The seagrass skeletal assemblage from modern to fossil and from tropical to temperate: Insight from Maldivian and Mediterranean examples

Seagrasses are marine angiosperms that form extensive submarine meadows in the photic zone where carbonate producing biota dwell as epiphytes on the leaves or as infaunal forms, and act as prolific carbonate sediment factories. Because seagrasses have a low preservation potential and records of exceptionally well‐preserved and plant material from marine settings are rare, these palaeoenvironments are difficult to identify in the rock record. Consequently, sedimentological and palaeontological proxies are the main indicators of the presence of seagrass‐dominated ecosystems. This work investigates the skeletal assemblage of Modern (Maldivian and western Mediterranean) and fossil (Eocene; Apula and Oman carbonate platforms and Oligocene; Malta platform) seagrass examples to characterize the skeletal assemblage of modern and fossil seagrasses. Two main types of grains, calcareous algae and foraminifera, constitute around 50% of the bioclastic sediment in both tropical Maldivian and temperate Mediterranean scenarios. However, in the tropical setting they are represented by green algae (Halimeda), while in the Mediterranean they are represented by corallinacean red algae. In contrast, in the Eocene examples, the foraminifera are the most conspicuous group and the green algae are also abundant. The opposite occurs in the Maltese Chattian, which is dominated by coralline algae (mean 42%), although the foraminifera are still abundant. It is suggested to use the term foralgal to identify the seagrass skeletal assemblage. To discriminate between red algae and green algae dominance, the introduction of the prefixes ‘GA’ (green algae) and ‘RA’ (red algae) is proposed. The investigated examples provide evidence that the green algae–foralgal assemblage is typical of tropical, not excessively dense seagrass meadows, characterized by a well‐illuminated substrate to support the development and calcification of the Halimeda thallus. Contrarily, the red algae‐foralgal assemblage is typical of high density tropical to subtropical seagrass meadows which create very dense oligophotic conditions on the sea floor or in temperate settings where Halimeda cannot calcify.     

Rockfall seismic features analysis based on in situ tests:frequency,amplitude, and duration

In the seismic event classification,determining the seismic features of rockfall is significantly important for the automatic classification of seismic events because of the huge amount of raw data recorded by seismic stations in continuous monitoring. At the same time, the rockfall seismic features are still not completely understood.This study concentrates on the rockfall frequency content, amplitude(ground velocity), seismic waveform and duration analysis, of an artificial rockfall test at Torgiovannetto(a former quarry in Central Italy). A total of 90 blocks were released in the test, and their seismic signals and moving trajectories were recorded by four tri-axial seismic stations and four cameras, respectively. In the analysis processing,all the artificial rockfall signal traces were cut separately and the seismic features were extracted individually and automatically. In this study, the relationships between a) frequency content and impacted materials, b) frequency content and the distance between block releasing position and seismic station(source-receiver distance) were discussed. As a result, we found that the frequency content of rockfall focuses on 10-60 Hz and 80-90 Hz within a source-receiver distance of 200 m, and it is well correlated with impacted material and source-receiver distance. To evaluate the difference between earthquake and rockfall, 23 clear earthquake signals recorded in a seven month-long continuous seismic monitoring, carried out with the four seismic stations, were picked out, according to the Italian national earthquakes database(INGV). On these traces we performed the same analysis as in the artificial rockfall traces, and two parameters were defined to separate rockfall events from earthquake noise. The first one, the amplitude ratio, is related to the amplitude variation of rockfall between two stations and is greater than that of earthquakes, because of the higher attenuation occurring for rockfall events, which consists in high frequencies whereas for earthquakes it consists in low frequencies. The other parameter, the shape of waveform of signal trace, showed a significant difference between rockfall and earthquake and that could be a complementary feature to discriminate between both. This analysis of artificial rockfall is a first step helpful to understand the seismic characteristics of rockfall, and useful for rockfall seismic events classification in seismic monitoring of slope.     

Robust numerical implementation of a 3D rate-dependent model for reservoir geomechanical simulations

A 3D elasto-plastic rate-dependent model for rock mechanics is formulated and implemented into a Finite Element (FE) numerical code. The model is based on the approach proposed by Vermeer and Neher (A soft soil model that accounts for creep. In: Proceedings of the International Symposium “Beyond 2000 in Computational Geotechnics,” pages 249-261, 1999). An original strain-driven algorithm with an Inexact Newton iterative scheme is used to compute the state variables for a given strain increment.The model is validated against laboratory measurements, checked on a simplified test case, and used to simulate land subsidence due to groundwater and hydrocarbon production. The numerical results prove computationally effective and robust, thus allowing for the use of the model on real complex geological settings.     

Julius Obsequens’s book,Liber Prodigiorum: A Roman era record of meteorite falls,fireballs, and other celestial phenomena

Julius Obsequens was the pseudonym of a Roman historian presumably living in the 4th century ad , whose life is shrouded in mystery. All that is known about Obsequens’s biography is that he was the author of a book entitled Liber Prodigiorum (Book of Prodigies), a collection of prodigies deduced from Livy’s Ab Urbe Condita Libri (Books from the Founding of the City). The Liber Prodigiorum covered the period from 190 to 11 bc and gathered a chronological list of portents of various kinds (e.g., births of monstrous animals or men, statues that shed blood, voices from beyond the grave, epidemics, earthquakes, unidentified flying objects). Among these extraordinary reports, chronicles of celestial phenomena were also included. The interdisciplinary approach adopted in this research has clarified the nature of the events described in the text and has enabled the identification of new Italian meteorite falls that are not included in the Meteoritical Bulletin Database.     

How deep can forest vegetation cover extend their hydrological reinforcing contribution?

An experimental campaign was set up to quantify the contribution of evapotranspiration fluxes on hillslope hydrology and stability for different forest vegetation cover types. Three adjacent hillslopes, respectively, covered by hardwood, softwood, and grass were instrumented with nine access tubes each to monitor soil water dynamics at the three depths of 30, 60, and 100 cm, using a PR2/6 profile probe (Delta‐T Devices Ltd) for about 6 months including wet periods. Soil was drier under softwood and wetter under grass at all the three depths during most of the monitoring period. Matric suction derived via the soil moisture measurements was more responsive to changes in the atmospheric conditions and also recovered faster at the 30 cm depth. Results showed no significant differences between mean matric suction under hardwood (101.6 kPa) with that under either softwood or grass cover. However, a significant difference was found between mean matric suction under softwood (137.5 kPa) and grass (84.3 kPa). Results revealed that, during the wettest period, the hydrological effects from all three vegetation covers were substantial at the 30 cm depth, whereas the contribution from grass cover at 60 cm (2.0 kPa) and 100 cm (1.1 kPa) depths and from hardwood trees at 100 cm depth (1.2 kPa) was negligible. It is surmised that potential instability would have occurred at these larger depths along hillslopes where shallow hillslope failures are most likely to occur in the region. The hydrological effects from softwood trees, 8.1 and 3.9 kPa, were significant as the corresponding factor of safety values showed stable conditions at both depths of 60 and 100 cm, respectively. Therefore, the considerable hydrological reinforcing effects from softwood trees to the 100 cm depth suggest that a hillslope stability analysis would show that hillslopes with softwood trees will be stable even during the wet season.     

Fracturing and fluid‐flow during post‐rift subsidence in carbonates of the Jandaíra Formation,Potiguar Basin,NE Brazil

Pervasive fracture networks are common in many reservoir‐scale carbonate bodies even in the absence of large deformation and exert a major impact on their mechanical and flow behaviour. The Upper Cretaceous Jandaíra Formation is a few hundred meters thick succession of shallow water carbonates deposited during the early post‐rift stage of the Potiguar rift (NE Brazil). The Jandaíra Formation in the present onshore domain experienced <1.5 km thermal subsidence and, following Tertiary exhumation, forms outcrops over an area of >1000 km². The carbonates have a gentle, <5?, dip to the NE and are affected by few regional, low displacement faults or folds. Despite their simple tectonic history, carbonates display ubiquitous open fractures, sub‐vertical veins, and sub‐vertical as well as sub‐horizontal stylolites. Combining structural analysis, drone imaging, isotope studies and mathematical modelling, we reconstruct the fracturing history of the Jandaíra Formation during and following subsidence and analyse the impact fractures had on coeval fluid flow. We find that Jandaíra carbonates, fully cemented after early diagenesis, experienced negligible deformation during the first few hundreds of meters of subsidence but were pervasively fractured when they reached depths >400–500 m. Deformation was accommodated by a dense network of sub‐vertical mode I and hybrid fractures associated with sub‐vertical stylolites developed in a stress field characterised by a sub‐horizontal σ₁ and sub‐vertical σ₂. The development of a network of hybrid fractures, rarely reported in the literature, activated the circulation of waters charged in the mountainous region, flowing along the porous Açu sandstone underlying the Jandaíra carbonates and rising to the surface through the fractured carbonates. With persisting subsidence, carbonates reached depths of 800–900 m entering a depth interval characterised by a sub‐vertical σ₁. At this stage, sub‐horizontal stylolites developed liberating calcite which sealed the sub‐vertical open fractures transforming them in veins and preventing further flow. During Tertiary exhumation, several of the pre‐existing veins and stylolites opened and became longer, and new fractures were created typically with the same directions of the older features. The simplicity of our model suggests that most rocks in passive margin settings might have followed a similar evolution and thus display similar structures.     

国际矿物学协会新矿物及矿物命名委员会（CNMMN,IMA）1998年批准的新矿物

本文的资料是国际矿物学协会新矿物及矿物命名委员会提供的,以资矿物学家在新矿物研究工作中参考和对比。ＣＮＭＭＮ鼓励其成员将本文提交其所在国家的有关刊物发表。中译文由中国新矿物及矿物命名委员会供稿。文中所列的已经批准的新矿物的名称及其详细资料,将由每个新...     

Experiments on the effect of inflow and outflow sequences on suspended sediment exchange rates

In laboratory experiments, the influence of inflow and outflow sequences on the behavior of fine sedi-ment was investigated. The experimental set-up consisted of two interconnected rectangular basins, between which water was moved back and forth. Suspended sediment concentration in the main basin as well as the sediment exchange rates were derived from turbidity measurements.The suspended sediment ratio, SSR, and sediment exchange rates (influx sediment rate, ISR, and evacuated sediment rate, ESR) were measured. In twenty test runs, a parametric study on the magnitude and frequency of inflow and outflow cycles, the relative duration between inflow and outflow sequences, the initial sediment concentration, and the intake position was done. An initial test with stagnant water described the set-tling behavior of fine sediment and served as a reference scenario.The test results show that settling of fine particles near the intake/outlet structure can be considerably reduced by the nature of the inflow and outflow sequences. High cycle magnitude and frequency lead to maximum suspended sediment ratio in the system. For low discharges, the evolution of suspended sediment concentration cannot be directly correlated to the inflow and outflow cycles. However, compared to"no operation"conditions, the suspended sediment ratio could be increased by 10%to 40%locally. For high discharge, the evolution of suspended sediment concentration correlated with discharge cycles and suspended sediment ratios between 50%and 80%higher than for stagnant water could be achieved. Similar ratios could be obtained when the intake is located closer to the bottom or to the free water surface.Meanwhile, the overall sediment balance remained in equilibrium over the test period, indicating that the influx and evacuated sediment rates are not significantly influenced by the inflow and outflow cycles.