ～2.3 Ma that agrees well with their estimate of 2.24 ± 0.09 Ma. We also obtained similar U–Pb (0.164 ± 0.026 to 0.200 ± 0.052 Ma) and U–Th (0.148 ± 0.003 Ma) ages for another sample exhibiting U-rich layers. We recognize that open-system behaviour during the partial transformation of aragonite to calcite is a potential problem and argue, on the basis of geochemistry and age consistencies, that recrystallization took place rapidly after speleothem formation and did not significantly affect the U–Pb ages.     

The Landscape of Diversity in U.S. Higher Education Geography

Palynological analyses were completed for the A and B horizons of a forested Mollic Hapludalf to determine type, amount, and distribution of pollen and spores within the soil solum. Hypotheses regarding the origin of pollen and the mechanisms of its movement within soil bodies are also advanced. Pollen downwash within the mineral soil seems to be very slow and confined to the uppermost porous and most homogenized part of the solum. The predominance of non-arboreal pollen at depth was believed to be a result of deposition with the loess parent material. High arboreal pollen frequencies in the upper horizons coupled with increases in non-arboreal types at depth indicate gradual ongoing mixing from the present vegetation into the soil.     

Assessment of drought over the past two millennia using near-shore sediment cores from a Canadian boreal lake

Lack of long-term studies on drought in the boreal region of northwest Ontario limits our ability to assess the vulnerability of this region to climate change. We investigated changes in diatoms, scaled chrysophytes, and sedimentary pigments in two near-shore cores from Gall Lake to infer limnological and water-level changes over the last two millennia. The two coring locations, at modern water depths of 7.5 and 11.5 m, were selected to contrast inferences for past lake level based on distance from the modern water-depth boundary between predominantly benthic and planktonic diatom assemblages in surface sediments (6.0 m). Diatom-inferred depth inferences were more variable in the core from 7.5-m water depth, consistent with the hypothesis that the greatest changes occurred at water depths closest to the benthic:planktonic boundary. Both sites revealed a pronounced drought from ~AD 950 to 1300, synchronous with the medieval climate anomaly (MCA). This finding suggests a northeast expansion of the arid MCA into northwest Ontario, extending the known spatial extent of this megadrought. Scaled chrysophytes and sedimentary pigments suggest a recent increase in thermal stratification. Our findings indicate this region is more susceptible to changes in moisture than was previously suspected based on the instrumental record for the past century.