Nonlinear dynamic tests of a reinforced concrete frame building at different damage levels

This paper discusses the dynamic tests of a two-story infilled reinforced concrete (RC) frame building using an eccentric-mass shaker. The building, located in El Centro, CA, was substantially damaged prior to the tests due to the seismic activity in the area. During the testing sequence, five infill walls were removed to introduce additional damage states and to investigate the changes in the dynamic properties and the nonlinear response of the building to the induced excitations. The accelerations and displacements of the structure under the forced and ambient vibrations were recorded through an array of sensors, while lidar scans were obtained to document the damage. The test data provide insight into the nonlinear response of an actual building and the change of its resonant frequencies and operational shapes due to varying damage levels and changes of the excitation amplitude, frequency, and orientation.     

CHDS: conflict handling in direct sampling for stochastic simulation of spatial variables

Stochastic Environmental Research and Risk Assessment - In recent years, multiple-point geostatistical (MPS) approaches have gained significant popularity for modeling subsurface heterogeneity in...     

The Effect of Hydraulic Gradient and Pattern of Conduit Systems on Tracing Tests: Bench-Scale Modeling

Tracer breakthrough curves provide valuable information about the traced media, especially in inherently heterogeneous karst aquifers. In order to study the effect of variations in hydraulic gradient and conduit systems on breakthrough curves, a bench scale karst model was constructed. The bench scale karst model contains both matrix and a conduit. Eight tracing tests were conducted under a wide range of hydraulic gradients from 1 to greater than 5 for branchwork and network-conduit systems. Sampling points at varying distances from the injection point were utilized. Results demonstrate that mean tracer velocities, tracer mass recovery and linear rising slope of the breakthrough curves were directly controlled by hydraulic gradient. As hydraulic gradient increased, both one half the time for peak concentration and one fifth the time for peak concentration decreased. The results demonstrate the variations in one half the time for peak concentration and one fifth the time for peak concentration of the descending limb for different sampling points under differing hydraulic gradients are mainly controlled by the interactions of advection with dispersion. The results are discussed from three perspectives: different conduit systems, different hydraulic-gradient conditions, and different sampling points. The research confirmed the undeniable role of hydrogeological setting (i.e., hydraulic gradient and conduit system) on the shape of the breakthrough curve. The extracted parameters (mobile-fluid velocity, tracer-mass recovery, linear rising limb, one half the time for peak concentration, and one fifth the time for peak concentration) allow for differentiating hydrogeological settings and enhance interpretations the tracing tests in karst aquifers.     

Axial compressive bearing capacity of piles in ‎oil-contaminated sandy soil using FCV

ABSTRACT

Oil and its derivatives contaminate many soils and not only affect their chemical and biological properties but also their geotechnical properties. As oil contamination may deteriorate the functioning of piles, this paper addresses the effects of oil contamination on soil–pile interactions. Axial compressive bearing capacities of two close-ended, instrumented piles were investigated in different oil-contaminated sand using frustum confining vessel. Three different oils (gasoil, crude oil, and used motor oil) at different contamination levels were considered and using some strain gauges, the toe, shaft, and the net total bearing capacity of piles, as well as load distributions along the pile length, were derived. The results show that the presence of oil between soil particles has considerable adverse effects on bearing capacities of model piles, especially the shaft bearing capacity. The oil viscosity and percentage, as well as the contaminated sand bed thickness around the piles, are the most influential parameters. The higher the oil viscosity and oil content, the lower the values of the piles’ bearing capacities in comparison to the uncontaminated sand. With some modifications on the bearing capacity parameters of CFEM method, a good agreement was observed between measured and calculated bearing capacity values.     

Regional Variations of the <Emphasis Type="Italic">ω</Emphasis>-upper Bound Magnitude of GIII Distribution in the Iranian Plateau

The Iranian Plateau does not appear to be a single crustal block, but an assemblage of zones comprising the Alborz—Azerbaijan, Zagros, Kopeh—Dagh, Makran, and Central and East Iran. The Gumbel’s III asymptotic distribution method (GIII) and maximum magnitude expected by Kijko—Sellevoll method is applied in order to check the potentiality of the each seismogenic zone in the Iranian Plateau for the future occurrence of maximum magnitude (M_max). For this purpose, a homogeneous and complete seismicity database of the instrumental period during 1900–2012 is used in 29 seismogenic zones of the examined region. The spatial mapping of hazard parameters (upper bound magnitude (ω), most probable earthquake magnitude in next 100 years (M₁₀₀) and maximum magnitude expected by maximum magnitude estimated by Kijko—Sellevoll method (max M_{K ? S}^max) reveals that Central and East Iran, Alborz and Azerbaijan, Kopeh—Dagh and SE Zagros are a dangerous place for the next occurrence of a large earthquake.     

Spatial distribution of cadmium and lead in the sediments of the western Anzali wetlands on the coast of the Caspian Sea (Iran)

Spatial distribution patterns of total cadmium (Cd) and lead (Pb), their bioavailable fractions and total organic matter in sediment from Anzali wetlands are provided. Total sediment Pb was higher than Cd (34.95 versus 0.024 μg/g dry weight). The geoaccumulation index indicated that the sediment was “uncontaminated”, but some stations were categorized as “unpolluted” to “moderately polluted”. Less than 0.01 of Pb existed in exchangeable and carbonate fractions. The sum of exchangeable and carbonate-bound fractions of Cd was 42%, suggesting that Cd poses high risk to the aquatic ecosystems. Total Cd and Pb exhibited positive relationships with total organic matter. Considering spatial distribution maps of total and bioavailable fractions of metals suggested that high concentrations of metals does not necessarily indicate high bioavailable fraction. The methodologies we used in this study can be in more effective management of aquatic ecosystems, as well as ecological risk assessment of metals, and remediation programs.     

The Effect of Impervious Clay Core Shape on the Stability of Embankment Dams

One of the most important dangers that treat earth dams which can lead to interior failure over a prolonged period is the hydraulic fracturing factor. In the case of zoned dams, due to differences in stiffness of the core and its abutment zone, differential settlements occur between them. This factor is responsible for the arching phenomenon. Differential settlements between core and shell cause cracks within the core initially sub-surface, Those cracks may develop the first impounding causing internal erosion on the dam core. In this research, using a computer modeling of Ghavoshan rockfill dam (located the west part of Iran) as a case study computed by SIGMA/W program, the role of the dam core shape on those factors is demonstrated. It is found that an inclined core shape is preferred in a condition that is especially important settlements of construction during for dam body. The result of finite element analysis indicates desired conditions from the point of view of stress, deformation and resistance against hydraulic fracturing for the same width of dam designs. Moreover, this can be higher priority for embankment dam designs.     

Comparison of LLR,MLP, Elman,NNARX and ANFIS Models—with a case study in solar radiation estimation

Despite the widespread application of nonlinear mathematical models, comparative studies of different models are still a huge task for modellers. This is because a large number of trial and error processes are needed to develop each model, so the workload will be multiplied into an unmanageable level if many types of models are involved. This study presents an efficient approach by using the Gamma test (GT) to select the input variables and the training data length, so that the trial and error workload can be greatly reduced. The methodology is tested in estimating solar radiation at the Brue catchment, UK. Several nonlinear models have been developed efficiently with the aid of the GT, including local linear regression, multi-layer perceptron (MLP), Elman neural network, neural network auto-regressive model with exogenous inputs (NNARX) and adaptive neuro-fuzzy inference system (ANFIS). This work is only feasible within the time and resources constraint, due to the GT in reducing huge workload of the trial and error process.     

Application of the Dynamic Cone Penetrometer (DCP) for determination of the engineering parameters of sandy soils

Determination of the in situ engineering properties of foundation materials has always been a challenge for geotechnical engineers and, thus, several methods have been developed so far. Dynamic Cone Penetration (DCP) test is one of the most versatile amongst them. In the present research, a light weight simple DCP device was developed and used for evaluation of the engineering properties of sandy soils in laboratory conditions. The device consisted of an 8-kg hammer that drops over a height of 575 mm, and drives a 60° cone tip with 20 mm base diameter into the ground. To control the validation of the results, laboratory direct shear and plate load tests were used as reference tests. The soil sample was a poorly graded sandy soil (SP) taken from alluvial deposits of the Tehran plain. All DCP tests and PLTs were undertaken on compacted soil in a mould with 700 mm diameter and 700 mm height. Based on the results of the experiments, the relationships between Dynamic Penetration Index (DPI), relative density (D_r), modulus of elasticity (E), shear modulus (G), modulus of subgrade reaction (K_S), and the friction angle of the soil were obtained with a high coefficient of determination (> 90%). The repeatability of the test results was also evaluated by calculating the coefficient of variations (C_v), which was less than 30% for all tests.     

A Geometric Computational Model for Calculation of Longwall Face Effect on Gate Roadways

In this paper a geometric computational model (GCM) has been developed for calculating the effect of longwall face on the extension of excavation-damaged zone (EDZ) above the gate roadways (main and tail gates), considering the advance longwall mining method. In this model, the stability of gate roadways are investigated based on loading effects due to EDZ and caving zone (CZ) above the longwall face, which can extend the EDZ size. The structure of GCM depends on four important factors: (1) geomechanical properties of hanging wall, (2) dip and thickness of coal seam, (3) CZ characteristics, and (4) pillar width. The investigations demonstrated that the extension of EDZ is a function of pillar width. Considering the effect of pillar width, new mathematical relationships were presented to calculate the face influence coefficient and characteristics of extended EDZ. Furthermore, taking GCM into account, a computational algorithm for stability analysis of gate roadways was suggested. Validation was carried out through instrumentation and monitoring results of a longwall face at Parvade-2 coal mine in Tabas, Iran, demonstrating good agreement between the new model and measured results. Finally, a sensitivity analysis was carried out on the effect of pillar width, bearing capacity of support system and coal seam dip.