Geology and geochemistry of Tertiary basalt in south Wadi Hodein area, South Eastern Desert, Egypt

Tertiary basalt is widespread in the area south of Wadi Hodein, south Eastern Desert, Egypt. It is the youngest unit in the basement rocks of the Central Eastern Desert classification of El Shazly (Proc 22nd Intl Geol Congr, New Delhi 10:88–101, 1964) and El Ramly (Ann Geol Surv Egypt II:1–17, 1972), traversed all the previous succession of the basement rocks as well as the Nubia Sandstone of Cretaceous age, forming sheets, small hills, ridges, and dikes. This Tertiary basalt is strongly associated with the opening of the Red Sea. Geologic, petrographic, and petrochemical studies as well as microprobe and X-ray analyses were performed on samples from Wadi Hodein Tertiary basalt. Field and petrographic studies classified the Tertiary basalt in south Wadi Hodein into porphyritic olivine basalt, plagiophyric basalt, and doleritic basalt. Opaque minerals (magnetite and ilmenite) constitute 6–7.5% of this basalt. Petrochemical studies and microprobe analyses reveal that they are low-TiO₂ basalt with low uranium and thorium contents, classified as being basaltic andesite to andesite, originated from calc-alkaline magma, and developed in within-plate tectonic environment. Scanning electron microscopy shows that magnetite and ilmenite are the prevalent opaque minerals in this Tertiary basalt. Field radiometric measurements of the Tertiary basalt in south Wadi Hodein reveals low uranium and thorium contents. Uranium contents range from 0.5 to 0.9 ppm, while thorium contents range from 1.2 to 3.2 ppm. Fractional crystallization and mass balance modeling indicate that the most-silica low-TiO₂ Tertiary basalt in south Wadi Hodein can be derived from the relatively less-silica low-TiO₂ Tertiary basalt of south Quseir and Gabal Qatrani through fractional crystallization of plagioclase, olivine, augite, and titanomagnetite oxides. Tertiary basalts in south Wadi Hodein and south Quseir have nearly the same age, 25 Ma (Sherif, The Fifth International Conference on the Geology of Africa, 2007), 24 Ma (Meneisy and Abdel Aal, Ain Shams Sci Bull 25(24B): 163–176, 1984), and 27 Ma (El Shazly et al., Egypt J Geol 1975), respectively. Finally, the fractionation modeling and geochemical characteristics of these basalts suggested their origination from one basaltic magma emplaced in late Oligocene.     

Paleofluid analysis from fracture-fill cements in the Asmari limestones of the Kuh-I-Mond field, SW Zagros, Iran

Kuh-I-Mond field in the Zagros foreland basin is a conventional heavy oil resource and is composed of fractured carbonates whose fractures were filled by calcite, dolomite, and anhydrite cements. Oil inclusions occurred within the fracture-fill cements indicate that fractures were open and played an active role during oil migration and charge. The highest measured values for secondary porosities belong to fractures in Asmari Formation, which is characterized by significant amounts of vug- and fracture-filling cements. Fractures facilitated fluid circulation and subsequently dissolution of allochems and high Mg carbonates. In contrast, fine-grained carbonate facies were less cemented, and thus, porosity enhancement by cement dissolution was insignificant. Temperature profiles of oil inclusions in the dolomite, calcite, and anhydrite minerals characterized by distinct variations in the homogenization temperatures (Th) that are divided into two ranges below 50°C in anhydrites and from 45°C to 125°C in dolomites and calcites. The lower Th ranges for anhydrite suggests that it may have formed at shallower burial depths during early to middle diagenesis. The oil inclusions display trend for increasing temperature downward which conform to Formation geothermal gradient. In other word, the decreasing trend of Th temperatures upward within Asmari Formation that can be observed in Th versus depth plot is consistent with the uplift events at Late Miocene time and later that caused removal of about 1,300 m of the crest of the Kuh-I-Mond anticline. Vitrinite reflectance data from source rock intervals in the field area do not support vertical migration of locally generated hydrocarbons into the Kuh-I-Mond accumulation, and long-distance lateral oil migration and charge from a source kitchen to the southwest is proposed. Vitrinite reflectance data from this dolomite and limestone reservoir suggest low maturation levels corresponding to paleotemperatures less than 50°C. The observed maturation level (<0.5% Ro) does not exceed values for simple burial maturation based on the estimated burial history. Also, homogenization temperatures from fluid inclusion populations in calcite and dolomites show expected good correlation with reflectance-derived temperatures. The Th data represent pore fluids became warmer and more saline during burial. As aqueous fluid inclusions in calcite veins were homogenized between 22°C and 90°C with a decrease in salinity from 22 to 18 eq.?wt.% NaCl. The Th values suggest a change in water composition and that dolomite and calcite cements might have precipitated from petroleum-derived fluids. The hydrocarbon fluid inclusions microthermometry data suggest that the reservoir was being filled by heavy black oils in reservoir during Cenozoic. Aqueous fluid inclusions hosted by calcite equant sparry/fossil cavity fills suggest low cementation temperatures (<45°C) and high salinities (19 eq.?wt.% NaCl), while those in dolostones are characterized by highly variable homogenization temperature (52°C to 125°C) and salinities (6.5 to 20 eq.?wt.% NaCl).     

Regional ionosphere modeling in support of IRI and wavelet using GPS observations

Dual-frequency global navigation satellite systems (GNSS) observations provide most of the input data for development of global ionosphere map (GIM) of vertical total electron content (VTEC). The international GNSS service (IGS) develops different ionosphere products. The IGS tracking network stations are not homogeneously distributed around the world. The large gaps of this network in Middle East, e.g., Iran plateau, reduce the accuracy of the IGS GIMs over this region. Empirical ionosphere models, such as international reference ionosphere (IRI), also provide coarse forecasts of the VTEC values. This paper presents a new regional VTEC model based on the IRI 2007 and global positioning system (GPS) observations from Iranian Permanent GPS Network. The model consists of a given reference part from IRI model and an unknown correction term. Compactly supported base functions are more appropriate than spherical harmonics in regional ionosphere modeling. Therefore, an unknown correction term was expanded in terms of B-spline functions. The obtained results are validated through comparison with the observed VTEC derived from GPS observations.     

Water Consumption of a Six-Year-Old River Red Gum Plantation in the Southern Zagros Mountains, Iran

Water is the most important limiting factor in the development of arid environments; therefore, optimization of water use is a necessity in desert reclamation projects. Evapotranspiration of a 6-year-old river red gum (Eucalyptus camaldulensis Dehnh.) plantation, located in a sedimentation basin of an artificial recharge of the Gareh Bygone Plain groundwater system in Iran’s southern Zagros Mountains, was studied during a 7-month period. A neutron moisture probe was used to monitor soil water changes in the root zone. Soil water depletion following rapid drainage for blocks receiving relatively high, medium and low volumes of floodwater were 809.6, 312.4, and 203.1 mm, respectively, for a 150-day period. Soil water potential during most of the study period was below -1.5 MPa. This study proves that river red gum in not a suitable species for desertification control where water conservation is of vital importance. Flood irrigation of trees on 8 Aug. 1991 provided the opportunity to throw doubt upon the claim of summer dormancy of river red gum.     

Vector ionosphere modeling by vector spherical Slepian base functions

GPS Solutions - Ionosphere and its spatial and temporal gradients play an important role in positioning and navigation using global navigation satellite systems (GNSS). This study intends to...     

Evaluation of groundwater vulnerability in El-Bahariya Oasis,Western Desert,Egypt, using modelling and GIS techniques: A case study

The Nubian Sandstone Aquifer (NSSA) is the main groundwater resource of the El-Bahariya Oasis, which is located in the middle of the Western Desert of Egypt. This aquifer is composed mainly of continental clastic sediments of sandstone with shale and clay intercalations of saturated thickness ranging between 100 and 1500 m. Vulnerability assessment to delineate areas that are more susceptible to contamination from anthropogenic sources has become an important element for sustainable resources management and land use planning. Accordingly, this research aims to estimate the vulnerability of NSSA by applying the DRASTIC model as well as utilising sensitivity analyses to evaluate the relative importance of the model parameters for aquifer vulnerability in the study area. The main objective is to demonstrate the combined use of the DRASTIC and the GIS techniques as an effective method for groundwater pollution risk assessment, and mapping the areas that are prone to deterioration of groundwater quality and quantity. Based on DRASTIC index (DI) values, a groundwater vulnerability map was produced using the GIS. The aquifer analysis in the study area highlighted the following key points: the northeastern and western parts of the NSSA were dominated by ‘High’ vulnerability classes while the northwestern and southeastern parts were characterised by ‘Medium’ vulnerability classes. The elevated central part of the study area displayed ‘Low’ aquifer vulnerability. The vulnerability map shows a relatively greater risk imposed on the northeastern part of the NSSA due to the larger pollution potential of intensive vegetable cultivation. Depth-to-water, topography and hydraulic conductivity parameters were found to be more effective in assessing aquifer vulnerability.     

Integration between morphometric parameters,hydrologic model,and geo-informatics techniques for estimating WADI runoff (case study WADI HALYAH—Saudi Arabia)

In arid and semiarid areas, the only surface and groundwater recharge source is the runoff generated through flash floods. Lack of hydrological data in such areas makes runoff estimation extremely complicated. Flash floods are considered catastrophic phenomena posing a major hazardous threat to cities, villages, and their infrastructures. The objective of this study is to assess the flash flood hazard and runoff in Wadi Halyah and its sub-basins. Integration of morphometric parameters, geo-informatics, and hydrological models has been done to overcome the challenge of scarcity of data.Advanced Spaceborne Thermal Emission and Reflection (ASTER) data was used to prepare a digital elevation model (DEM) with 30-m resolution, and geographical information system (GIS) was used in the evaluation of network, geometry, texture, and relief features of the morphometric parameters. Thirty-eight morphometric parameters were estimated and have been linked together for producing nine effective parameters for evaluation of the flash flood hazard in the study basin.Flash flood hazard in Wadi Halyah and its sub-basins was identified and grouped into three classes depending on nine effective parameters directly influencing the flood prone areas. Calculated runoff volume of Wadi Halyah ranges from 26.7 × 10⁶ to 111.4 × 10⁶ m³ with an inundation area of 15 and 27 km² at return periods of 5 and 100 years, respectively. Mathematical relationships among rainfall depth, runoff volume, infiltration losses, and rainfall excess demonstrate a strong directly proportional relationships with correlation coefficient of about 0.99.     

Stability analysis and optimization of the support system of an underground powerhouse cavern considering rock mass variability

Input parameters, such as rock mass strength parameters and deformation modulus, considered in the design of underground openings involve some uncertainty. The current uncertainty in these parameters is due to the inherent variability of these parameters. To quantify these parameters and design underground openings, the statistical methods must be utilized. In this research, a statistical method was used to define the GSI of rock mass (Geological Strength Index), block volume (V_b), and joint conditions (J_c). Using the GSI distribution function obtained from field data and intact rock strength characteristics, the statistical distribution functions of rock mass parameters were defined using the Monte Carlo method. The statistical analysis of the stability in Azad-pumped storage powerhouse cavern was carried out through the point estimate method. The appropriate support system was suggested according to the support pressure and the plastic zone around the cavern. This study showed the application of the statistical method, by combining the uncertainties of the intact rock strength and discontinuity parameters, in the assessment of the strength and deformability of rock masses and the support selection process in comparison with the deterministic methods.     

Experimental study of the effect of material and arrangement of electrodes and voltage on the electro-remediation of saturated clays containing chloride and sulfate ions

Electro-remediation process (ERP) is used for dewatering and decontaminating of the soil and improving its mechanical properties. In this study, the effect of voltage, electrode materials, and their arrangement on ERP were studied. The saturated clayey soil was remolded in four boxes at a dry density of 16.2 kN/m³. The process was performed in three stages. The chemical tests at the end of ERP indicated that the absorption of chloride ions in the anode may differ from 89 to 642% due to electro-migration phenomenon. The pH of the soil decreases in anode zone and increases towards the cathode zone. Up to 92% of the sulfate ions were transported and accumulated in the anode. However, in highly contaminated soil, the absorption ratio is 5% in the cathode due to the domination of electro-osmosis process. It was indicated that the electro-osmosis permeability coefficient (K_e) depends on the applied voltage, the soil type, and temperature and its reduction versus time is inversely related to applied voltage. Also, sulfate ions reduced by 74% in the anode due to a change in absorption direction. The results showed that the optimum configuration is linear along with a voltage of 18 V.